WINS-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises, OBJECT-TYPE FROM RFC1155-SMI DisplayString FROM RFC1213-MIB; microsoft OBJECT IDENTIFIER ::= { enterprises 311 } software OBJECT IDENTIFIER ::= { microsoft 1 } wins OBJECT IDENTIFIER ::= { software 2 } par OBJECT IDENTIFIER ::= { wins 1 } pull OBJECT IDENTIFIER ::= { wins 2 } push OBJECT IDENTIFIER ::= { wins 3 } datafiles OBJECT IDENTIFIER ::= { wins 4 } cmd OBJECT IDENTIFIER ::= { wins 5 } -- WINS MIB -- Parameters (Prefix Par) parWinsStartTime OBJECT-TYPE SYNTAX DisplayString (SIZE (1..30)) ACCESS read-only STATUS mandatory DESCRIPTION "Wins start time" ::= { par 1 } parLastPScvTime OBJECT-TYPE SYNTAX DisplayString (SIZE (1..30)) ACCESS read-only STATUS mandatory DESCRIPTION "Most recent date and time at which planned scavenging took place. Planned scavenging happens at intervals specified in the registry. Scavenging involves changing owned non-refreshed entries to the released state. Further, replicas may be changed to tombstones, tombstones maye be deleted and revalidation of old replicas may take place" ::= { par 2 } parLastATScvTime OBJECT-TYPE SYNTAX DisplayString (SIZE (1..30)) ACCESS read-only STATUS mandatory DESCRIPTION "Most recent data and time at which scavenging as a result of administrative action took place" ::= { par 3 } parLastTombScvTime OBJECT-TYPE SYNTAX DisplayString (SIZE (1..30)) ACCESS read-only STATUS mandatory DESCRIPTION "Most recent data and time at which replica tombstone scavenging took place" ::= { par 4 } parLastVerifyScvTime OBJECT-TYPE SYNTAX DisplayString (SIZE (1..30)) ACCESS read-only STATUS mandatory DESCRIPTION "Most recent data and time at which revalidation of old active replicas took place" ::= { par 5 } parLastPRplTime OBJECT-TYPE SYNTAX DisplayString (SIZE (1..30)) ACCESS read-only STATUS mandatory DESCRIPTION "Most recent data and time at which planned replication took place. Planned replication happens at intervals specified in the registry" ::= { par 6 } parLastATRplTime OBJECT-TYPE SYNTAX DisplayString (SIZE (1..30)) ACCESS read-only STATUS mandatory DESCRIPTION "Most recent data and time at which administrator triggered replication took place." ::= { par 7 } parLastNTRplTime OBJECT-TYPE SYNTAX DisplayString (SIZE (1..30)) ACCESS read-only STATUS mandatory DESCRIPTION "Most recent data and time at which network triggered replication took place. Network triggered replication happens as a result of an update notification message from a remote WINS" ::= { par 8 } parLastACTRplTime OBJECT-TYPE SYNTAX DisplayString (SIZE (1..30)) ACCESS read-only STATUS mandatory DESCRIPTION "Most recent data and time at which address change triggered replication took place. Address change triggered replication happens when the address of an owned name changes due to a new registration" ::= { par 9 } parLastInitDbTime OBJECT-TYPE SYNTAX DisplayString (SIZE (1..30)) ACCESS read-only STATUS mandatory DESCRIPTION "Most recent data and time at which the local database was populated statically from one or more data files" ::= { par 10 } parLastCounterResetTime OBJECT-TYPE SYNTAX DisplayString (SIZE (1..30)) ACCESS read-only STATUS mandatory DESCRIPTION "Most recent data and time at which the local counters were initialized to zero" ::= { par 11 } parWinsTotalNoOfReg OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the number of registrations received" ::= { par 12 } parWinsTotalNoOfQueries OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the number of queries received" ::= { par 13 } parWinsTotalNoOfRel OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the number of releases received" ::= { par 14 } parWinsTotalNoOfSuccRel OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the number of releases that succeeded" ::= { par 15 } parWinsTotalNoOfFailRel OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the number of releases that failed" ::= { par 16 } parWinsTotalNoOfSuccQueries OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the number of queries that succeeded" ::= { par 17 } parWinsTotalNoOfFailQueries OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the number of queries that failed" ::= { par 18 } parRefreshInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the refresh interval. Unit is in milliseconds" ::= { par 19 } parTombstoneInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the tombstone interval, Unit is in milliseconds" ::= { par 20 } parTombstoneTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the tombstone timeout. Unit is in milliseconds" ::= { par 21 } parVerifyInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the verify interval Unit is in milliseconds." ::= { par 22 } parVersCounterStartValLowWord OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the low word of the version counter that WINS should start with" ::= { par 23 } parVersCounterStartValHighWord OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the High word of the version counter that WINS should start with" ::= { par 24 } parRplOnlyWCnfPnrs OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates whether or not replication should be done with non-configures pnrs. If not set to zero, replication will be done only