TRIP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32, Integer32, Counter32, mib-2 FROM SNMPv2-SMI -- [RFC2578] DateAndTime, TimeInterval, TruthValue, TimeStamp, StorageType, RowStatus FROM SNMPv2-TC -- [RFC2579] OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF -- [RFC2580] InetAddressType, InetAddress, InetPortNumber FROM INET-ADDRESS-MIB -- [RFC3291] applIndex, applRFC2788Group FROM NETWORK-SERVICES-MIB -- [RFC2788] TripItad, TripId, TripAppProtocol, TripAddressFamily, TripCommunityId, TripProtocolVersion, TripSendReceiveMode FROM TRIP-TC-MIB; -- [RFC3872] tripMIB MODULE-IDENTITY LAST-UPDATED "200409020000Z" -- Sep 02, 2004 ORGANIZATION "IETF IPTel Working Group. Mailing list: iptel@lists.bell-labs.com" CONTACT-INFO "Co-editor David Zinman postal: 265 Ridley Blvd. Toronto ON, M5M 4N8 Canada email: dzinman@rogers.com phone: +1 416 433 4298 Co-editor: David Walker Sedna Wireless Inc. postal: 495 March Road, Suite 500 Ottawa, ON K2K 3G1 Canada email: david.walker@sedna-wireless.com phone: +1 613 878 8142 Co-editor Jianping Jiang Syndesis Limited postal: 30 Fulton Way Richmond Hill, ON L4B 1J5 Canada email: jjiang@syndesis.com phone: +1 905 886-7818 x2515 " DESCRIPTION "The MIB module describing Telephony Routing over IP (TRIP). TRIP is a policy driven inter-administrative domain protocol for advertising the reachability of telephony destinations between location servers (LS), and for advertising attributes of the routes to those destinations. Copyright (C) The Internet Society (2004). This version of this MIB module is part of RFC 3872, see the RFC itself for full legal notices." REVISION "200409020000Z" -- Sep 02, 2004 DESCRIPTION "The initial version, Published as RFC 3872." ::= { mib-2 116 } tripMIBNotifications OBJECT IDENTIFIER ::= { tripMIB 0 } tripMIBObjects OBJECT IDENTIFIER ::= { tripMIB 1 } tripMIBConformance OBJECT IDENTIFIER ::= { tripMIB 2 } tripMIBNotifObjects OBJECT IDENTIFIER ::= { tripMIB 3 } tripMIBCompliances OBJECT IDENTIFIER ::= { tripMIBConformance 1 } tripMIBGroups OBJECT IDENTIFIER ::= { tripMIBConformance 2 } -- -- tripCfgTable -- tripCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF TripCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the common configuration objects applicable to all TRIP applications referenced by the applIndex. Each row represents those objects for a particular TRIP LS present in this system. The instances of TRIP LS's are uniquely identified by the applIndex. The objects in this table SHOULD be nonVolatile and survive a reboot." ::= { tripMIBObjects 1 } tripCfgEntry OBJECT-TYPE SYNTAX TripCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of common configuration." INDEX { applIndex } ::= { tripCfgTable 1 } TripCfgEntry ::= SEQUENCE { tripCfgProtocolVersion TripProtocolVersion, tripCfgItad TripItad, tripCfgIdentifier TripId, tripCfgAdminStatus INTEGER, tripCfgOperStatus INTEGER, tripCfgAddrIAddrType InetAddressType, tripCfgAddr InetAddress, tripCfgPort InetPortNumber, tripCfgMinItadOriginationInterval Unsigned32, tripCfgMinRouteAdvertisementInterval Unsigned32, tripCfgMaxPurgeTime Unsigned32, tripCfgDisableTime Unsigned32, tripCfgSendReceiveMode TripSendReceiveMode, tripCfgStorage StorageType } tripCfgProtocolVersion OBJECT-TYPE SYNTAX TripProtocolVersion MAX-ACCESS read-only STATUS current DESCRIPTION "This object will reflect the version of TRIP supported by this system. It follows the same format as TRIP version information contained in the TRIP messages generated by this TRIP entity." REFERENCE "RFC 3219, section 4.2." ::= { tripCfgEntry 1 } tripCfgItad OBJECT-TYPE SYNTAX TripItad MAX-ACCESS read-write STATUS current DESCRIPTION "The Internet Telephony Administrative domain (ITAD) of this LS." ::= { tripCfgEntry 2 } tripCfgIdentifier OBJECT-TYPE SYNTAX TripId MAX-ACCESS read-only STATUS current DESCRIPTION "The object that identifies this TRIP Client." ::= { tripCfgEntry 3 } tripCfgAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The desired TRIP state. up(1) : Set the application to normal operation. down(2): Set the application to a state where it will not process TRIP messages. Setting this object should be reflected in tripCfgOperStatus. If an unknown error occurs tripCfgOperStatus will return unknown(0)." ::= { tripCfgEntry 4 } tripCfgOperStatus OBJECT-TYPE SYNTAX INTEGER { unknown(0), up(1), down(2), faulty(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the TRIP protocol. unknown(0): The operating status of the application is unknown. up(1): The application is operating normally, and is ready to process (receive and issue) TRIP requests and responses. down(2): The application is currently not processing TRIP messages. This occurs if the TRIP application is in an initialization state or if tripCfgAdminStatus is set to down(2). faulty(3): The application is not operating normally due to a fault in the system. If tripCfgAdminStatus is down(2) then tripOperStatus SHOULD be down(2). If tripAdminStatus is changed to up(1) then tripOperStatus SHOULD change to up(1) if there is no fault that prevents the TRIP protocol from moving to the up(1) state." ::= { tripCfgEntry 5 } tripCfgAddrIAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of Inet Address of the tripAddr." REFERENCE "RFC 3291, section 3." ::= { tripCfgEntry 6 } tripCfgAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The network address of the local LS that the peer connects to. The type of address depends on the object tripCfgAddrIAddrType. The type of this address is determined by the value of the tripCfgAddrIAddrType object." REFERENCE "RFC 3291, section 3." ::= { tripCfgEntry 7 } tripCfgPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-write STATUS current DESCRIPTION "The local tcp/udp port on the local LS that the peer connects to." ::= { tripCfgEntry 8 } tripCfgMinItadOriginationInterval OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) UNITS "Seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum amount of time that MUST elapse between advertisement of the update message that reports changes within the LS's own ITAD." DEFVAL { 30 } ::= { tripCfgEntry 9 } tripCfgMinRouteAdvertisementInterval OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) UNITS "Seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies minimal interval between successive advertisements to a particular destination from an LS." DEFVAL { 30 } ::= { tripCfgEntry 10 } tripCfgMaxPurgeTime OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) UNITS "Seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the interval that the LS MUST maintain routes marked as withdrawn in its database." DEFVAL { 10 } ::= { tripCfgEntry 11 } tripCfgDisableTime OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) UNITS "Seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the interval that the TRIP module of the LS MUST be disabled while routes originated by this LS with high sequence numbers can be removed." DEFVAL { 180 } ::= { tripCfgEntry 12 } tripCfgSendReceiveMode OBJECT-TYPE SYNTAX TripSendReceiveMode MAX-ACCESS read-only STATUS current DESCRIPTION "The operational mode of the TRIP entity running on this system." ::= { tripCfgEntry 13 } tripCfgStorage OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-write STATUS current DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { tripCfgEntry 14 } -- -- TripRouteTypeTable -- tripRouteTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF TripRouteTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The TRIP peer Route Type table contains one entry per supported protocol - address family pair. The objects in this table are volatile and are refreshed after a reboot." ::= { tripMIBObjects 2 } tripRouteTypeEntry OBJECT-TYPE SYNTAX TripRouteTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information about the route type that a particular TRIP entity supports. Each entry represents information about either the local or a remote LS peer. The object tripRouteTypePeer is used to distinguish this. In the case of a local LS, the address/port information will reflect the values configured in tripCfgTable. In the case of a remote peer, the address/port information will reflect the values of an entry in the tripPeerTable. Implementation need to be aware that if the size of tripRouteTypeAddr exceeds 111 sub-IDs, then OIDs of column instances in this table will have more than 128 sub-IDs and cannot be accessed using SNMPv1, SNMPv2c, or snmpv3." INDEX { applIndex, tripRouteTypeAddrInetType, tripRouteTypeAddr, tripRouteTypePort, tripRouteTypeProtocolId, tripRouteTypeAddrFamilyId } ::= { tripRouteTypeTable 1 } TripRouteTypeEntry ::= SEQUENCE { tripRouteTypeAddrInetType InetAddressType, tripRouteTypeAddr InetAddress, tripRouteTypePort InetPortNumber, tripRouteTypeProtocolId TripAppProtocol, tripRouteTypeAddrFamilyId TripAddressFamily, tripRouteTypePeer INTEGER } tripRouteTypeAddrInetType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of Inet Address of the tripRouteTypeAddr." REFERENCE "RFC 3291, section 3." ::= { tripRouteTypeEntry 1 } tripRouteTypeAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The network address of this entry's TRIP peer LS. The type of this address is determined by the value of the tripRouteTypeAddrInetType object." REFERENCE "RFC 3291, section 3." ::= { tripRouteTypeEntry 2 } tripRouteTypePort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port for the TCP connection between this and an associated TRIP peer." ::= { tripRouteTypeEntry 3 } tripRouteTypeProtocolId OBJECT-TYPE SYNTAX TripAppProtocol MAX-ACCESS not-accessible STATUS current DESCRIPTION "The object identifier of a protocol that the associated peer is using." ::= { tripRouteTypeEntry 4 } tripRouteTypeAddrFamilyId OBJECT-TYPE SYNTAX TripAddressFamily MAX-ACCESS not-accessible STATUS current DESCRIPTION "The object identifier of an address family that the associated peer belongs to." ::= { tripRouteTypeEntry 5 } tripRouteTypePeer OBJECT-TYPE SYNTAX INTEGER { local(1), remote(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies whether this entry is associated with a 'local' or 'remote' LS peer." ::= { tripRouteTypeEntry 6 } -- -- tripSupportedCommunityTable -- tripSupportedCommunityTable OBJECT-TYPE SYNTAX SEQUENCE OF TripSupportedCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The list of TRIP communities that this LS supports. A TRIP community is a group of destinations that share common properties. The TRIP Supported Communities entry is used to group destinations so that the routing decision can be based on the identity of the group." REFERENCE "RFC 3219, section 5.9" ::= { tripMIBObjects 3 } tripSupportedCommunityEntry OBJECT-TYPE SYNTAX TripSupportedCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing information about a community. A TRIP community is a group of destinations that share some common property. This attribute is used so that routing decisions can be based on the identity of the group." INDEX { applIndex, tripSupportedCommunityId } ::= { tripSupportedCommunityTable 1 } TripSupportedCommunityEntry ::= SEQUENCE { tripSupportedCommunityId TripCommunityId, tripSupportedCommunityItad TripItad, tripSupportedCommunityStorage StorageType, tripSupportedCommunityRowStatus RowStatus } tripSupportedCommunityId OBJECT-TYPE SYNTAX TripCommunityId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The identifier of the supported Community." ::= { tripSupportedCommunityEntry 1 } tripSupportedCommunityItad OBJECT-TYPE SYNTAX TripItad MAX-ACCESS read-create STATUS current DESCRIPTION "The ITAD of the community." ::= { tripSupportedCommunityEntry 2 } tripSupportedCommunityStorage OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write- access to any columnar objects in the row. It is not a requirement that this storage be non volatile." DEFVAL { nonVolatile } ::= { tripSupportedCommunityEntry 3 } tripSupportedCommunityRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of the entry. This object is REQUIRED to create or delete rows by a manager. A value for tripSupportedCommunityItad MUST be set for row creation to be successful. If the instance already exists for a particular applIndex, the row create operation will fail. The value of this object has no effect on whether other objects in this conceptual row can be modified." ::= { tripSupportedCommunityEntry 4 } -- -- TripPeerTable -- tripPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF TripPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The TRIP peer table. This table contains one entry per TRIP peer, and information about the connection with the peer." ::= { tripMIBObjects 4 } tripPeerEntry OBJECT-TYPE SYNTAX TripPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing information about the connection with a TRIP peer. Implementation need to be aware that if the size of tripPeerRemoteAddr exceeds 113 sub-IDs, then OIDs of column instances in this table will have more than 128 sub-IDs and cannot be accessed using SNMPv1, SNMPv2c, or snmpv3." INDEX { applIndex, tripPeerRemoteAddrInetType, tripPeerRemoteAddr, tripPeerRemotePort } ::= {tripPeerTable 1} TripPeerEntry ::= SEQUENCE { tripPeerRemoteAddrInetType InetAddressType, tripPeerRemoteAddr InetAddress, tripPeerRemotePort InetPortNumber, tripPeerIdentifier TripId, tripPeerState INTEGER, tripPeerAdminStatus INTEGER, tripPeerNegotiatedVersion TripProtocolVersion, tripPeerSendReceiveMode TripSendReceiveMode, tripPeerRemoteItad TripItad, tripPeerConnectRetryInterval Unsigned32, tripPeerMaxRetryInterval Unsigned32, tripPeerHoldTime Unsigned32, tripPeerKeepAlive Unsigned32, tripPeerHoldTimeConfigured Unsigned32, tripPeerKeepAliveConfigured Unsigned32, tripPeerMaxPurgeTime Unsigned32, tripPeerDisableTime Unsigned32, tripPeerLearned TruthValue, tripPeerStorage StorageType, tripPeerRowStatus RowStatus } tripPeerRemoteAddrInetType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of Inet Address of the tripPeerRemoteAddr." REFERENCE "RFC 3291, section 3." ::= { tripPeerEntry 1 } tripPeerRemoteAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address of this entry's TRIP peer LS. The type of this address is determined by the value of the tripPeerRemoteAddrInetType object." REFERENCE "RFC 3291, section 3." ::= { tripPeerEntry 2 } tripPeerRemotePort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "The remote port for the TCP connection between the TRIP peers." ::= { tripPeerEntry 3 } tripPeerIdentifier OBJECT-TYPE SYNTAX TripId MAX-ACCESS read-only STATUS current DESCRIPTION "TRIP identifier of the peer." ::= { tripPeerEntry 4 } tripPeerState OBJECT-TYPE SYNTAX INTEGER { idle(1), connect(2), active(3), openSent(4), openConfirm(5), established(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "TRIP Peer Finite State Machine state. idle(1) : The initial state. Local LS refuses all incoming connections. No application resources are allocated to processing information about the remote peer. connect(2) : Local LS waiting for a transport protocol connection to be completed to the peer, and is listening for inbound transport connections from the peer. active(3) : Local LS is listening for an inbound connection from the peer, but is not in the process of initiating a connection to the remote peer. openSent(4) : Local LS has sent an OPEN message to its peer and is waiting for an OPEN message from the remote peer. openConfirm(5): Local LS has sent an OPEN message to the remote peer, received an OPEN message from the remote peer, and sent a KEEPALIVE message in response to the OPEN. The local LS is now waiting for a KEEPALIVE message or a NOTIFICATION message in response to its OPEN message. established(6): LS can exchange UPDATE, NOTIFICATION, and KEEPALIVE messages with its peer." ::= { tripPeerEntry 5 } tripPeerAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to affect the TRIP connection state. up(1) : Allow a connection with the peer LS. down(2) : disconnect the connection from the peer LS and do not allow any further connections to this peer. If this value is set to down(2) then tripPeerState will have the value of idle(1)." DEFVAL { up } ::= { tripPeerEntry 6 } tripPeerNegotiatedVersion OBJECT-TYPE SYNTAX TripProtocolVersion MAX-ACCESS read-only STATUS current DESCRIPTION "The negotiated version of TRIP running between this local entity and this peer." ::= { tripPeerEntry 7 } tripPeerSendReceiveMode OBJECT-TYPE SYNTAX TripSendReceiveMode MAX-ACCESS read-only STATUS current DESCRIPTION "The operational mode of this peer." ::= { tripPeerEntry 8 } tripPeerRemoteItad OBJECT-TYPE SYNTAX TripItad MAX-ACCESS read-only STATUS current DESCRIPTION "The Internet Telephony Administrative domain of this peer." ::= { tripPeerEntry 9 } tripPeerConnectRetryInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) UNITS "Seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the initial amount of time that will elapse between connection retry. This value SHOULD double after each attempt up to the value of tripPeerMaxRetryInterval. This value MUST always be less than or equal to the value of tripPeerMaxRetryInterval. Attempts to set this value higher than the max retry will not be allowed." DEFVAL { 120 } ::= { tripPeerEntry 10 } tripPeerMaxRetryInterval OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) UNITS "Seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the maximum amount of time that will elapse between connection retries. Once the value of tripPeerConnectRetryInterval has reached this value, no more retries will be attempted. Attempts to set this value lower than the retry interval SHOULD not be allowed." DEFVAL { 360 } ::= { tripPeerEntry 11 } tripPeerHoldTime OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) UNITS "Seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval in seconds for the hold timer that is established with the peer. The value of this object is the smaller of the values in tripPeerHoldTimeConfigured and the hold time received in the open message." ::= { tripPeerEntry 12 } tripPeerKeepAlive OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) UNITS "Seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the amount of time that MUST elapse between keep alive messages. This value is negotiated with the remote when a connection is established." ::= { tripPeerEntry 13 } tripPeerHoldTimeConfigured OBJECT-TYPE SYNTAX Unsigned32 (0 | 3..65535) UNITS "Seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the maximum time that MAY elapse between the receipt of successive keepalive or update message. A value of 0 means that keepalive or update messages will not be sent." DEFVAL { 240 } ::= { tripPeerEntry 14 } tripPeerKeepAliveConfigured OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) UNITS "Seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the amount of time that MUST elapse between keep alive messages." DEFVAL { 30 } ::= { tripPeerEntry 15 } tripPeerMaxPurgeTime OBJECT-TYPE SYNTAX Unsigned32 (1..65535) UNITS "Seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the interval that the LS MUST maintain routes marked as withdrawn in its database." DEFVAL { 10 } ::= { tripPeerEntry 16 } tripPeerDisableTime OBJECT-TYPE SYNTAX Unsigned32 (1..65535) UNITS "Seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicate the interval that the TRIP module of the remote peer LS MUST be disabled while routes originated by the local LS with high sequence numbers can be removed." DEFVAL { 180 } ::= { tripPeerEntry 17 } tripPeerLearned OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether this entry was learned or configured." DEFVAL { false } ::= { tripPeerEntry 18 } tripPeerStorage OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write- access to any columnar objects in the row. It is not a requirement that this storage be non volatile." DEFVAL { nonVolatile } ::= { tripPeerEntry 19 } tripPeerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of the entry. This object is REQUIRED to create or delete rows remotely by a manager. If the instance already exists for a particular applIndex, the row create operation will fail. The value of this object has no effect on whether other objects in this conceptual row can be modified. Entries in this table can be learned by the TRIP application, or provisioned through this table." ::= { tripPeerEntry 20 } -- -- TripPeerStatisticsTable -- tripPeerStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF TripPeerStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The TRIP peer stats table. This table contains one entry per remote TRIP peer, and statistics related to the connection with the remote peer. The objects in this table are volatile." ::= { tripMIBObjects 5 } tripPeerStatisticsEntry OBJECT-TYPE SYNTAX TripPeerStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing information about the connection with a TRIP peer." AUGMENTS { tripPeerEntry } ::= { tripPeerStatisticsTable 1 } TripPeerStatisticsEntry ::= SEQUENCE { tripPeerInUpdates Counter32, tripPeerOutUpdates Counter32, tripPeerInTotalMessages Counter32, tripPeerOutTotalMessages Counter32, tripPeerFsmEstablishedTransitions Counter32, tripPeerFsmEstablishedTime DateAndTime, tripPeerInUpdateElapsedTime TimeInterval, tripPeerStateChangeTime TimeStamp } tripPeerInUpdates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of TRIP update messages received from this remote peer since the last restart of this location server." ::= { tripPeerStatisticsEntry 1 } tripPeerOutUpdates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of TRIP update messages sent to this remote peer since the last restart of this LS." ::= { tripPeerStatisticsEntry 2 } tripPeerInTotalMessages OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of TRIP messages received from the remote peer on this connection since the last restart of this LS." ::= { tripPeerStatisticsEntry 3 } tripPeerOutTotalMessages OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of outgoing TRIP messages sent to the remote peer since the last restart of this LS." ::= { tripPeerStatisticsEntry 4 } tripPeerFsmEstablishedTransitions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the remote peer has transitioned into the established state since the last restart of this LS." ::= { tripPeerStatisticsEntry 5 } tripPeerFsmEstablishedTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the time and date that this remote peer entered the 'established' state." ::= { tripPeerStatisticsEntry 6 } tripPeerInUpdateElapsedTime OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "Elapsed time in hundredths of seconds since the last TRIP update message was received from this remote peer." ::= { tripPeerStatisticsEntry 7 } tripPeerStateChangeTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the last state change of tripPeerState took place." ::= { tripPeerStatisticsEntry 8 } -- TRIP Received Route Table. This table contains -- all routes from all sources. Each entry consists -- of a route and its associated path attributes. tripRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF TripRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The TRIP route table containing information about reachable routes that are to be added to service by the receiving LS. The objects in this table are volatile and are refreshed when this LS rediscovers its route table." ::= { tripMIBObjects 6 } tripRouteEntry OBJECT-TYPE SYNTAX TripRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a route to a called destination." INDEX { applIndex, tripRouteAppProtocol, tripRouteAddressFamily, tripRouteAddress, tripRoutePeer } ::= { tripRouteTable 1 } TripRouteEntry ::= SEQUENCE { tripRouteAppProtocol TripAppProtocol, tripRouteAddressFamily