TN3270E-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, TimeTicks, IpAddress, Counter32, Gauge32, Counter64 FROM SNMPv2-SMI TEXTUAL-CONVENTION, RowStatus, TestAndIncr, DateAndTime, TimeStamp FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF snanauMIB FROM SNA-NAU-MIB Utf8String FROM SYSAPPL-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB IANATn3270eAddrType, IANATn3270eAddress, IANATn3270eClientType, IANATn3270Functions, IANATn3270ResourceType, IANATn3270DeviceType, IANATn3270eLogData FROM IANATn3270eTC-MIB; tn3270eMIB MODULE-IDENTITY LAST-UPDATED "9807270000Z" -- July 27, 1998 ORGANIZATION "TN3270E Working Group" CONTACT-INFO "Kenneth White (kennethw@vnet.ibm.com) IBM Corp. - Dept. BRQA/Bldg. 501/G114 P.O. Box 12195 3039 Cornwallis RTP, NC 27709-2195 USA Robert Moore (remoore@us.ibm.com) IBM Corp. - Dept. BRQA/Bldg. 501/G114 P.O. Box 12195 3039 Cornwallis RTP, NC 27709-2195 USA +1-919-254-4436" DESCRIPTION "This module defines a portion of the management information base (MIB) for managing TN3270E servers." REVISION "9807270000Z" -- July 27, 1998 DESCRIPTION "RFC nnnn (Proposed Standard)" -- RFC Editor to fill in ::= { snanauMIB 8 } -- Textual Conventions SnaResourceName ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The textual convention for defining an SNA resource name. A fully qualified SNA resource name, consisting of a 1 to 8 character network identifier (NetId), a period ('.'), and a 1 to 8 character resource name (ResName). The NetId and ResName are constructed from the uppercase letters 'A' - 'Z' and the numerics '0' - '9', all encoded in ASCII, with the restriction that the first character of each must be a letter. Blanks are not allowed. Earlier versions of SNA permitted three additional characters in NetIds and ResNames: '#', '@', and '$'. While this use of these characters has been retired, a Management Station should still accept them for backward compatibility. Note: This Textual Convention is not subject to internationalization, and does not use the character encodings used by the Utf8String Textual Convention." SYNTAX OCTET STRING (SIZE(0..17)) Tn3270eTraceData ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An octet string representing trace data from the Telnet half of a TN3270E session, from the SNA half, or from both. The octet string contains a sequence of trace elements, with the trace elements in the string ordered from earliest to latest. Each trace element has the following form: +---+---+----+----------------------+ !length !type!data ! +---+---+----+----------------------+ where: length = two-octet length of the data portion of the trace element, not including the length and type octets type = one-octet code point characterizing the data; defined values are: X'01' telnet PDU from the server to the client X'02' telnet PDU from the client to the server X'03' SNA data from the server to the SNA host X'04' SNA data from the SNA host to the server data = initial part of a PDU. It is implementation-dependent where the 'initial part of a PDU' starts. For SNA data, however, the starting point SHOULD be the first byte of the TH. For IP data the starting point SHOULD be the first byte of the IP header. It is left to implementations to determine how much of each PDU to return in a trace element. The zero-length string indicates that no trace data is available." SYNTAX OCTET STRING (SIZE (0 | 3..4096)) -- Top-level structure of the MIB tn3270eNotifications OBJECT IDENTIFIER ::= { tn3270eMIB 0 } tn3270eObjects OBJECT IDENTIFIER ::= { tn3270eMIB 1 } tn3270eConformance OBJECT IDENTIFIER ::= { tn3270eMIB 3 } -- MIB Objects tn3270eSrvrConfTable OBJECT-TYPE SYNTAX SEQUENCE OF Tn3270eSrvrConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines the configuration elements for TN3270E servers. The number of entries in this table is expected to vary depending on the location of the table. A particular TN3270E server is expected to have a single entry. Modeling of the configuration elements as a table allows multiple TN3270E servers to be serviced by the same SNMP agent. An implementation SHOULD NOT retain an SNMP-created entry in this table across re-IPLs (Initial Program Loads) of the corresponding TN3270E server." ::= { tn3270eObjects 1 } tn3270eSrvrConfEntry OBJECT-TYPE SYNTAX Tn3270eSrvrConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Definition of the configuration elements for a single TN3270E server." INDEX { tn3270eSrvrConfIndex } ::= { tn3270eSrvrConfTable 1 } Tn3270eSrvrConfEntry ::= SEQUENCE { tn3270eSrvrConfIndex Unsigned32, tn3270eSrvrConfInactivityTimeout Unsigned32, tn3270eSrvrConfConnectivityChk INTEGER, tn3270eSrvrConfTmNopInactTime Unsigned32, tn3270eSrvrConfTmNopInterval Unsigned32, tn3270eSrvrFunctionsSupported IANATn3270Functions, tn3270eSrvrConfAdminStatus INTEGER, tn3270eSrvrConfOperStatus INTEGER, tn3270eSrvrConfSessionTermState INTEGER, tn3270eSrvrConfSrvrType INTEGER, tn3270eSrvrConfContact SnmpAdminString, tn3270eSrvrConfRowStatus RowStatus, tn3270eSrvrConfLastActTime DateAndTime, tn3270eSrvrConfTmTimeout Unsigned32 } tn3270eSrvrConfIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifier for a single TN3270E server. tn3270eSrvrConfIndex values need not be contiguous." ::= { tn3270eSrvrConfEntry 1 } tn3270eSrvrConfInactivityTimeout OBJECT-TYPE SYNTAX Unsigned32 (0..99999999) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The inactivity time-out specified in seconds. When a connection has been inactive for the number of seconds specified by this object it is closed. Only user traffic is considered when determining whether there has been activity on a connection. The default value 0 means that no inactivity time-out is in effect." DEFVAL { 0 } ::= { tn3270eSrvrConfEntry 2 } tn3270eSrvrConfConnectivityChk OBJECT-TYPE SYNTAX INTEGER { timingMark(1), nop(2), noCheck(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object enables TIMING-MARK processing, NOP processing, or neither for a TN3270E server." DEFVAL { noCheck } ::= { tn3270eSrvrConfEntry 3 } tn3270eSrvrConfTmNopInactTime OBJECT-TYPE SYNTAX Unsigned32 (1..86400) -- 1 second to 24 hours UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The amount of time a connection must have had no traffic on it in order for a TIMING-MARK or NOP request to be sent on the connection. This value applies only when connections are being examined for recent activity on a scan interval controlled by the value of the tn3270eSrvrConfTmNopInterval object." DEFVAL { 600 } -- 10 minutes ::= { tn3270eSrvrConfEntry 4 } tn3270eSrvrConfTmNopInterval OBJECT-TYPE SYNTAX Unsigned32 (1..86400) -- 1 second to 24 hours UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The scan interval to be used by a TN3270E server when it examines its Telnet connections for recent activity. The server scans its Telnet connections on the interval provided by this object, looking for ones that have been idle for more than the value provided by the tn3270eSrvrConfTmNopInactTime object. A TIMING-MARK or NOP request is sent for each connection that has exhibited no activity for this period of time." DEFVAL { 120 } -- 2 minutes ::= { tn3270eSrvrConfEntry 5 } tn3270eSrvrFunctionsSupported OBJECT-TYPE SYNTAX IANATn3270Functions MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the functions supported by a TN3270E server." DEFVAL { { scsCtlCodes, dataStreamCtl, responses, bindImage, sysreq } } ::= { tn3270eSrvrConfEntry 6 } tn3270eSrvrConfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), stopImmediate(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The desired state of the TN3270E server represented by this entry in the table: up(1) - Activate this TN3270E server. down(2) - Informs the associated TN3270E server to gracefully terminate its processing. stopImmediate(3) - Informs the associated TN3270E server to terminate itself immediately. When a managed system creates an entry in this table, tn3270eSrvrConfAdminStatus and tn3270eSrvrConfOperStatus are initialized as up(1) by default. The exact behavior of a server in response to a down(2) or stopImmediate(3) command is left implementation- dependent. A TN3270E server that is capable of it SHOULD close all of its TN3270 and TN3270E sessions during a graceful termination. Often the function enabled via stopImmediate(3) is used as a last resort by a system administrator, to attempt to either bring down a hung TN3270E server or free up its resources immediately to aid in general system availability, or to shut down a TN3270E server that is not recognizing a down(2) request. A TN3270E server that does not distinguish between down(2) or stopImmediate(3) transitions should not support stopImmediate(3)." DEFVAL { up } ::= { tn3270eSrvrConfEntry 7 } tn3270eSrvrConfOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), busy(3), shuttingDown(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of a TN3270E server. The following values are defined: up(1) - the server is active and accepting new client connections down(2) - the server is not active busy(3) - the server is active, but is not accepting new client connections because it lacks the resources to do so shuttingDown(4) - the server is active, but is not accepting new client connections because it is in the process of performing a graceful shutdown." DEFVAL { up } ::= { tn3270eSrvrConfEntry 8 } tn3270eSrvrConfSessionTermState OBJECT-TYPE SYNTAX INTEGER { terminate(1), luSessionPend(2), queueSession(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object determines what a TN3270E server should do when a TN3270 Session terminates: terminate(1) => Terminate the TCP connection. luSessionPend(2) => Do not drop the TCP connection associated with a client when its TN3270 session ends. Processing should redrive session initialization as if the client were first connecting. queueSession(3) => This value relates to the Close Destination PASS (CLSDST PASS) operation in VTAM. An example provides the easiest explanation. Suppose a TN3270E client is in session with APPL1, and APPL1 does a CLSDST PASS of the client's session to APPL2. queueSession(3) specifies that the TN3270E server must keep the TCP connection with the client active after it receives the UNBIND from APPL1, waiting for the BIND from APPL2." DEFVAL { terminate } ::= { tn3270eSrvrConfEntry 9 } tn3270eSrvrConfSrvrType OBJECT-TYPE SYNTAX INTEGER { host(1), gateway(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the type of TN3270E server. The existence of MIB tables and objects that will be defined by follow-on MIBs may be predicated on whether the TN3270E server can be local to the same host as a target application (host(1)) or will always be remote (gateway(2)). A host TN3270E server refers to an implementation where the TN3270E server is collocated with the Systems Network Architecture (SNA) System Services Control Point (SSCP) for the dependent Secondary Logical Units (SLUs) that the server makes available to its clients for connecting into an SNA network. A gateway TN3270E server resides on an SNA node other than an SSCP, either an SNA type 2.0 node or an APPN node acting in the role of a Dependent LU Requester (DLUR). Host and gateway TN3270E server implementations typically differ greatly as to their internal implementation and system definition (SYSDEF) requirements." ::= { tn3270eSrvrConfEntry 10 } tn3270eSrvrConfContact OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "This object provides a scratch pad for a TN3270E server administrator for storing information for later retrieval." DEFVAL { ''H } -- the empty string ::= { tn3270eSrvrConfEntry 11 } tn3270eSrvrConfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows entries to be created and deleted in the tn3270eSrvrConfTable. Entries may also be created and deleted as a result of implementation- dependent operations. With the exception of tn3270eSrvrConfSrvrType, which an implementation can easily fill in for itself, all the columnar objects in this table have DEFVALs associated with them. Consequently, a Management Station can create a conceptual row via a SET operation that specifies a value only for this object. When a tn3270eSrvrConfEntry is deleted (by setting this object to destroy(6)), this has the side-effect of removing all the associated entries (i.e., those having the same tn3270eSrvrConfIndex) from the tn3270eSrvrPortTable, the tn3270eSrvrStatsTable, the tn3270eClientGroupTable, the tn3270eResPoolTable, the tn3270eSnaMapTable, the tn3270eClientResMapTable, and the tn3270eResMapTable. All entries in the tn3270eTcpConnTable that belong to a TN3270E server that has been deleted MUST also be removed. In other words, a tn3270eSrvrConfEntry must exist for a TN3270E server in order for it to have entries in any of the other tables defined by this MIB." REFERENCE "RFC 1903, 'Textual Conventions for version 2 of the Simple Network Management Protocol (SNMPv2).'" ::= { tn3270eSrvrConfEntry 12 } tn3270eSrvrConfLastActTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object reports the DateAndTime when a TN3270E server was most recently activated. The special value of all '00'Hs indicates that the server has never been active, i.e., that the value of tn3270eSrvrOperStatus has never been anything other than down(2)." DEFVAL { '0000000000000000'H } ::= { tn3270eSrvrConfEntry 13 } tn3270eSrvrConfTmTimeout OBJECT-TYPE SYNTAX Unsigned32 (1..600) -- 1 second to 10 minutes UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The TIMING-MARK time-out, specified in seconds." DEFVAL { 5 } -- 5 seconds ::= { tn3270eSrvrConfEntry 14 } tn3270eSrvrPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Tn3270eSrvrPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines the TCP ports associated with TN3270E servers. No entry in this table shall exist without a corresponding (same tn3270eSrvrConfIndex) entry in the tn3270eSrvrConfTable existing. An implementation SHOULD NOT retain SNMP-created entries in this table across re-IPLs (Initial Program Loads) of the corresponding TN3270E server." ::= { tn3270eObjects 2 } tn3270eSrvrPortEntry OBJECT-TYPE SYNTAX Tn3270eSrvrPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Definition of a single TCP port assignment to a TN3270E server. Assignment of a port on a local address basis is enabled though use of tn3270eSrvrPortAddrType and tn3270eSrvrPortAddress. A TCP port assignment that is not restricted to a local address SHALL specify a tn3270eSrvrPortAddrType of unknown(0), and SHALL use a zero-length octet string for the tn3270eSrvrPortAddress." INDEX { tn3270eSrvrConfIndex, tn3270eSrvrPort, tn3270eSrvrPortAddrType, tn3270eSrvrPortAddress } ::= { tn3270eSrvrPortTable 1 } Tn3270eSrvrPortEntry ::= SEQUENCE { tn3270eSrvrPort Unsigned32, tn3270eSrvrPortAddrType IANATn3270eAddrType, tn3270eSrvrPortAddress IANATn3270eAddress, tn3270eSrvrPortRowStatus RowStatus } tn3270eSrvrPort OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates a port assigned to a server." ::= { tn3270eSrvrPortEntry 1 } tn3270eSrvrPortAddrType OBJECT-TYPE SYNTAX IANATn3270eAddrType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the type of an address local to the host on which the TN3270E server resides that is represented in tn3270eSrvrPortAddress. A value of unknown(0) SHALL be used for this object when the port is not to be restricted to a local address." ::= { tn3270eSrvrPortEntry 2 } tn3270eSrvrPortAddress OBJECT-TYPE SYNTAX IANATn3270eAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "A local address on the host that a TN3270E server resides on that is associated with a TCP port that is to be used or is in use by a TN3270E server. tn3270eClientGroupAddrType indicates the address type (IPv4 or IPv6, for example). A zero-length octet string SHALL be used as the value of this object when a local address isn't being specified." ::= { tn3270eSrvrPortEntry 3 } tn3270eSrvrPortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows entries to be created and deleted in the tn3270eSrvrPortTable. Entries may also be created and deleted as a result of implementation- dependent operations. Since this is the only accessible object in this table, a Management Station can create a conceptual row via a SET operation that specifies a value only for this object. An entry in this table is deleted by setting this object to destroy(6). Deletion of a tn3270eSrvrPortEntry has no effect on any other table entry defined by this MIB." REFERENCE "RFC 1903, 'Textual Conventions for version 2 of the Simple Network Management Protocol (SNMPv2).'" ::= { tn3270eSrvrPortEntry 4 } tn3270eSrvrStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF Tn3270eSrvrStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines a set of statistics concerning TN3270E server performance. No entry in this table shall exist without a corresponding (same tn3270eSrvrConfIndex) entry in the tn3270eSrvrConfTable existing." ::= { tn3270eObjects 3 } tn3270eSrvrStatsEntry OBJECT-TYPE SYNTAX Tn3270eSrvrStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of statistical and maximum usage objects for a single TN3270 server. An entry can represent the total activity of the server, or it can represent the activity occurring at the server on either a port or a port-and-local-address basis. Collection of the statistics represented by the objects in this table is not mandatory. An implementation of this table MUST use only one of the three levels of refinement that this table supports for the entries associated with each TN3270E server. The indexing for a row that represents total server statistics is as follows: tn3270eSrvrConfIndex value identifying the server tn3270eSrvrPort 0 tn3270eSrvrPortAddrType unknown(0) tn3270eSrvrPortAddress zero-length octet string. On a port basis: tn3270eSrvrConfIndex value identifying the server tn3270eSrvrPort > 0 tn3270eSrvrPortAddrType unknown(0) tn3270eSrvrPortAddress zero-length octet string. On a port-and-local-address basis: tn3270eSrvrConfIndex value identifying the server tn3270eSrvrPort > 0 tn3270eSrvrPortAddrType valid value other than unknown(0) tn3270eSrvrPortAddress non-zero-length octet string. " INDEX { tn3270eSrvrConfIndex, tn3270eSrvrPort, tn3270eSrvrPortAddrType, tn3270eSrvrPortAddress } ::= { tn3270eSrvrStatsTable 1 } Tn3270eSrvrStatsEntry ::= SEQUENCE { tn3270eSrvrStatsUpTime TimeStamp, tn3270eSrvrStatsMaxTerms Unsigned32, tn3270eSrvrStatsInUseTerms Gauge32, tn3270eSrvrStatsSpareTerms Gauge32, tn3270eSrvrStatsMaxPtrs Unsigned32, tn3270eSrvrStatsInUsePtrs Gauge32, tn3270eSrvrStatsSparePtrs Gauge32, tn3270eSrvrStatsInConnects Counter32, tn3270eSrvrStatsConnResrceRejs Counter32, tn3270eSrvrStatsDisconnects Counter32, tn3270eSrvrStatsHCInOctets Counter64, tn3270eSrvrStatsInOctets Counter32, tn3270eSrvrStatsHCOutOctets Counter64, tn3270eSrvrStatsOutOctets Counter32, tn3270eSrvrStatsConnErrorRejs Counter32 } tn3270eSrvrStatsUpTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the sysUpTime object the last time the TN3270E server was re-initialized. Server re-initialization is the only discontinuity event for the counters in this table. Even if table entries are on a port or port-and-local-address basis, port deactivation and reactivation do not result in counter discontinuities." ::= { tn3270eSrvrStatsEntry 2 } tn3270eSrvrStatsMaxTerms OBJECT-TYPE SYNTAX Unsigned32 UNITS "LUs" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum number of terminal LUs available for use at a TN3270E server for the granularity of this conceptual row (server-wide, port, or port-and-local-address)." ::= { tn3270eSrvrStatsEntry 3 } tn3270eSrvrStatsInUseTerms OBJECT-TYPE SYNTAX Gauge32 UNITS "LUs" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of terminal LUs currently in use at a TN3270E server for the granularity of this conceptual row (server-wide, port, or port-and-local-address)." ::= { tn3270eSrvrStatsEntry 4 } tn3270eSrvrStatsSpareTerms OBJECT-TYPE SYNTAX Gauge32 UNITS "LUs" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of free terminal LUs at a TN3270E server for the granularity of this conceptual row (server-wide, port, or port-and-local-address). It is possible that the difference between tn3270eSrvrStatsMaxTerms and tn3270eSrvrStatsInUseTerms in a conceptual row does not equal the value of tn3270eSrvrStatsSpareTerms in that row: an LU may exist but not be usable by a client connection. Alternatively, the administrative ceiling represented by tn3270eSrvrStatsMaxTerms may have been lowered to a point where it is less than the current value of tn3270eSrvrStatsInUseTerms. In this case tn3270eSrvrStatsSpareTerms returns the value 0." ::= { tn3270eSrvrStatsEntry 5 } tn3270eSrvrStatsMaxPtrs OBJECT-TYPE SYNTAX Unsigned32 UNITS "Printer Resources" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum number of printer resources available for use by a TN3270E server for the granularity of this conceptual row (server-wide, port, or port-and-local-address)." ::= { tn3270eSrvrStatsEntry 6 } tn3270eSrvrStatsInUsePtrs OBJECT-TYPE SYNTAX Gauge32 UNITS "Printer Resources" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of printer resources currently in use by a TN3270E server for the granularity of this conceptual row (server-wide, port, or port-and-local-address)." ::= { tn3270eSrvrStatsEntry 7 } tn3270eSrvrStatsSparePtrs OBJECT-TYPE SYNTAX Gauge32 UNITS "Spare Printer Resources" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of free printer resources at a TN3270E server for the granularity of this conceptual row (server-wide, port, or port-and-local-address). It is possible that the difference between tn3270eSrvrStatsMaxPtrs and tn3270eSrvrStatsInUsePtrs in a conceptual row does not equal the value of tn3270eSrvrStatsSparePtrs in that row: a printer resource may exist but not be usable by a client connection. Alternatively, the administrative ceiling represented by tn3270eSrvrStatsMaxPtrs may have been lowered to a point where it is less than the current value of tn3270eSrvrStatsInUsePtrs. In this case tn3270eSrvrStatsSparePtrs returns the value 0." ::= { tn3270eSrvrStatsEntry 8 } tn3270eSrvrStatsInConnects OBJECT-TYPE SYNTAX Counter32 UNITS "connections" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of client (TCP) connections that succeeded at a TN3270E server for the granularity of this conceptual row (server-wide, port, or port-and-local-address). The tn3270eSrvrStatsConnResrceRejs and tn3270eSrvrStatsConnErrorRejs objects provide a count of failed connection attempts. A Management Station can detect discontinuities in this counter by monitoring the tn3270eSrvrStatsUpTime object." ::= { tn3270eSrvrStatsEntry 9 } tn3270eSrvrStatsConnResrceRejs OBJECT-TYPE SYNTAX Counter32 UNITS "connection attempts" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of (TCP) connections rejected during connection setup at a TN3270E server for the granularity of this conceptual row (server-wide, port, or port-and-local-address) due to a lack of resources at the server. An example of when this counter would be incremented is when no terminal or printer resource is available to associate with a client's TCP connection. A Management Station can detect discontinuities in this counter by monitoring the tn3270eSrvrStatsUpTime object." ::= { tn3270eSrvrStatsEntry 10 } tn3270eSrvrStatsDisconnects OBJECT-TYPE SYNTAX Counter32 UNITS "disconnections" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of (TCP) connections that were disconnected at a TN3270E server for the granularity of this conceptual row (server-wide, port, or port-and-local-address). A Management Station can detect discontinuities in this counter by monitoring the tn3270eSrvrStatsUpTime object." ::= { tn3270eSrvrStatsEntry 11 } tn3270eSrvrStatsHCInOctets OBJECT-TYPE SYNTAX Counter64 UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of octets received from TN3270 and TN3270E clients for the granularity of this conceptual row (server-wide, port, or port-and-local-address). A Management Station can detect discontinuities in this counter by monitoring the tn3270eSrvrStatsUpTime object." ::= { tn3270eSrvrStatsEntry 12 } tn3270eSrvrStatsInOctets OBJECT-TYPE SYNTAX Counter32 UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "Low-order 32 bits of tn3270eSrvrStatsHCInOctets for this conceptual row. A Management Station can detect discontinuities in this counter by monitoring