PARALLEL-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, Integer32 FROM SNMPv2-SMI InterfaceIndex FROM IF-MIB transmission FROM RFC1213-MIB MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF; para MODULE-IDENTITY LAST-UPDATED "9405261700Z" ORGANIZATION "IETF Character MIB Working Group" CONTACT-INFO " Bob Stewart Postal: Xyplex, Inc. 295 Foster Street Littleton, MA 01460 Tel: 508-952-4816 Fax: 508-952-4887 E-mail: rlstewart@eng.xyplex.com" DESCRIPTION "The MIB module for Parallel-printer-like hardware devices." ::= { transmission 34 } -- Generic Parallel-printer-like information paraNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ports (regardless of their current state) in the Parallel-printer-like port table." ::= { para 1 } -- the Parallel-printer-like Port table paraPortTable OBJECT-TYPE SYNTAX SEQUENCE OF ParaPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of port entries. The number of entries is given by the value of paraNumber." ::= { para 2 } paraPortEntry OBJECT-TYPE SYNTAX ParaPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Status and parameter values for a port." INDEX { paraPortIndex } ::= { paraPortTable 1 } ParaPortEntry ::= SEQUENCE { paraPortIndex InterfaceIndex, paraPortType INTEGER, paraPortInSigNumber Integer32, paraPortOutSigNumber Integer32 } paraPortIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ifIndex for the port. By convention and if possible, hardware port numbers map directly to external connectors. The value for each port must remain constant at least from one re-initialization of the network management agent to the next." ::= { paraPortEntry 1 } paraPortType OBJECT-TYPE SYNTAX INTEGER { other(1), centronics(2), dataproducts(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The port's hardware type." ::= { paraPortEntry 2 } paraPortInSigNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of input signals for the port in the input signal table (paraPortInSigTable). The table contains entries only for those signals the software can detect and that are useful to observe." ::= { paraPortEntry 3 } paraPortOutSigNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of output signals for the port in the output signal table (paraPortOutSigTable). The table contains entries only for those signals the software can assert and that are useful to observe." ::= { paraPortEntry 4 } -- Parallel-printer-like Input Signal Table paraInSigTable OBJECT-TYPE SYNTAX SEQUENCE OF ParaInSigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of port input control signal entries." ::= { para 3 } paraInSigEntry OBJECT-TYPE SYNTAX ParaInSigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Input control signal status for a hardware port." INDEX { paraInSigPortIndex, paraInSigName } ::= { paraInSigTable 1 } ParaInSigEntry ::= SEQUENCE { paraInSigPortIndex InterfaceIndex, paraInSigName INTEGER, paraInSigState INTEGER, paraInSigChanges Counter32 } paraInSigPortIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The value of paraPortIndex for the port to which this entry belongs." ::= { paraInSigEntry 1 } paraInSigName OBJECT-TYPE SYNTAX INTEGER { power(1), online(2), busy(3), paperout(4), fault(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Identification of a hardware signal." ::= { paraInSigEntry 2 } paraInSigState OBJECT-TYPE SYNTAX INTEGER { none(1), on(2), off(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current signal state." ::= { paraInSigEntry 3 } paraInSigChanges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the signal has changed from 'on' to 'off' or from 'off' to 'on'." ::= { paraInSigEntry 4 } -- Output Signal Table paraOutSigTable OBJECT-TYPE SYNTAX SEQUENCE OF ParaOutSigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of port output control signal entries." ::= { para 4 } paraOutSigEntry OBJECT-TYPE SYNTAX ParaOutSigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Output control signal status for a hardware port." INDEX { paraOutSigPortIndex, paraOutSigName } ::= { paraOutSigTable 1 } ParaOutSigEntry ::= SEQUENCE { paraOutSigPortIndex InterfaceIndex, paraOutSigName INTEGER, paraOutSigState INTEGER, paraOutSigChanges Counter32 } paraOutSigPortIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The value of paraPortIndex for the port to which this entry belongs." ::= { paraOutSigEntry 1 } paraOutSigName OBJECT-TYPE SYNTAX INTEGER { power(1), online(2), busy(3), paperout(4), fault(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Identification of a hardware signal." ::= { paraOutSigEntry 2 } paraOutSigState OBJECT-TYPE SYNTAX INTEGER { none(1), on(2), off(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current signal state." ::= { paraOutSigEntry 3 } paraOutSigChanges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the signal has changed from 'on' to 'off' or from 'off' to 'on'." ::= { paraOutSigEntry 4 } -- conformance information paraConformance OBJECT IDENTIFIER ::= { para 5 } paraGroups OBJECT IDENTIFIER ::= { paraConformance 1 } paraCompliances OBJECT IDENTIFIER ::= { paraConformance 2 } -- compliance statements paraCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMPv2 entities which have Parallel-printer-like hardware interfaces." MODULE -- this module MANDATORY-GROUPS { paraGroup } ::= { paraCompliances 1 } -- units of conformance paraGroup OBJECT-GROUP OBJECTS { paraNumber, paraPortIndex, paraPortType, paraPortInSigNumber, paraPortOutSigNumber, paraInSigPortIndex, paraInSigName, paraInSigState, paraInSigChanges, paraOutSigPortIndex, paraOutSigName, paraOutSigState, paraOutSigChanges } STATUS current DESCRIPTION "A collection of objects providing information applicable to all Parallel-printer-like interfaces." ::= { paraGroups 1 } END