MSIPBOOTP-MIB DEFINITIONS ::= BEGIN -- -- Microsoft(R) BOOTP for Internet Protocol MIB -- -- This MIB defines the management information for the BOOTP -- Protocol. The information in this MIB is divided -- into 3 groups: -- -- 1. Global Group -- Contains the global information BOOTP protocol -- Information contained in this group is independent of the interfaces -- over which the protocol is enabled. -- -- 2. Interface Group -- Contains RIP configuration information and statistics specific -- to each interface. -- -- IMPORTS enterprises, OBJECT-TYPE, TimeTicks, Counter, IpAddress FROM RFC1155-SMI microsoft, software FROM MSFT-MIB; -- MSIPRIP2 -- microsoft OBJECT IDENTIFIER ::= { enterprises 311 } -- software OBJECT IDENTIFIER ::= { microsoft 1 } msipbootp OBJECT IDENTIFIER ::= { software 12 } -- -- groups in MSIPRIP2 -- global OBJECT IDENTIFIER ::= { msipbootp 1 } interface OBJECT IDENTIFIER ::= { msipbootp 2 } -- -- BOOTP Global Group -- -- Contains the global information for the BOOTP protocol -- Information contained in this group is independent of the -- interfaces over which the protocol is enabled. -- -- Global information consists of scalar variables which can be -- updated and table of DHCP/BOOTP servers to which packets will be -- sent. -- globalLoggingLevel OBJECT-TYPE SYNTAX INTEGER { none(1), error(2), warning(3), information(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Information logged can be None, Error only, Error + Warning, Error + Warn + Logging. This variable controls the amount of information logged" ::= { global 1 } globalMaxRecQueueSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Maximum size to use for queueing incoming packets." ::= { global 2 } globalServerCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of entries BOOTP server table" ::= { global 3 } -- -- the DHCP/BOOTP Server Table -- -- -- Entries in the BOOTP Server table are IP addresses of BOOTP servers -- to which request packets are forwarded. -- globalBOOTPServerTable OBJECT-TYPE SYNTAX SEQUENCE OF GlobalBOOTPServerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of BOOTP servers to which packets are sent by this router" ::= { global 4 } globalBOOTPServerEntry OBJECT-TYPE SYNTAX GlobalBOOTPServerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "BOOTP server entry. Contains the IP address of a BOOTP server" INDEX { globalBOOTPServerAddr } ::= { globalBOOTPServerTable 1 } GlobalBOOTPServerEntry ::= SEQUENCE { globalBOOTPServerAddr IpAddress, globalBOOTPServerTag INTEGER } globalBOOTPServerAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP Address of DHCP/BOOTP router" ::= { globalBOOTPServerEntry 1 } globalBOOTPServerTag OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "create : Creates an entry in the BOOTP Server table delete : Deletes an entry in the BOOTP Server table " ::= { globalBOOTPServerEntry 2 } -- -- BOOTP Interface group -- -- Contains BOOTP interface configuration information, BOOTP interface -- statistics and BOOTP interface binding information. Each type of -- information is stored in a table with one entry for each -- interface over which BOOTP is enabled. -- -- Asscociated with each entry in the Interface binding table is a -- list of entries in the -- -- Interface Address Table : List of address bound to an interface -- -- -- Interface Statistics Table. -- -- -- BOOTP statistics for each interface. Statistics include -- number of send/receive failures -- number of ARP Update Failures -- number of requests/replies received/discarded, -- ifStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF IfStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of BOOTP statistics for interfaces" ::= { interface 1 } ifStatsEntry OBJECT-TYPE SYNTAX IfStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "BOOTP interface statistics entry. Each entry contains counts of send/receive failures, requests/relies received/discarded, and ARP Update failures" INDEX { ifSEIndex } ::= { ifStatsTable 1 } IfStatsEntry ::= SEQUENCE { ifSEIndex INTEGER, ifSEState INTEGER, ifSESendFailures Counter, ifSEReceiveFailures Counter, ifSEArpUpdateFailures Counter, ifSERequestReceiveds Counter, ifSERequestDiscards Counter, ifSEReplyReceiveds Counter, ifSEReplyDiscards Counter } ifSEIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index for the BOOTP interface Statistics table" ::= { ifStatsEntry 1 } ifSEState OBJECT-TYPE SYNTAX INTEGER { enabled(1), bound(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Current state of BOOTP on this interface." ::= { ifStatsEntry 2 } ifSESendFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times a failure occurred while attempting to send a packet on this interface." ::= { ifStatsEntry 3 } ifSEReceiveFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times a failure occurred while attempting to receive a packet on this interface." ::= { ifStatsEntry 4 } ifSEArpUpdateFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times a failure occurred while attempting to update the ARP cache on this interface." ::= { ifStatsEntry 