TripAddressFamily, tripRouteAddress OCTET STRING, tripRoutePeer TripId, tripRouteTRIBMask BITS, tripRouteAddressSequenceNumber Unsigned32, tripRouteAddressOriginatorId TripId, tripRouteNextHopServerIAddrType InetAddressType, tripRouteNextHopServer InetAddress, tripRouteNextHopServerPort InetPortNumber, tripRouteNextHopServerItad TripItad, tripRouteMultiExitDisc Unsigned32, tripRouteLocalPref Unsigned32, tripRouteAdvertisementPath OCTET STRING, tripRouteRoutedPath OCTET STRING, tripRouteAtomicAggregate TruthValue, tripRouteUnknown OCTET STRING, tripRouteWithdrawn TruthValue, tripRouteConverted TruthValue, tripRouteReceivedTime TimeStamp } tripRouteAppProtocol OBJECT-TYPE SYNTAX TripAppProtocol MAX-ACCESS not-accessible STATUS current DESCRIPTION "The protocol for which this entry of the routing table is maintained." ::= { tripRouteEntry 1 } tripRouteAddressFamily OBJECT-TYPE SYNTAX TripAddressFamily MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the type of address for the destination route." ::= { tripRouteEntry 2 } tripRouteAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..105)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the address (prefix) of the family type given by Address Family of the destination. It is the prefix of addresses reachable from this gateway via the next hop server. The SIZE value of 105 has been assigned due to the sub identifier of object types length limitation as defined in SMIv2." REFERENCE "RFC 3219, section 5.1.1.1." ::= { tripRouteEntry 3 } tripRoutePeer OBJECT-TYPE SYNTAX TripId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The identifier of the peer where the route information was learned." ::= { tripRouteEntry 4 } tripRouteTRIBMask OBJECT-TYPE SYNTAX BITS { adjTribIns(0), extTrib(1), locTrib(2), adjTribOut(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates which Telephony Routing Information Base (TRIB) this entry belongs to. This is a bit-map of possible types. If the bit has a value of 1, then the entry is a member of the corresponding TRIB type. If the bit has a value of 0 then the entry is not a member of the TRIP type. The various bit positions are: 0 adjTribIns The entry is of type adj-TRIBs-ins, stores routing information that has been learned from inbound UPDATE messages. 1 extTrib The entry is of type ext-TRIB, the best route for a given destination. 2 locTrib The entry is of type loc-TRIB contains the local TRIP routing information that the LS has selected. 3 adjTribOut The entry is of type adj-TRIBs-out, stores the information that the local LS has selected for advertisement to its external peers." REFERENCE "RFC 3291, section 3.5." ::= { tripRouteEntry 5 } tripRouteAddressSequenceNumber OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the version of the destination route originated by the LS identified by tripRouteAddressOriginatorId intra-domain attribute." ::= { tripRouteEntry 6 } tripRouteAddressOriginatorId OBJECT-TYPE SYNTAX TripId MAX-ACCESS read-only STATUS current DESCRIPTION "This is an intra-domain attribute indicating the internal LS that originated the route into the ITAD." ::= { tripRouteEntry 7 } tripRouteNextHopServerIAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of Inet Address of the tripRouteNextHopServer." REFERENCE "RFC 3291, section 3." ::= { tripRouteEntry 8 } tripRouteNextHopServer OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the next hop that messages of a given protocol destined for tripRouteAddress SHOULD be sent to. The type of this address is determined by the value of the tripRouteNextHopServerIAddrType object." ::= { tripRouteEntry 9 } tripRouteNextHopServerPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The port of the next hop server that this route will use." ::= { tripRouteEntry 10 } tripRouteNextHopServerItad OBJECT-TYPE SYNTAX TripItad MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the domain of the next hop." ::= { tripRouteEntry 11 } tripRouteMultiExitDisc OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The Multiple Exit Discriminator allows an LS to discriminate between, and indicate preference for, otherwise similar routes to a neighbouring domain. A higher value represents a more preferred routing object." REFERENCE "RFC 3219, section 5.8" ::= { tripRouteEntry 12 } tripRouteLocalPref OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicated the local LS's degree of preference for an advertised route destination." REFERENCE "RFC 3219, section 4.3.4.7" ::= { tripRouteEntry 13 } tripRouteAdvertisementPath OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4..252)) MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the sequence of domains through which this advertisement has passed. This object is probably best represented as sequence of TripItads. For SMI compatibility, though, it is represented as an OCTET STRING. This object is a sequence of ITADs where each set of 4 octets corresponds to a TRIP ITAD in network byte order." REFERENCE "RFC 3219, section 4.3.4.4" ::= { tripRouteEntry 14 } tripRouteRoutedPath OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4..252)) MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the ITADs through which messages sent using this route would pass. These are a subset of tripRouteAdvertisementPath. This object is probably best represented as sequence of TripItads. For SMI compatibility, though, it is represented as OCTET STRING. This object is a sequence of ITADs where each set of 4 octets corresponds to a TRIP ITAD in network byte order." REFERENCE "RFC 3219, section 4.3.4.5" ::= { tripRouteEntry 15 } tripRouteAtomicAggregate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that a route MAY traverse domains not listed in tripRouteRoutedPath. If an LS selects the less specific route from a set of overlapping routes, then this value returns TRUE." REFERENCE "RFC 3219, section 4.3.4.6" ::= { tripRouteEntry 