with partners listed in the registry (except when an update notification comes in)" ::= { par 25 } parStaticDataInit OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates whether Static data should be read in at initialization and reconfiguration time. Update of any mib variable in the parameters group constitutes reconfigurations " ::= { par 26 } parLogFlag OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates whether logging should be done. Default behaviour is to do logging" ::= { par 27 } parLogFileName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This variable gives the path to the log file" ::= { par 28 } parBackupDirPath OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This variable gives the path to the backup dir" ::= { par 29 } parDoBackupOnTerm OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable specifies whether WINS should do backup on termination. Setting it 1 holds no meaning unless parBackupDirPath is set also" ::= { par 30 } parMigrateOn OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable specifies whether static records in the wins database should be treated as dynamic records during conflicts with new dynamic registrations." ::= { par 31 } -- datafiles group (Prefix df) dfDatafilesTable OBJECT-TYPE SYNTAX SEQUENCE OF DFDatafileEntry ACCESS read-write STATUS mandatory DESCRIPTION "A list of datafiles specified under the Datafiles key in the registry. These files are used for statically initialization of the WINS database" ::= { datafiles 1 } dfDatafileEntry OBJECT-TYPE SYNTAX DFDatafileEntry ACCESS read-write STATUS mandatory DESCRIPTION "data file name" INDEX { dfDatafileIndex } ::= { dfDatafilesTable 1 } DFDatafileEntry ::= SEQUENCE { dfDatafileIndex INTEGER, dfDatafileName DisplayString } dfDatafileIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "Used for indexing entries in the datafiles table. It has no other use" ::= { dfDatafileEntry 1 } dfDatafileName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Name of the datafile to use for static initialization" ::= { dfDatafileEntry 2 } -- pull group (Prefix pull) pullInitTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates whether pull should be done at WINS invocation and at reconfiguration. If any pull group's mib variable is set, that constitutes reconfiguration" ::= { pull 1 } pullCommRetryCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable gives the retry count in case of comm failure when doing pull replication. This is the max. number of retries that will be done at the interval specified for the Partner before WINS will stop for a certain number (canned) of replication time intervals before starting again." ::= { pull 2 } pullPnrTable OBJECT-TYPE SYNTAX SEQUENCE OF PullPnrEntry ACCESS read-write STATUS mandatory DESCRIPTION "A list of Partners with which pull replication needs to be done" ::= { pull 3 } pPullPnrEntry OBJECT-TYPE SYNTAX PullPnrEntry ACCESS read-write STATUS mandatory DESCRIPTION "This is the row corresponding to a partner" INDEX { pullPnrAdd } ::= { pullPnrTable 1 } PullPnrEntry ::= SEQUENCE { pullPnrAdd IpAddress, pullPnrSpTime DisplayString, pullPnrTimeInterval INTEGER, pullPnrMemberPrec Counter, pullPnrNoOfSuccRpls Counter, pullPnrNoOfCommFails Counter } pullPnrAdd OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This is the address of the remote WINS partner" ::= { pPullPnrEntry 1 } pullPnrSpTime OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This variable gives the specific time at which pull replication should occur" ::= { pPullPnrEntry 2 } pullPnrTimeInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable gives the time interval for pull replication" ::= { pPullPnrEntry 3 } pullPnrMemberPrec OBJECT-TYPE SYNTAX INTEGER { low(0), high(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This is the precedence to be given to members of the special group pulled from the WINS. Note: the precedence of locally registered members of a special group is more than any replicas pulled in" ::= { pPullPnrEntry 4 } pullPnrNoOfSuccRpls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times replication was successful with the WINS after invocation or reset of counters" ::= { pPullPnrEntry 5 } pullPnrNoOfCommFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times replication was unsuccessful with the WINS due to comm. failure (after invocation or reset of counters" ::= { pPullPnrEntry 6 } pullPnrVersNoLowWord OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The low word of the highest vers. no found in records owned by this WINS." ::= { pPullPnrEntry 7 } pullPnrVersNoHighWord OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The high word of the highest vers. no found in records owned by this WINS." ::= { pPullPnrEntry 8 } -- push group (Prefix - push) pushInitTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates whether a push (i.e. notification message) should be done at invocation." ::= { push 1 } pushRplOnAddChg OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates whether a notification message should be sent when address changes" ::= { push 2 } pushPnrTable OBJECT-TYPE SYNTAX SEQUENCE OF PushPnrEntry ACCESS read-write STATUS mandatory DESCRIPTION "A list of WINS Partners with which push replication is to be initiated" ::= { push 3 } pushPnrEntry OBJECT-TYPE SYNTAX PushPnrEntry ACCESS read-write STATUS mandatory DESCRIPTION "This is the row corresponding to the WINS pnr" INDEX { pushPnrAdd } ::= { pushPnrTable 1 } PushPnrEntry ::= SEQUENCE { pushPnrAdd INTEGER, pushPnrUpdateCount INTEGER } pushPnrAdd OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Address of the WINS partner" ::= { pushPnrEntry 1 } pushPnrUpdateCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the # of updates that should result in a push message" ::= { pushPnrEntry 2 } -- cmd group (Prefix - cmd) cmdPullTrigger OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This variable when set will cause the WINS to pull from the remote WINS identified by the IpAddress" ::= { cmd 1 } cmdPushTrigger OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This variable when set will cause the WINS to push a notification message to the remote WINS identified by the IpAddress" ::= { cmd 2 } cmdDeleteWins OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This variable when set will cause all information pertaining to a WINS (data records, context information to be deleted from the local WINS. Use this only when owner-address mapping table is getting to near capacity. NOTE: deletion of all information pertaining to the managed WINS is not permitted" ::= { cmd 3 } cmdDoScavenging OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable when set will cause WINS to do scavenging." ::= { cmd 4 } cmdDoStaticInit OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "When set WINS will do static initialization using the file specified as the value. If 0 is specified, WINS will do static initialization using the files specified in the registry (can be read-written using Datafile table" ::= { cmd 5 } cmdNoOfWrkThds OBJECT-TYPE SYNTAX INTEGER (1..4) ACCESS read-write STATUS mandatory DESCRIPTION "Sets the number of worker threads in WINS" ::= { cmd 6 } cmdPriorityClass OBJECT-TYPE SYNTAX INTEGER { normal(0), high(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set the priority class of WINS to normal or high" ::= { cmd 7 } cmdResetCounters OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Reset the counters. Value is ignored" ::= { cmd 8 } cmdDeleteDbRecs OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This variable when set will cause all date records pertaining to a WINS to be deleted from the local WINS. Note: Only data records are deleted." ::= { cmd 9 } cmdDRPopulateTable OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This variable can set to retrieve records of a WINS whose Ip address is provided. When set the table is populated right-away" ::= { cmd 10 } cmdDRDataRecordsTable OBJECT-TYPE SYNTAX SEQUENCE OF CmdDRRecordEntry ACCESS read-only STATUS mandatory DESCRIPTION "This is the table that stores the data records The records are sorted lexicographically by name Note: the table is cached (to save on overhead on WINS) To repopulate the table, set cmdDRDataRecordsTable mib var" ::= { cmd 11 } cmdDRRecordEntry OBJECT-TYPE SYNTAX CmdDRRecordEntry ACCESS read-write STATUS mandatory DESCRIPTION "data record owned by WINS whose address was specified when CmdDRRecordsTable was set" INDEX { cmdDRRecordName } ::= { cmdDRDataRecordsTable 1 } CmdDRRecordEntry ::= SEQUENCE { cmdDRRecordName DisplayString, cmdDRRecordAddress OCTET STRING, cmdDRRecordType INTEGER, cmdDRRecordPersistenceType INTEGER, cmdDRRecordState INTEGER } cmdDRRecordName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Name in the record" ::= { cmdDRRecordEntry 1 } cmdDRRecordAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Address(es) of the record. If the record is a multihomed record or a special group, the addresses are returned sequentially in pairs. Each pair is comprised of the address of the owner wins followed by the address of the machine (multihomed)/member (special group). Note: Following snmp's convention, the records are always returned in network byte order" ::= { cmdDRRecordEntry 2 } cmdDRRecordType OBJECT-TYPE SYNTAX INTEGER { unique(0), normalgroup(1), specialgroup(2), multihomed(3) } -- Note the above order should not be disturbed. It is same as -- in winsintf.h (WINSINTF_RECTYPE_E) ACCESS read-only STATUS mandatory DESCRIPTION "Type of the record" ::= {cmdDRRecordEntry 3 } cmdDRRecordPersistenceType OBJECT-TYPE SYNTAX INTEGER { static(0), dynamic(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Persistence type of the record" ::= { cmdDRRecordEntry 4 } cmdDRRecordState OBJECT-TYPE SYNTAX INTEGER { active(0), released(1), tombstone(2), deleted(3) } -- Note the above order should not be disturbed. It is same as -- in winsintf.h (WINSINTF_STATE_E) -- for a SET operation only released and deleted values are -- allowed ACCESS read-only STATUS mandatory DESCRIPTION "State of the record." ::= { cmdDRRecordEntry 5 } cmdWinsVersNoLowWord OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The low word of the version number counter of the WINS" ::= { cmd 12 } cmdWinsVersNoHighWord OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The high word of the version number counter of the WINS" ::= { cmd 13 } END