5 } ifSERequestReceiveds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of BOOTP REQUEST packets received on this interface." ::= { ifStatsEntry 6 } ifSERequestDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of BOOTP REQUEST packets discarded on this interface." ::= { ifStatsEntry 7 } ifSEReplyReceiveds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of BOOTP REPLY packets received on this interface." ::= { ifStatsEntry 8 } ifSEReplyDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of BOOTP REPLY packets discarded due to errors in the header." ::= { ifStatsEntry 9 } -- -- BOOTP Interface Configuration Table. -- -- -- BOOTP Interface config includes the interface setting for : -- -- Relay Modes, max hop count and minimum seconds since boot -- -- ifConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF IfConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "BOOTP Interface configuration table. List of subnets that require separate configuration in BOOTP." ::= { interface 2 } ifConfigEntry OBJECT-TYPE SYNTAX IfConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "BOOTP configuration entry for an interface. A single routing domain in a single subnet." INDEX { ifCEIndex } ::= { ifConfigTable 1 } IfConfigEntry ::= SEQUENCE { ifCEIndex INTEGER, ifCEState INTEGER, ifCERelayMode INTEGER, ifCEMaxHopCount INTEGER, ifCEMinSecondsSinceBoot INTEGER } ifCEIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index for BOOTP interface config. table." ::= { ifConfigEntry 1 } ifCEState OBJECT-TYPE SYNTAX INTEGER { enabled(1), bound(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Current state of BOOTP on this interface." ::= { ifConfigEntry 2 } ifCERelayMode OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Relay Mode for BOOTP request/reply packets " DEFVAL { enabled } ::= { ifConfigEntry 3 } ifCEMaxHopCount OBJECT-TYPE SYNTAX INTEGER (1..16) ACCESS read-write STATUS mandatory DESCRIPTION "Each time a BOOTP request is forwarded by the BOOTP relay agent the request packet's hop count is incremented. If the number of hops traversed by the packet exceeds the max hop count configured on a relay agent the request packet is discarded by that relay agent." DEFVAL { 4 } ::= { ifConfigEntry 4 } ifCEMinSecondsSinceBoot OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Each BOOTP request sent by a client contains the time since the client has booted. If the time since boot for the client exceeds the configured value of ifCEMinSecondsSinceBoot on a relay agent, the relay agent will forward the request. Otherwise it will discard the request." DEFVAL { 4 } ::= { ifConfigEntry 5 } -- -- Interface Binding Table. -- -- -- This table stores information pertaining to the binding state and the -- number of IP addresses bound to an interface. -- -- The list of IP address bound to an interface is maintained in the -- Interface Address Table -- ifBindingTable OBJECT-TYPE SYNTAX SEQUENCE OF IfBindingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing binding information for each interface." ::= { interface 3 } ifBindingEntry OBJECT-TYPE SYNTAX IfBindingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Binding information entry for an interface" INDEX { ifBindingIndex } ::= { ifBindingTable 1 } IfBindingEntry ::= SEQUENCE { ifBindingIndex INTEGER, ifBindingState INTEGER, ifBindingAddrCount INTEGER } ifBindingIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index for an interface entry in the binding table" ::= { ifBindingEntry 1 } ifBindingState OBJECT-TYPE SYNTAX INTEGER { enabled(1), bound(2) } ACCESS read-only STATUS mandatory DESCRIPTION "State of the interface binding" ::= { ifBindingEntry 2 } ifBindingAddrCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of IP address bound to this interface. This is also the number of entries in the Interface Address Table corresponding to this interface." ::= { ifBindingEntry 3 } -- -- Interface Address Table -- -- -- The Interface Address Table contains the list of address bound to -- each interface. -- -- This table is indexed by an interface number and an IP address. -- ifAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF IfAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of IP addresses bound to interfaces" ::= { interface 4 } ifAddressEntry OBJECT-TYPE SYNTAX IfAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry for an IP address for an interface" INDEX { ifAEIfIndex, ifAEAddress, ifAEMask } ::= { ifAddressTable 1 } IfAddressEntry ::= SEQUENCE { ifAEIfIndex INTEGER, ifAEAddress IpAddress, ifAEMask IpAddress } ifAEIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index corresponding to the Interface with which this entry is associated." ::= { ifAddressEntry 1 } ifAEAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Ip address bound to the associated interface." ::= { ifAddressEntry 2 } ifAEMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Address Mask associated with the IP address contained in the corresponding ifAEAddress field." ::= { ifAddressEntry 3 } END