16 } tripRouteUnknown OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains one or more attributes that were not understood, and because they were transitive, were dropped during aggregation. They take the format of a triple <attribute type, attribute length, attribute value>, of variable length. If no attributes were dropped, this returns an OCTET STRING of size 0." REFERENCE "RFC 3219, sections 4.3.1, 4.3.2.3" ::= { tripRouteEntry 17 } tripRouteWithdrawn OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if this route is to be removed from service by the receiving LS." ::= { tripRouteEntry 18 } tripRouteConverted OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if this route has been converted to a different application protocol than it had originally." ::= { tripRouteEntry 19 } tripRouteReceivedTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this route was received." ::= { tripRouteEntry 20 } -- -- TRIP Received Route Community Table. -- tripRouteCommunityTable OBJECT-TYPE SYNTAX SEQUENCE OF TripRouteCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing a list of TRIP communities associated with a route. Each instance of tripRouteTypeEntry that has the tripRouteTypePeer object set to remote(2) has an instance in the tripRouteTable as a parent. The objects in this table are volatile and are refreshed after a reboot." REFERENCE "RFC 3219, section 5.9." ::= { tripMIBObjects 7 } tripRouteCommunityEntry OBJECT-TYPE SYNTAX TripRouteCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about communities associated with a route. An entry with a tripRouteAddress of 00 and a tripRoutePeer of 0 refers to the local LS." INDEX { applIndex, tripRouteAppProtocol, tripRouteAddressFamily, tripRouteAddress, tripRoutePeer, tripRouteCommunityId } ::= { tripRouteCommunityTable 1 } TripRouteCommunityEntry ::= SEQUENCE { tripRouteCommunityId TripCommunityId, tripRouteCommunityItad TripItad } tripRouteCommunityId OBJECT-TYPE SYNTAX TripCommunityId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The community identifier." ::= { tripRouteCommunityEntry 1 } tripRouteCommunityItad OBJECT-TYPE SYNTAX TripItad MAX-ACCESS read-only STATUS current DESCRIPTION "The ITAD associated with this community." ::= { tripRouteCommunityEntry 2 } -- -- tripItadTopologyTable -- tripItadTopologyTable OBJECT-TYPE SYNTAX SEQUENCE OF TripItadTopologyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of link connections between peers within an ITAD. The objects in this table are volatile and are refreshed after a reboot." ::= { tripMIBObjects 8 } tripItadTopologyEntry OBJECT-TYPE SYNTAX TripItadTopologyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a peer of the LS identified by tripItadTopologyOrigId." INDEX { applIndex, tripItadTopologyOrigId } ::= { tripItadTopologyTable 1 } TripItadTopologyEntry ::= SEQUENCE { tripItadTopologyOrigId TripId, tripItadTopologySeqNum Unsigned32 } tripItadTopologyOrigId OBJECT-TYPE SYNTAX TripId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the internal LS that originated the ITAD topology information into the ITAD." ::= { tripItadTopologyEntry 1 } tripItadTopologySeqNum OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the version of the ITAD topology originated by the LS identified by tripItadTopologyOrigId." ::= { tripItadTopologyEntry 2 } -- -- tripItadTopologyIdTable -- tripItadTopologyIdTable OBJECT-TYPE SYNTAX SEQUENCE OF TripItadTopologyIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The list of other LS's within the ITAD domain that the LS identified by tripItadTopologyOrigId is currently peering. Each instance of tripItadTopologyIdEntry has an instance in the tripItadTopologyTable as a parent. The objects in this table are volatile and are refreshed after a reboot." ::= { tripMIBObjects 9 } tripItadTopologyIdEntry OBJECT-TYPE SYNTAX TripItadTopologyIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a peer to the LS identified by tripItadTopologyOrigId." INDEX { applIndex, tripItadTopologyOrigId, tripItadTopologyId } ::= { tripItadTopologyIdTable 1 } TripItadTopologyIdEntry ::= SEQUENCE { tripItadTopologyId TripId } tripItadTopologyId OBJECT-TYPE SYNTAX TripId MAX-ACCESS read-only STATUS current DESCRIPTION "The index into this entry. Indicates the other location servers within the ITAD domain that this LS identified by tripItadTopologyOrigId is currently peering." ::= { tripItadTopologyIdEntry 1 } -- -- Notification objects -- tripNotifApplIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object contains the application Index. It is used to bind this notification with a specific instance of TRIP entity." REFERENCE "RFC 2788, section 3." ::= { tripMIBNotifObjects 1 } tripNotifPeerAddrInetType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The type of Inet Address of the tripNotifPeerAddr." REFERENCE "RFC 3291, section 3." ::= { tripMIBNotifObjects 2 } tripNotifPeerAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The IP address of this entry's TRIP peer LS. This object contains the value of tripPeerRemoteAddr. The type of this address is determined by the value of the tripNotifPeerAddrInetType object." REFERENCE "RFC 3291, section 3." ::= { tripMIBNotifObjects 3 } tripNotifPeerErrCode OBJECT-TYPE SYNTAX INTEGER { messageHeader(1), openMessage(2), updateMessage(3), holdTimerExpired(4), finiteStateMachine(5), cease(6), tripNotification(7) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Notification message of TRIP error. The meaning of this value is applicable to the following functions: messageHeader(1) - All errors detected while processing the TRIP message header. openMessage(2) - All errors detected while processing the OPEN message. updateMessage(3) - All errors detected while processing the UPDATE message. holdTimerExpired(4) - A notification generated when the hold timer expires. finiteStateMachine(5) - All errors detected by the TRIP Finite State Machine. cease(6) - Any fatal error condition that the rest of the values do not cover. tripNotification(7) - Any error encountered while sending a notification message." ::= { tripMIBNotifObjects 4 } tripNotifPeerErrSubcode OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The sub error code associated with error code. The meaning of this value is dependent on the value of tripNotifPeerErrCode. Message Header (1) Error Subcodes: 1 - Bad Message Length. 