the tn3270eSrvrStatsUpTime object." ::= { tn3270eSrvrStatsEntry 13 } tn3270eSrvrStatsHCOutOctets OBJECT-TYPE SYNTAX Counter64 UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of octets sent to TN3270 and TN3270E clients for the granularity of this conceptual row (server-wide, port, or port-and-local-address). A Management Station can detect discontinuities in this counter by monitoring the tn3270eSrvrStatsUpTime object." ::= { tn3270eSrvrStatsEntry 14 } tn3270eSrvrStatsOutOctets OBJECT-TYPE SYNTAX Counter32 UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "Low-order 32 bits of tn3270eSrvrStatsHCOutOctets for this conceptual row. A Management Station can detect discontinuities in this counter by monitoring the tn3270eSrvrStatsUpTime object." ::= { tn3270eSrvrStatsEntry 15 } tn3270eSrvrStatsConnErrorRejs OBJECT-TYPE SYNTAX Counter32 UNITS "connection attempts" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of (TCP) connections rejected during connection setup at a TN3270E server for the granularity of this conceptual row (server-wide, port, or port-and-local-address) due to an error of some type. An example of when this counter would be incremented is when the client and the server cannot agree on a common set of TN3270E functions for the connection. A Management Station can detect discontinuities in this counter by monitoring the tn3270eSrvrStatsUpTime object." ::= { tn3270eSrvrStatsEntry 16 } tn3270eClientGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF Tn3270eClientGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines client address groupings for use by a TN3270E server. No entry in this table shall exist without a corresponding (same tn3270eSrvrConfIndex) entry in the tn3270eSrvrConfTable existing. An implementation SHOULD NOT retain SNMP-created entries in this table across re-IPLs (Initial Program Loads) of the corresponding TN3270E server." ::= { tn3270eObjects 4 } tn3270eClientGroupEntry OBJECT-TYPE SYNTAX Tn3270eClientGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Definition of a single client address entry. All entries with the same first two indexes, tn3270eSrvrConfIndex and tn3270eClientGroupName, are considered to be in the same client group." INDEX { tn3270eSrvrConfIndex, tn3270eClientGroupName, tn3270eClientGroupAddrType, tn3270eClientGroupAddress } ::= { tn3270eClientGroupTable 1 } Tn3270eClientGroupEntry ::= SEQUENCE { tn3270eClientGroupName Utf8String, tn3270eClientGroupAddrType IANATn3270eAddrType, tn3270eClientGroupAddress IANATn3270eAddress, tn3270eClientGroupSubnetMask IpAddress, tn3270eClientGroupPfxLength Unsigned32, tn3270eClientGroupRowStatus RowStatus } tn3270eClientGroupName OBJECT-TYPE SYNTAX Utf8String (SIZE(1..24)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of a client group. Note: client group names are required to be unique only with respect to a single TN3270E server." ::= { tn3270eClientGroupEntry 1 } tn3270eClientGroupAddrType OBJECT-TYPE SYNTAX IANATn3270eAddrType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the type of the address represented in tn3270eClientGroupAddress." ::= { tn3270eClientGroupEntry 2 } tn3270eClientGroupAddress OBJECT-TYPE SYNTAX IANATn3270eAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The client address of a member of a client group. The value of tn3270eClientGroupAddrType indicates the address type (IPv4 or IPv6, for example)." ::= { tn3270eClientGroupEntry 3 } tn3270eClientGroupSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The corresponding subnet mask associated with tn3270eClientGroupAddress. A single IP address is represented by having this object contain the value of 255.255.255.255. This object's value is meaningful only if tn3270eClientGroupAddrType has a value of ipv4(1)." DEFVAL { 'FFFFFFFF'H } ::= { tn3270eClientGroupEntry 4 } tn3270eClientGroupPfxLength OBJECT-TYPE SYNTAX Unsigned32 (0..128) UNITS "bits" MAX-ACCESS read-create STATUS current DESCRIPTION "The corresponding IPv6 network prefix length. This object's value is meaningful only if tn3270eClientGroupAddrType has a value of ipv6(2)." DEFVAL { 0 } ::= { tn3270eClientGroupEntry 5 } tn3270eClientGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows entries to be created and deleted in the tn3270eClientGroupTable. Entries may also be created and deleted as a result of implementation- dependent operations. An entry in this table is deleted by setting this object to destroy(6). When the number of entries in this table for a given client group becomes 0, this has the side- effect of removing any entries for the group in the tn3270eClientResMapTable." REFERENCE "RFC 1903, 'Textual Conventions for version 2 of the Simple Network Management Protocol (SNMPv2).'" ::= { tn3270eClientGroupEntry 6 } tn3270eResPoolTable OBJECT-TYPE SYNTAX SEQUENCE OF Tn3270eResPoolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines resource groupings; the term 'pool' is used as it is defined by RFC 2355. No entry in this table shall exist without a corresponding (same tn3270eSrvrConfIndex) entry in the tn3270eSrvrConfTable existing. An implementation SHOULD NOT retain SNMP-created entries in this table across re-IPLs (Initial Program Loads) of the corresponding TN3270E server." ::= { tn3270eObjects 5 } tn3270eResPoolEntry OBJECT-TYPE SYNTAX Tn3270eResPoolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Definition of a single resource pool member. All entries with the same first two indexes, tn3270eSrvrConfIndex and tn3270eResPoolName, are considered to be in the same pool." INDEX { tn3270eSrvrConfIndex, tn3270eResPoolName, tn3270eResPoolElementName } ::= { tn3270eResPoolTable 1 } Tn3270eResPoolEntry ::= SEQUENCE { tn3270eResPoolName Utf8String, tn3270eResPoolElementName SnaResourceName, tn3270eResPoolElementType IANATn3270ResourceType, tn3270eResPoolRowStatus RowStatus } tn3270eResPoolName OBJECT-TYPE SYNTAX Utf8String (SIZE(1..24)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of a resource pool." ::= { tn3270eResPoolEntry 1 } tn3270eResPoolElementName OBJECT-TYPE SYNTAX SnaResourceName MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of a member of a resource pool." ::= { tn3270eResPoolEntry 2 } tn3270eResPoolElementType OBJECT-TYPE SYNTAX IANATn3270ResourceType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of the entity in a resource pool." ::= { tn3270eResPoolEntry 3 } tn3270eResPoolRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows entries to be created and deleted in the tn3270eResPoolTable. Entries may also be created and deleted as a result of implementation- dependent operations. An entry in this table is deleted by setting this object to destroy(6). When all entries in this table associated with the same tn3270eResPoolElementName have been removed, then any associated (tn3270eResPoolElementName matching tn3270eClientResMapPoolName with same tn3270eSrvrConfIndex values) entries in the tn3270eClientResMapTable SHALL also be removed." REFERENCE "RFC 1903, 'Textual Conventions for version 2 of the Simple Network Management Protocol (SNMPv2).'" ::= { tn3270eResPoolEntry 4 } tn3270eSnaMapTable OBJECT-TYPE SYNTAX SEQUENCE OF Tn3270eSnaMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provide a mapping from the name by which a secondary LU is known in the SNA network to the name by which it is known locally at the TN3270e server. This latter name serves as an index into the tn3270eResPoolTable and the tn3270eResMapTable. No entry in this table shall exist without a corresponding (same tn3270eSrvrConfIndex) entry in the tn3270eSrvrConfTable existing." ::= { tn3270eObjects 6 } tn3270eSnaMapEntry OBJECT-TYPE SYNTAX Tn3270eSnaMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Definition of a single mapping from an SSCP-supplied SLU name to a local SLU name. Note: In certain pathological cases, it is possible that an SSCP will send on an ACTLU for a local LU an SLU name currently represented by an entry in this table that associates it with a different local LU. In these cases the association from the newer ACTLU SHOULD be the one represented in this table." INDEX { tn3270eSrvrConfIndex, tn3270eSnaMapSscpSuppliedName } ::= { tn3270eSnaMapTable 1 } Tn3270eSnaMapEntry ::= SEQUENCE { tn3270eSnaMapSscpSuppliedName SnaResourceName, tn3270eSnaMapLocalName SnaResourceName, tn3270eSnaMapPrimaryLuName SnaResourceName } tn3270eSnaMapSscpSuppliedName OBJECT-TYPE SYNTAX SnaResourceName MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the secondary LU (SLU) as it is known in the SNA network. This name is sent by the SSCP on the Activate Logical Unit (ACTLU) request." ::= { tn3270eSnaMapEntry 1 } tn3270eSnaMapLocalName OBJECT-TYPE SYNTAX SnaResourceName MAX-ACCESS read-only STATUS current DESCRIPTION "The local name of the secondary LU (SLU)." ::= { tn3270eSnaMapEntry 2 } tn3270eSnaMapPrimaryLuName OBJECT-TYPE SYNTAX SnaResourceName MAX-ACCESS read-only STATUS current DESCRIPTION "When there is a currently active LU-LU session for this connection, this object returns the primary LU (PLU) name from the BIND. When there is no active LU-LU session, or when the PLU name is unavailable for some other reason, this object returns a zero-length octet string." ::= { tn3270eSnaMapEntry 3 } tn3270eClientResMapTable OBJECT-TYPE SYNTAX SEQUENCE OF Tn3270eClientResMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines resource-pool to client-group mappings. Since both the resource pool name and client group name are included in the index clause of this table, multiple resource pools can be assigned to the same client group. This enables use of multiple resource pools for use in client to resource mapping. Assigning multiple client groups to the same resource pool is also allowed, but is not the primary purpose for how the indexing is structured. Assignment of a resource pool to client group can be restricted based on TCP port. An index value of 0 for tn3270eClientResMapClientPort disables restriction of resource assignment based on client target port selection. No entry in this table shall exist without a corresponding (same tn3270eSrvrConfIndex) entry in the tn3270eSrvrConfTable existing. An implementation SHOULD NOT retain SNMP-created entries in this table across re-IPLs (Initial Program Loads) of the corresponding TN3270E server." ::= { tn3270eObjects 7 } tn3270eClientResMapEntry OBJECT-TYPE SYNTAX Tn3270eClientResMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Definition of a single resource pool to client group mapping." INDEX { tn3270eSrvrConfIndex, tn3270eClientResMapPoolName, tn3270eClientResMapClientGroupName, tn3270eClientResMapClientPort } ::= { tn3270eClientResMapTable 1 } Tn3270eClientResMapEntry ::= SEQUENCE { tn3270eClientResMapPoolName Utf8String, tn3270eClientResMapClientGroupName Utf8String, tn3270eClientResMapClientPort Unsigned32, tn3270eClientResMapRowStatus RowStatus } tn3270eClientResMapPoolName OBJECT-TYPE SYNTAX Utf8String (SIZE(1..24)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of a resource pool." ::= { tn3270eClientResMapEntry 1 } tn3270eClientResMapClientGroupName OBJECT-TYPE SYNTAX Utf8String (SIZE(1..24)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the client group that is mapped to a resource pool." ::= { tn3270eClientResMapEntry 2 } tn3270eClientResMapClientPort OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A port number restricting the scope of a mapping from a resource pool to a client group. The value 0 for this object indicates that the scope of the mapping is not restricted." ::= { tn3270eClientResMapEntry 3 } tn3270eClientResMapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows entries to be created and deleted in the tn3270eClientResMapTable. Entries may also be created and deleted as a result of implementation- dependent operations. An entry in this table is deleted by setting this object to destroy(6). Removing an entry from this table doesn't affect any other table entry defined in this MIB." REFERENCE "RFC 1903, 'Textual Conventions for version 2 of the Simple Network Management Protocol (SNMPv2).'" ::= { tn3270eClientResMapEntry 4 } tn3270eResMapTable OBJECT-TYPE SYNTAX SEQUENCE OF Tn3270eResMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines the actual mapping of a resource to a client address. No entry in this table shall exist without a corresponding (same tn3270eSrvrConfIndex) entry in the tn3270eSrvrConfTable existing." ::= { tn3270eObjects 8 } tn3270eResMapEntry OBJECT-TYPE SYNTAX Tn3270eResMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Definition of the mapping of a Resource Element to a client address." INDEX { tn3270eSrvrConfIndex, tn3270eResMapElementName } ::= { tn3270eResMapTable 1 } Tn3270eResMapEntry ::= SEQUENCE { tn3270eResMapElementName SnaResourceName, tn3270eResMapAddrType IANATn3270eAddrType, tn3270eResMapAddress IANATn3270eAddress, tn3270eResMapPort Unsigned32, tn3270eResMapElementType IANATn3270ResourceType, tn3270eResMapSscpSuppliedName SnaResourceName } tn3270eResMapElementName OBJECT-TYPE SYNTAX SnaResourceName MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of a resource element. This is the name by which the server implementing this table knows the resource. It may be different from the name by which the resource is known in the SNA network. This latter name is returned in the tn3270eResMapSscpSuppliedName object." ::= { tn3270eResMapEntry 1 } tn3270eResMapAddrType OBJECT-TYPE SYNTAX IANATn3270eAddrType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the type of the client address represented in tn3270eResMapAddress." ::= { tn3270eResMapEntry 2 } tn3270eResMapAddress OBJECT-TYPE SYNTAX IANATn3270eAddress MAX-ACCESS read-only STATUS current DESCRIPTION "A client address." ::= { tn3270eResMapEntry 3 } tn3270eResMapPort OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "A client port." ::= { tn3270eResMapEntry 4 } tn3270eResMapElementType OBJECT-TYPE SYNTAX IANATn3270ResourceType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the associated resource element." ::= { tn3270eResMapEntry 5 } tn3270eResMapSscpSuppliedName OBJECT-TYPE SYNTAX SnaResourceName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the secondary LU (SLU) as it is known in a SNA network. This name is sent by the SSCP on the Activate Logical Unit (ACTLU) request. If this name is not known, this object returns a zero-length octet string." ::= { tn3270eResMapEntry 6 } -- Define the set of objects to supplement the TCP Connection Table tn3270eTcpConnTable OBJECT-TYPE SYNTAX SEQUENCE OF Tn3270eTcpConnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table has an entry for each TN3270(E) client connection that is currently active at a TN3270E server. An implementation MAY retain entries for connections that have been terminated, but which entries are retained, how many entries are retained, and how long they are retained is entirely implementation-dependent. The indexing for this table is designed to support the use of an SNMP GET-NEXT operation using only the remote address type, remote address, and remote port, as a way for a Management Station to retrieve the table entries related to a particular TN3270(E) client." ::= { tn3270eObjects 9 } tn3270eTcpConnEntry OBJECT-TYPE SYNTAX Tn3270eTcpConnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provides information about a single TN3270/TN3270E session. Note: a tn3270eSrvrConfIndex is not needed in this table, since the combination of remote and local addresses and ports is sufficient to guarantee uniqueness across the TN3270E servers serviced by an SNMP agent. Because of this indexing structure, however, this table does not support view-based access control policies that provide access to table rows on a per-server basis." INDEX { tn3270eTcpConnRemAddrType, tn3270eTcpConnRemAddress, tn3270eTcpConnRemPort, tn3270eTcpConnLocalAddrType, tn3270eTcpConnLocalAddress, tn3270eTcpConnLocalPort } ::= { tn3270eTcpConnTable 1 } Tn3270eTcpConnEntry ::= SEQUENCE { tn3270eTcpConnRemAddrType IANATn3270eAddrType, tn3270eTcpConnRemAddress IANATn3270eAddress, tn3270eTcpConnRemPort Unsigned32, tn3270eTcpConnLocalAddrType IANATn3270eAddrType, tn3270eTcpConnLocalAddress IANATn3270eAddress, tn3270eTcpConnLocalPort Unsigned32, tn3270eTcpConnLastActivity TimeTicks, tn3270eTcpConnBytesIn Counter32, tn3270eTcpConnBytesOut Counter32, tn3270eTcpConnResourceElement SnaResourceName, tn3270eTcpConnResourceType IANATn3270ResourceType, tn3270eTcpConnDeviceType IANATn3270DeviceType, tn3270eTcpConnFunctions IANATn3270Functions, tn3270eTcpConnId Unsigned32, tn3270eTcpConnClientIdFormat IANATn3270eClientType, tn3270eTcpConnClientId OCTET STRING, tn3270eTcpConnTraceData Tn3270eTraceData, tn3270eTcpConnLogInfo IANATn3270eLogData, tn3270eTcpConnLuLuBindImage OCTET STRING, tn3270eTcpConnSnaState INTEGER, tn3270eTcpConnStateLastDiscReason INTEGER, tn3270eTcpConnSrvrConfIndex Unsigned32, tn3270eTcpConnActivationTime TimeStamp } tn3270eTcpConnRemAddrType OBJECT-TYPE SYNTAX IANATn3270eAddrType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the type of the value of the tn3270eTcpConnRemAddress object. For example, ipv4(1) or ipv6(2)." ::= { tn3270eTcpConnEntry 1 } tn3270eTcpConnRemAddress OBJECT-TYPE SYNTAX IANATn3270eAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The remote address associated with a TN3270E client. tn3270eTcpConnRemAddrType indicates the address type (IPv4 or IPv6, for example). If a TN3270(E) client is connected to its server via a proxy client the address represented by the value of this object shall be the remote client's address, not the proxy client's address." ::= { tn3270eTcpConnEntry 2 } tn3270eTcpConnRemPort OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The remote port associated with a TN3270E client. The value 0 is used if the tn3270eTcpConnRemAddrType identifies an address type that does not support ports. If a TN3270(E) client is connected to its server via a proxy client, the port represented by the value of this object shall be the remote client's port, not the proxy client's port." ::= { tn3270eTcpConnEntry 3 } tn3270eTcpConnLocalAddrType OBJECT-TYPE SYNTAX IANATn3270eAddrType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the type of the value of the tn3270eTcpConnLocalAddress object. For example, ipv4(1) or