VRRP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, Integer32, IpAddress, mib-2 FROM SNMPv2-SMI TEXTUAL-CONVENTION, RowStatus, MacAddress, TruthValue, TimeStamp FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF ifIndex FROM IF-MIB; vrrpMIB MODULE-IDENTITY LAST-UPDATED "200003030000Z" ORGANIZATION "IETF VRRP Working Group" CONTACT-INFO "Brian R. Jewell Postal: Copper Mountain Networks, Inc. 2470 Embarcadero Way Palo Alto, California 94303 Tel: +1 650 687 3367 E-Mail: bjewell@coppermountain.com" DESCRIPTION "This MIB describes objects used for managing Virtual Router Redundancy Protocol (VRRP) routers." REVISION "200003030000Z" -- 03 Mar 2000 DESCRIPTION "Initial version as published in RFC 2787." ::= { mib-2 68 } -- ******************************************************************* -- Textual Conventions -- ******************************************************************* VrId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A number which, along with an interface index (ifIndex), serves to uniquely identify a virtual router on a given VRRP router. A set of one or more associated addresses is assigned to a VRID." SYNTAX Integer32 (1..255) -- ******************************************************************* -- VRRP MIB Groups -- ******************************************************************* vrrpOperations OBJECT IDENTIFIER ::= { vrrpMIB 1 } vrrpStatistics OBJECT IDENTIFIER ::= { vrrpMIB 2 } vrrpConformance OBJECT IDENTIFIER ::= { vrrpMIB 3 } -- ******************************************************************* -- Start of MIB objects -- ******************************************************************* vrrpNodeVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value identifies the particular version of the VRRP supported by this node." ::= { vrrpOperations 1 } vrrpNotificationCntl OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the VRRP-enabled router will generate SNMP traps for events defined in this MIB. 'Enabled' results in SNMP traps; 'disabled', no traps are sent." DEFVAL { enabled } ::= { vrrpOperations 2 } -- ******************************************************************* -- VRRP Operations Table -- ******************************************************************* vrrpOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of 'vrrpOperEntry' items." ::= { vrrpOperations 3 } vrrpOperEntry OBJECT-TYPE SYNTAX VrrpOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vrrpOperTable containing the operational characteristics of a virtual router. On a VRRP router, a given virtual router is identified by a combination of the IF index and VRID. Rows in the table cannot be modified unless the value of `vrrpOperAdminState' is `disabled' and the `vrrpOperState' has transitioned to `initialize'." INDEX { ifIndex, vrrpOperVrId } ::= { vrrpOperTable 1 } VrrpOperEntry ::= SEQUENCE { vrrpOperVrId VrId, vrrpOperVirtualMacAddr MacAddress, vrrpOperState INTEGER, vrrpOperAdminState INTEGER, vrrpOperPriority Integer32, vrrpOperIpAddrCount Integer32, vrrpOperMasterIpAddr IpAddress, vrrpOperPrimaryIpAddr IpAddress, vrrpOperAuthType INTEGER, vrrpOperAuthKey OCTET STRING, vrrpOperAdvertisementInterval Integer32, vrrpOperPreemptMode TruthValue, vrrpOperVirtualRouterUpTime TimeStamp, vrrpOperProtocol INTEGER, vrrpOperRowStatus RowStatus } vrrpOperVrId OBJECT-TYPE SYNTAX VrId MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains the Virtual Router Identifier (VRID)." ::= { vrrpOperEntry 1 } vrrpOperVirtualMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The virtual MAC address of the virtual router. Although this object can be derived from the 'vrrpOperVrId' object, it is defined so that it is easily obtainable by a management application and can be included in VRRP-related SNMP traps." ::= { vrrpOperEntry 2 } vrrpOperState OBJECT-TYPE SYNTAX INTEGER { initialize(1), backup(2), master(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the virtual router. This object has three defined values: - `initialize', which indicates that all the virtual router is waiting for a startup event. - `backup', which indicates the virtual router is monitoring the availability of the master router. - `master', which indicates that the virtual router is forwarding packets for IP addresses that are associated with this router. Setting the `vrrpOperAdminState' object (below) initiates transitions in the value of this object." ::= { vrrpOperEntry 3 } vrrpOperAdminState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object will enable/disable the virtual router function. Setting the value to `up', will transition the state of the virtual router from `initialize' to `backup' or `master', depending on the value of `vrrpOperPriority'. Setting the value to `down', will transition the router from `master' or `backup' to `initialize'. State transitions may not be immediate; they sometimes depend on other factors, such as the interface (IF) state. The `vrrpOperAdminState' object must be set to `down' prior to modifying the other read-create objects in the conceptual row. The value of the `vrrpOperRowStatus' object (below) must be `active', signifying that the conceptual row is valid (i.e., the objects are correctly set), in order for this object to be set to `up'." DEFVAL { down } ::= { vrrpOperEntry 4 } vrrpOperPriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to indicate that this router has ceased to participate in VRRP and a backup virtual router should transition to become a new master. A priority of 255 is used for the router that owns the associated IP address(es)." DEFVAL { 100 } ::= { vrrpOperEntry 5 } vrrpOperIpAddrCount OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the vrrpAssoIpAddrTable that correspond to a given IF index/VRID pair." ::= { vrrpOperEntry 6 } vrrpOperMasterIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The master router's real (primary) IP address. This is the IP address listed as the source in VRRP advertisement last received by this virtual router." ::= { vrrpOperEntry 7 } vrrpOperPrimaryIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "In the case where there is more than one IP address for a given `ifIndex', this object is used to specify the IP address that will become the `vrrpOperMasterIpAddr', should the virtual router transition from backup to master. If this object is set to 0.0.0.0, the IP address which is numerically lowest will be selected." DEFVAL { '00000000'H } -- 0.0.0.0 ::= { vrrpOperEntry 8 } vrrpOperAuthType OBJECT-TYPE SYNTAX INTEGER { noAuthentication(1), -- VRRP protocol exchanges are not -- authenticated. simpleTextPassword(2), -- Exchanges are authenticated by a -- clear text password. ipAuthenticationHeader(3) -- Exchanges are authenticated using -- the IP authentication header. } MAX-ACCESS read-create STATUS current DESCRIPTION "Authentication type used for VRRP protocol exchanges between virtual routers. This value of this object is the same for a given ifIndex. New enumerations to this list can only be added via a new RFC on the standards track." DEFVAL { noAuthentication } ::= { vrrpOperEntry 9 } vrrpOperAuthKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The Authentication Key. This object is set according to the value of the 'vrrpOperAuthType' object ('simpleTextPassword' or 'ipAuthenticationHeader'). If the length of the value is less than 16 octets, the agent will left adjust and zero fill to 16 octets. The value of this object is the same for a given ifIndex. When read, vrrpOperAuthKey always returns an Octet String of length zero." ::= { vrrpOperEntry 10 } vrrpOperAdvertisementInterval OBJECT-TYPE SYNTAX Integer32 (1..255) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The time interval, in seconds, between sending advertisement messages. Only the master router sends VRRP advertisements." DEFVAL { 1 } ::= { vrrpOperEntry 11 } vrrpOperPreemptMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Controls whether a higher priority virtual router will preempt a lower priority master." DEFVAL { true } ::= { vrrpOperEntry 12 } vrrpOperVirtualRouterUpTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "This is the value of the `sysUpTime' object when this virtual router (i.e., the `vrrpOperState') transitioned out of `initialized'." ::= { vrrpOperEntry 13 } vrrpOperProtocol OBJECT-TYPE SYNTAX INTEGER { ip (1), bridge (2), decnet (3), other (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The particular protocol being controlled by this Virtual Router. New enumerations to this list can only be added via a new RFC on the standards track." DEFVAL { ip } ::= { vrrpOperEntry 14 } vrrpOperRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used in accordance to installation and removal conventions for conceptual rows. The rowstatus of a currently active row in the vrrpOperTable is constrained by the operational state of the corresponding virtual router. When `vrrpOperRowStatus' is set to active(1), no other objects in the conceptual row, with the exception of `vrrpOperAdminState', can be modified. Prior to setting the `vrrpOperRowStatus' object from `active' to a different value, the `vrrpOperAdminState' object must be set to `down' and the `vrrpOperState' object be transitioned to `initialize'. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the `vrrpOperRowStatus' column will be read as notReady(3). In particular, a newly created row cannot be made active(1) until (minimally) the corresponding instance of `vrrpOperVrId' has been set and there is at least one active row in the `vrrpAssoIpAddrTable' defining an associated IP address for the virtual router." ::= { vrrpOperEntry 15 } -- ******************************************************************* -- VRRP Associated IP Address Table -- ******************************************************************* vrrpAssoIpAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpAssoIpAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of addresses associated with this virtual router." ::= { vrrpOperations 4 } vrrpAssoIpAddrEntry OBJECT-TYPE SYNTAX VrrpAssoIpAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table contains an IP address that is associated with a virtual router. The number of rows for a given ifIndex and VrId will equal the number of IP addresses associated (e.g., backed up) by the virtual router (equivalent to 'vrrpOperIpAddrCount'). Rows in the table cannot be modified unless the value of `vrrpOperAdminState' is `disabled' and the `vrrpOperState' has transitioned to `initialize'." INDEX { ifIndex, vrrpOperVrId, vrrpAssoIpAddr } ::= { vrrpAssoIpAddrTable 1 } VrrpAssoIpAddrEntry ::= SEQUENCE { vrrpAssoIpAddr IpAddress, vrrpAssoIpAddrRowStatus RowStatus } vrrpAssoIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The assigned IP addresses that a virtual router is responsible for backing up." ::= { vrrpAssoIpAddrEntry 1 } vrrpAssoIpAddrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of an associated address for a virtual router. Destroying the entry or setting it to notInService(2) removes the associated address from the virtual router. The use of other values is implementation-dependent." ::= { vrrpAssoIpAddrEntry 2 } -- ******************************************************************* -- VRRP Router Statistics -- ******************************************************************* vrrpRouterChecksumErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received with an invalid VRRP checksum value." ::= { vrrpStatistics 1 } vrrpRouterVersionErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received with an unknown or unsupported version number." ::= { vrrpStatistics 2 } vrrpRouterVrIdErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received with an invalid VRID for this virtual router." ::= { vrrpStatistics 3 } -- ******************************************************************* -- VRRP Router Statistics Table -- ******************************************************************* vrrpRouterStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpRouterStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of virtual router statistics." ::= { vrrpStatistics 4 } vrrpRouterStatsEntry OBJECT-TYPE SYNTAX VrrpRouterStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing statistics information about a given virtual router." AUGMENTS { vrrpOperEntry } ::= { vrrpRouterStatsTable 1 } VrrpRouterStatsEntry ::= SEQUENCE { vrrpStatsBecomeMaster Counter32, vrrpStatsAdvertiseRcvd Counter32, vrrpStatsAdvertiseIntervalErrors Counter32, vrrpStatsAuthFailures Counter32, vrrpStatsIpTtlErrors Counter32, vrrpStatsPriorityZeroPktsRcvd Counter32, vrrpStatsPriorityZeroPktsSent Counter32, vrrpStatsInvalidTypePktsRcvd Counter32, vrrpStatsAddressListErrors Counter32, vrrpStatsInvalidAuthType Counter32, vrrpStatsAuthTypeMismatch Counter32, vrrpStatsPacketLengthErrors Counter32 } vrrpStatsBecomeMaster OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times that this virtual router's state has transitioned to MASTER." ::= { vrrpRouterStatsEntry 1 } vrrpStatsAdvertiseRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP advertisements received by this virtual router." ::= { vrrpRouterStatsEntry 2 } vrrpStatsAdvertiseIntervalErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP advertisement packets received for which the advertisement interval is different than the one configured for the local virtual router." ::= { vrrpRouterStatsEntry 3 } vrrpStatsAuthFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received that do not pass the authentication check." ::= { vrrpRouterStatsEntry 4 } vrrpStatsIpTtlErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received by the virtual router with IP TTL (Time-To-Live) not equal to 255." ::= { vrrpRouterStatsEntry 5 } vrrpStatsPriorityZeroPktsRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received by the virtual router with a priority of '0'." ::= { vrrpRouterStatsEntry 6 } vrrpStatsPriorityZeroPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets sent by the virtual router with a priority of '0'." ::= { vrrpRouterStatsEntry 7 } vrrpStatsInvalidTypePktsRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of VRRP packets received by the virtual router with an invalid value in the 'type' field." ::= { vrrpRouterStatsEntry 8 } vrrpStatsAddressListErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received for which the address list does not match the locally configured list for the virtual router." ::= { vrrpRouterStatsEntry 9 } vrrpStatsInvalidAuthType OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with an unknown authentication type." ::= { vrrpRouterStatsEntry 10 } vrrpStatsAuthTypeMismatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with 'Auth Type' not equal to the locally configured authentication method (`vrrpOperAuthType')." ::= { vrrpRouterStatsEntry 11 } vrrpStatsPacketLengthErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with a packet length less than the length of the VRRP header." ::= { vrrpRouterStatsEntry 12 } -- ******************************************************************* -- Trap Definitions -- ******************************************************************* vrrpNotifications OBJECT IDENTIFIER ::= { vrrpMIB 0 } vrrpTrapPacketSrc OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The IP address of an inbound VRRP packet. Used by vrrpTrapAuthFailure trap." ::= { vrrpOperations 5 } vrrpTrapAuthErrorType OBJECT-TYPE SYNTAX INTEGER { invalidAuthType (1), authTypeMismatch (2), authFailure (3) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Potential types of configuration conflicts. Used by vrrpAuthFailure trap." ::= { vrrpOperations 6 } vrrpTrapNewMaster NOTIFICATION-TYPE OBJECTS { vrrpOperMasterIpAddr } STATUS current DESCRIPTION "The newMaster trap indicates that the sending agent has transitioned to 'Master' state." ::= { vrrpNotifications 1 } vrrpTrapAuthFailure NOTIFICATION-TYPE OBJECTS { vrrpTrapPacketSrc, vrrpTrapAuthErrorType } STATUS current DESCRIPTION "A vrrpAuthFailure trap signifies that a packet has been received from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type. Implementation of this trap is optional." ::= { vrrpNotifications 2 } -- ******************************************************************* -- Conformance Information -- ******************************************************************* vrrpMIBCompliances OBJECT IDENTIFIER ::= { vrrpConformance 1 } vrrpMIBGroups OBJECT IDENTIFIER ::= { vrrpConformance 2 } -- ................................................................... -- Compliance Statements -- ................................................................... vrrpMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The core compliance statement for all VRRP implementations." MODULE -- this module MANDATORY-GROUPS { vrrpOperGroup, vrrpStatsGroup } OBJECT vrrpOperPriority WRITE-SYNTAX Integer32 (1..255) DESCRIPTION "SETable values are from 1 to 255." ::= { vrrpMIBCompliances 1 } -- ................................................................... -- Conformance Groups -- ................................................................... vrrpOperGroup OBJECT-GROUP OBJECTS { vrrpNodeVersion, vrrpNotificationCntl, vrrpOperVirtualMacAddr, vrrpOperState, vrrpOperAdminState, vrrpOperPriority, vrrpOperIpAddrCount, vrrpOperMasterIpAddr, vrrpOperPrimaryIpAddr, vrrpOperAuthType, vrrpOperAuthKey, vrrpOperAdvertisementInterval, vrrpOperPreemptMode, vrrpOperVirtualRouterUpTime, vrrpOperProtocol, vrrpOperRowStatus, vrrpAssoIpAddrRowStatus } STATUS current DESCRIPTION "Conformance group for VRRP operations." ::= { vrrpMIBGroups 1 } vrrpStatsGroup OBJECT-GROUP OBJECTS { vrrpRouterChecksumErrors, vrrpRouterVersionErrors, vrrpRouterVrIdErrors, vrrpStatsBecomeMaster, vrrpStatsAdvertiseRcvd, vrrpStatsAdvertiseIntervalErrors, vrrpStatsAuthFailures, vrrpStatsIpTtlErrors, vrrpStatsPriorityZeroPktsRcvd, vrrpStatsPriorityZeroPktsSent, vrrpStatsInvalidTypePktsRcvd, vrrpStatsAddressListErrors, vrrpStatsInvalidAuthType, vrrpStatsAuthTypeMismatch, vrrpStatsPacketLengthErrors } STATUS current DESCRIPTION "Conformance group for VRRP statistics." ::= { vrrpMIBGroups 2 } vrrpTrapGroup OBJECT-GROUP OBJECTS { vrrpTrapPacketSrc, vrrpTrapAuthErrorType } STATUS current DESCRIPTION "Conformance group for objects contained in VRRP notifications." ::= { vrrpMIBGroups 3 } vrrpNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { vrrpTrapNewMaster, vrrpTrapAuthFailure } STATUS current DESCRIPTION "The VRRP MIB Notification Group." ::= { vrrpMIBGroups 4 } END