2 - Bad Message Type. OPEN Message (2) Error Subcodes: 1 - Unsupported Version Number. 2 - Bad Peer ITAD. 3 - Bad TRIP Identifier. 4 - Unsupported Optional Parameter. 5 - Unacceptable Hold Time. 6 - Unsupported Capability. 7 - Capability Mismatch. UPDATE Message (3) Error Subcodes: 1 - Malformed Attribute List. 2 - Unrecognized Well-known Attribute. 3 - Missing Well-known Mandatory Attribute. 4 - Attribute Flags Error. 5 - Attribute Length Error. 6 - Invalid Attribute." ::= { tripMIBNotifObjects 5 } -- -- Notifications -- tripConnectionEstablished NOTIFICATION-TYPE OBJECTS { tripNotifApplIndex, tripNotifPeerAddrInetType, tripNotifPeerAddr } STATUS current DESCRIPTION "The TRIP Connection Established event is generated when the TRIP finite state machine enters the ESTABLISHED state." ::= { tripMIBNotifications 1 } tripConnectionDropped NOTIFICATION-TYPE OBJECTS { tripNotifApplIndex, tripNotifPeerAddrInetType, tripNotifPeerAddr } STATUS current DESCRIPTION "The TRIP Connection Dropped event is generated when the TRIP finite state machine leaves the ESTABLISHED state." ::= { tripMIBNotifications 2 } tripFSM NOTIFICATION-TYPE OBJECTS { tripNotifApplIndex, tripNotifPeerAddrInetType, tripNotifPeerAddr, tripNotifPeerErrCode, tripNotifPeerErrSubcode, tripPeerState } STATUS current DESCRIPTION "The trip FSM Event is generated when any error is detected by the TRIP Finite State Machine." ::= { tripMIBNotifications 3 } tripOpenMessageError NOTIFICATION-TYPE OBJECTS { tripNotifApplIndex, tripNotifPeerAddrInetType, tripNotifPeerAddr, tripNotifPeerErrCode, tripNotifPeerErrSubcode, tripPeerState } STATUS current DESCRIPTION "Errors detected while processing the OPEN message." ::= { tripMIBNotifications 4 } tripUpdateMessageError NOTIFICATION-TYPE OBJECTS { tripNotifApplIndex, tripNotifPeerAddrInetType, tripNotifPeerAddr, tripNotifPeerErrCode, tripNotifPeerErrSubcode, tripPeerState } STATUS current DESCRIPTION "Errors detected while processing the UPDATE message." ::= { tripMIBNotifications 5 } tripHoldTimerExpired NOTIFICATION-TYPE OBJECTS { tripNotifApplIndex, tripNotifPeerAddrInetType, tripNotifPeerAddr, tripNotifPeerErrCode, tripNotifPeerErrSubcode, tripPeerState } STATUS current DESCRIPTION "The system does not receive successive messages within the period specified by the negotiated Hold Time." ::= { tripMIBNotifications 6 } tripConnectionCollision NOTIFICATION-TYPE OBJECTS { tripNotifApplIndex } STATUS current DESCRIPTION "A pair of LSs tried to simultaneously to establish a transport connection to each other." ::= { tripMIBNotifications 7 } tripCease NOTIFICATION-TYPE OBJECTS { tripNotifApplIndex, tripNotifPeerAddrInetType, tripNotifPeerAddr, tripNotifPeerErrCode, tripNotifPeerErrSubcode, tripPeerState } STATUS current DESCRIPTION "A TRIP peer MAY choose at any given time to close its TRIP connection by sending this notification message. However, the Cease notification message MUST NOT be used when a fatal error occurs." ::= { tripMIBNotifications 8 } tripNotificationErr NOTIFICATION-TYPE OBJECTS { tripNotifApplIndex } STATUS current DESCRIPTION "Generated if there is an error detected in a TRIP notification message sent with another cause. Note that the TRIP notification referred to in this object is not an SNMP notification, it is a specific message described in the TRIP specification." REFERENCE "RFC 3219, section 6.4." ::= { tripMIBNotifications 9 } -- -- Compliance Statements -- tripMIBFullCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for TRIP entities that implement this MIB module in read-write mode, such that it can be used for both monitoring and configuring the TRIP entity. There is one INDEX object that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there is a compliance requirement, expressed in OBJECT clause form in this description: -- OBJECT tripRouteTypeAddrInetType -- SYNTAX InetAddressType (ipv4(1), ipv6(2), -- ipv4z(3), ipv6z(4)) -- DESCRIPTION -- This MIB requires support for global and -- non-global ipv4 and ipv6 addresses. -- -- OBJECT tripRouteTypeAddr -- SYNTAX InetAddress (SIZE (4 | 8 | 16 | 20)) -- DESCRIPTION -- This MIB requires support for global and -- non-global IPv4 and IPv6 addresses. -- " MODULE -- this module MANDATORY-GROUPS { tripConfigGroup, tripPeerTableConfigGroup, tripRouteGroup, tripItadTopologyGroup, tripPeerTableStatsGroup } GROUP tripNotificationGroup DESCRIPTION "This group is OPTIONAL. A TRIP entity can choose not to send any notifications. If this group is implemented, the tripNotifObjectGroup MUST also be implemented." GROUP tripNotifObjectGroup DESCRIPTION "This group is OPTIONAL. A TRIP entity can choose not to send any notifications. If this group is implemented, the tripNotificationGroup MUST also be implemented." OBJECT tripSupportedCommunityRowStatus SYNTAX RowStatus { active(1) } WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait and notInService is not required." OBJECT tripPeerRowStatus SYNTAX RowStatus { active(1) } WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait and notInService is not required." MODULE NETWORK-SERVICES-MIB MANDATORY-GROUPS { applRFC2788Group } ::= { tripMIBCompliances 1 } tripMIBReadOnlyCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for TRIP entities that implement this MIB module in read only mode. Such TRIP entities can then only be monitored, but not be configured via this MIB module. In read-only mode, the manager will not be able to add, remove or modify rows to any