Simple Web
 
  
MIB module validation

StandardUpload, flexibleBy URL, flexible



Validation report

URL: http://www.simpleweb.org/ietf/mibs/modules/test/COFFEE-POT-MIB

Severity level requested: 3


Line Severity Problem
0 [1] http://www.simpleweb.org/ietf/mibs/modules/test/COFFEE-POT-MIB: Operation now in progress
 [1] (null): Operation now in progress
 smilint: cannot locate module `http://www.simpleweb.org/ietf/mibs/modules/test/COFFEE-POT-MIB'


   [1] http://www.simpleweb.org/ietf/mibs/modules/test/COFFEE-POT-MIB: Operation now in progress
   [1] (null): Operation now in progress
   smilint: cannot locate module `http://www.simpleweb.org/ietf/mibs/modules/test/COFFEE-POT-MIB'
       COFFEE-POT-MIB DEFINITIONS ::= BEGIN
       
       IMPORTS
           MODULE-IDENTITY, OBJECT-TYPE,
           Integer32, transmission
               FROM SNMPv2-SMI
           TimeInterval, DisplayString
               FROM SNMPv2-TC;
       
       coffee MODULE-IDENTITY
            LAST-UPDATED "9803231700Z"
            ORGANIZATION "Networked Appliance Management Working Group"
       
            CONTACT-INFO
                   "        Michael Slavitch
                            Loran Technologies,
                            955 Green Valley Crescent
                            Ottawa, Ontario Canada K2A 0B6
       
                       Tel: 613-723-7505
                       Fax: 613-723-7209
                    E-mail: slavitch@loran.com"
            DESCRIPTION
                   "The MIB Module for coffee vending devices."
           ::= { transmission 132 }
       
       potName OBJECT-TYPE
            SYNTAX     DisplayString (SIZE (0..255))
            MAX-ACCESS read-only
       
       
            STATUS current
            DESCRIPTION
                    "The vendor description of the pot under management"
            ::= { coffee 1 }
       
       
       potCapacity OBJECT-TYPE
            SYNTAX Integer32
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
               "The number of units of beverage supported by this device
                (regardless of its current state) ."
           ::= { coffee 2 }
       
       
       potType OBJECT-TYPE
            SYNTAX     INTEGER {
               automatic-drip(1),
               percolator(2),
               french-press(3),
               espresso(4)
               }
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                    "The brew type of the coffee pot."
            ::= { coffee 3 }
       
       potLocation OBJECT-TYPE
            SYNTAX     DisplayString (SIZE (0..255))
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                    "The physical location of the pot in question"
            ::= { coffee 4 }
       
       
       potMonitor            OBJECT IDENTIFIER ::= { coffee 6 }
       
       
       potOperStatus OBJECT-TYPE
            SYNTAX     INTEGER {
                            off(1),
                            brewing(2),
                            holding(3),
                            other(4),
                            waiting(5)
                            }
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                    "The operating status of the pot in question. Note
                     that this is a read-only feature. Current hardware
                     prevents us from changing the port state via SNMP."
            ::= { potMonitor 1 }
       
        potLevel OBJECT-TYPE
            SYNTAX     Integer32
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                    "The number of units of coffee under management. The
                     units of level are defined in potMetric below."
            ::= { potMonitor 2 }
       
        potMetric  OBJECT-TYPE
            SYNTAX     INTEGER {
                        espresso(1),
                        demi-tasse(2),
                        cup(3),
                        mug(4),
                        bucket(5)
                        }
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                    "The vendor description of the pot under management"
            ::= { potMonitor 3 }
       
       
       potStartTime OBJECT-TYPE
           SYNTAX     Integer32
           MAX-ACCESS read-write
           STATUS     current
           DESCRIPTION
                   "The time in seconds since Jan 1 1970 to start the pot
                    if and only if potOperStatus is waiting(5)"
           ::= { potMonitor 4 }
       
       
        lastStartTime OBJECT-TYPE
           SYNTAX     TimeInterval
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
       
       
                   "The amount of time, in TimeTicks, since the coffee
                   making process was initiated."
           ::= { potMonitor 5 }
       
       
        potTemperature OBJECT-TYPE
           SYNTAX     Integer32
           UNITS      "degrees Centigrade"
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "The ambient temperature of the coffee within the pot"
       
          ::= { potMonitor 6 }
       
       END