table, however the TRIP application may modify, remove or add rows to a table. There is one INDEX object that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there is a compliance requirement, expressed in OBJECT clause form in this description: -- OBJECT tripRouteTypeAddrInetType -- SYNTAX InetAddressType (ipv4(1), ipv6(2), -- ipv4z(3), ipv6z(4)) -- DESCRIPTION -- This MIB requires support for global and -- non-global ipv4 and ipv6 addresses. -- -- OBJECT tripRouteTypeAddr -- SYNTAX InetAddress (SIZE (4 | 8 | 16 | 20)) -- DESCRIPTION -- This MIB requires support for global and -- non-global IPv4 and IPv6 addresses. -- " MODULE -- this module MANDATORY-GROUPS { tripConfigGroup, tripPeerTableConfigGroup, tripRouteGroup, tripItadTopologyGroup, tripPeerTableStatsGroup } GROUP tripNotificationGroup DESCRIPTION "This group is OPTIONAL. A TRIP entity can choose not to send any notifications. If this group is implemented, the tripNotifObjectGroup MUST also be implemented." GROUP tripNotifObjectGroup DESCRIPTION "This group is OPTIONAL. A TRIP entity can choose not to send any notifications. If this group is implemented, the tripNotificationGroup MUST also be implemented." OBJECT tripCfgItad MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripCfgAdminStatus MIN-ACCESS not-accessible DESCRIPTION "Object is not needed when implemented in read-only mode." OBJECT tripCfgPort MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripCfgMinItadOriginationInterval MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripCfgMinRouteAdvertisementInterval MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripCfgMaxPurgeTime MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripCfgDisableTime MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripCfgStorage MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripSupportedCommunityItad MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripSupportedCommunityStorage MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripSupportedCommunityRowStatus SYNTAX RowStatus { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, and active is the only status that needs to be supported." OBJECT tripPeerAdminStatus MIN-ACCESS not-accessible DESCRIPTION "Object is not needed when implemented in read-only mode." OBJECT tripPeerConnectRetryInterval MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripPeerMaxRetryInterval MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripPeerHoldTimeConfigured MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripPeerKeepAliveConfigured MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripPeerMaxPurgeTime MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripPeerDisableTime MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripPeerStorage MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripPeerRowStatus SYNTAX RowStatus { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, and active is the only status that needs to be supported." MODULE NETWORK-SERVICES-MIB MANDATORY-GROUPS { applRFC2788Group } ::= { tripMIBCompliances 2 } -- -- Object and event conformance groups -- tripConfigGroup OBJECT-GROUP OBJECTS { tripCfgProtocolVersion, tripCfgItad, tripCfgIdentifier, tripCfgOperStatus, tripCfgAdminStatus, tripCfgAddrIAddrType, tripCfgAddr, tripCfgPort, tripCfgMinItadOriginationInterval, tripCfgMinRouteAdvertisementInterval, tripCfgMaxPurgeTime, tripCfgDisableTime, tripCfgSendReceiveMode, tripCfgStorage, tripSupportedCommunityItad, tripSupportedCommunityStorage, tripRouteTypePeer, tripSupportedCommunityRowStatus } STATUS current DESCRIPTION "The global objects for configuring trip." ::= { tripMIBGroups 1 } tripPeerTableConfigGroup OBJECT-GROUP OBJECTS { tripPeerIdentifier, tripPeerState, tripPeerAdminStatus, tripPeerNegotiatedVersion, tripPeerSendReceiveMode, tripPeerRemoteItad, tripPeerConnectRetryInterval, tripPeerMaxRetryInterval, tripPeerHoldTime, tripPeerKeepAlive, tripPeerHoldTimeConfigured, tripPeerKeepAliveConfigured, tripPeerMaxPurgeTime, tripPeerDisableTime, tripPeerLearned, tripPeerStorage, tripPeerRowStatus } STATUS current DESCRIPTION "The global objects for configuring the TRIP peer table." ::= { tripMIBGroups 2 } tripPeerTableStatsGroup OBJECT-GROUP OBJECTS { tripPeerInUpdates, tripPeerOutUpdates, tripPeerInTotalMessages, tripPeerOutTotalMessages, tripPeerFsmEstablishedTransitions, tripPeerFsmEstablishedTime, tripPeerInUpdateElapsedTime, tripPeerStateChangeTime } STATUS current DESCRIPTION "The global statistics the TRIP peer table." ::= { tripMIBGroups 3 } tripRouteGroup OBJECT-GROUP OBJECTS { tripRouteTRIBMask, tripRouteAddressSequenceNumber, tripRouteAddressOriginatorId, tripRouteNextHopServerIAddrType, tripRouteNextHopServer, tripRouteNextHopServerPort, tripRouteNextHopServerItad, tripRouteMultiExitDisc, tripRouteLocalPref, tripRouteAdvertisementPath, tripRouteRoutedPath, tripRouteAtomicAggregate, tripRouteUnknown, tripRouteWithdrawn, tripRouteConverted, tripRouteReceivedTime, tripRouteCommunityItad } STATUS current DESCRIPTION "The global objects for configuring route attribute." ::= { tripMIBGroups 4 } tripItadTopologyGroup OBJECT-GROUP OBJECTS { tripItadTopologySeqNum, tripItadTopologyId } STATUS current DESCRIPTION "The objects that define the TRIP ITAD topology." ::= { tripMIBGroups 5 } tripNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { tripConnectionEstablished, tripConnectionDropped, tripFSM, tripOpenMessageError, tripUpdateMessageError, tripHoldTimerExpired, tripConnectionCollision, tripCease, tripNotificationErr } STATUS current DESCRIPTION "A collection of notifications defined for TRIP." ::= { tripMIBGroups 6 } tripNotifObjectGroup OBJECT-GROUP OBJECTS { tripNotifApplIndex, tripNotifPeerAddrInetType, tripNotifPeerAddr, tripNotifPeerErrCode, tripNotifPeerErrSubcode } STATUS current DESCRIPTION "The collection of objects that specify information for TRIP notifications." ::= { tripMIBGroups 7 } END