ipv6(2)." ::= { tn3270eTcpConnEntry 4 } tn3270eTcpConnLocalAddress OBJECT-TYPE SYNTAX IANATn3270eAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The local address associated with a TN3270E client. tn3270eTcpConnRemAddrType indicates the address type (IPv4 or IPv6, for example)." ::= { tn3270eTcpConnEntry 5 } tn3270eTcpConnLocalPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The remote port associated with a TN3270E client." ::= { tn3270eTcpConnEntry 6 } tn3270eTcpConnLastActivity OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The number of 100ths of seconds since any data was transferred for the associated TCP Connection." DEFVAL { 0 } ::= { tn3270eTcpConnEntry 7 } tn3270eTcpConnBytesIn OBJECT-TYPE SYNTAX Counter32 UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes received by the server from TCP for this connection. A Management Station can detect discontinuities in this counter by monitoring the tn3270eTcpConnActivationTime object." ::= { tn3270eTcpConnEntry 8 } tn3270eTcpConnBytesOut OBJECT-TYPE SYNTAX Counter32 UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes sent to TCP for this connection. A Management Station can detect discontinuities in this counter by monitoring the tn3270eTcpConnActivationTime object." ::= { tn3270eTcpConnEntry 9 } tn3270eTcpConnResourceElement OBJECT-TYPE SYNTAX SnaResourceName MAX-ACCESS read-only STATUS current DESCRIPTION "LU/Print secondary name for connecting an client into an SNA network." ::= { tn3270eTcpConnEntry 10 } tn3270eTcpConnResourceType OBJECT-TYPE SYNTAX IANATn3270ResourceType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the type of resource identified by tn3270eTcpConnResourceElement." ::= { tn3270eTcpConnEntry 11 } tn3270eTcpConnDeviceType OBJECT-TYPE SYNTAX IANATn3270DeviceType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the device type if negotiated with the client. A value of unknown(100) should be used as the value of this object when a device type is not negotiated. Refer to RFC 2355 for how device types can be negotiated." ::= { tn3270eTcpConnEntry 12 } tn3270eTcpConnFunctions OBJECT-TYPE SYNTAX IANATn3270Functions MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates which of the TN3270 and TN3270E functions were negotiated by the server and the client for this TCP connection. Refer to tn3270eSrvrFunctionsSupported for the list of these functions supported by the server." ::= { tn3270eTcpConnEntry 13 } tn3270eTcpConnId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The connection identifier associated with a TN3270 or a TN3270E session's TCP connection. TCP implementations often assign a unique (with respect to itself) unsigned integer as an identifier for a TCP connection. The value 0 indicates that a connection does not have a valid connection identifier." ::= { tn3270eTcpConnEntry 14 } tn3270eTcpConnClientIdFormat OBJECT-TYPE SYNTAX IANATn3270eClientType MAX-ACCESS read-only STATUS current DESCRIPTION "The format of a corresponding tn3270eTcpConnClientId object as defined by the IANSTn3270eClientType textual convention imported from the IANATn3270eTC-MIB." ::= { tn3270eTcpConnEntry 15 } tn3270eTcpConnClientId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..512)) MAX-ACCESS read-only STATUS current DESCRIPTION "Additional client identification information. The type of this information is indicated by the value of the corresponding tn3270eTcpConnClientIdFormat object. All values are returned in network-byte order. The purpose of this object is to provide an alternate means of identifying a client, other than though the remote address returned in tn3270eTcpConnRemAddress." ::= { tn3270eTcpConnEntry 16 } tn3270eTcpConnTraceData OBJECT-TYPE SYNTAX Tn3270eTraceData MAX-ACCESS read-only STATUS current DESCRIPTION "Trace data for this session." ::= { tn3270eTcpConnEntry 17 } tn3270eTcpConnLogInfo OBJECT-TYPE SYNTAX IANATn3270eLogData MAX-ACCESS read-only STATUS current DESCRIPTION "Log information, encoded as specified in the IANATn3270eLogData textual convention from the IANAtn3270eTC-MIB." ::= { tn3270eTcpConnEntry 18 } tn3270eTcpConnLuLuBindImage OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "When there is a currently active LU-LU session for this connection, this object returns the BIND Image (defined to be bytes 1-p of the complete BIND Request Unit -- see 'SNA Formats' for more information) that was received from the PLU during session activation. When there is no active LU-LU session, or when a BIND image is unavailable for some other reason, this object returns a zero-length octet string." REFERENCE "'Systems Network Architecture Formats', IBM Publication GA27-3136." ::= { tn3270eTcpConnEntry 19 } tn3270eTcpConnSnaState OBJECT-TYPE SYNTAX INTEGER { unknown(1), noSluSession(2), sscpLuSession(3), -- but no LU-LU session luLuSession(4), -- but no SSCP-LU session sscpLuSessionAndLuLuSession(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the SNA side of the end-to-end TN3270 connection. The following states are defined: unknown(1) - The true state is not known. noSluSession(2) - The SLU has neither an SSCP-LU nor an LU-LU session active. sscpLuSession(3) - The SSCP-LU session for the SLU is active, but the SLU is not currently in session with a PLU. luLuSession(4) - The SLU is currently in session with a PLU, but the SSCP-LU session for the LU is not active. sscpLuSessionAndLuLuSession(5) - The SLU currently has an active session with a PLU, and the SSCP-LU session for the SLU is active." ::= { tn3270eTcpConnEntry 20 } tn3270eTcpConnStateLastDiscReason OBJECT-TYPE SYNTAX INTEGER { unknown(1), hostSendsUnbind(2), hostDontAcceptConnection(3), outOfResource(4), clientProtocolError(5), invalidDeviceName(6), deviceInUse(7), inactivityTimeout(8), hostNotResponding(9), clientNotResponding(10), serverClose(11), sysreqLogoff(12), serverSpecificHexCode(13) } MAX-ACCESS read-only STATUS current DESCRIPTION "The last disconnect reason. A session that has not experienced a disconnect shall use the value unknown(1) for this object. Depending on when an implementation removes entries from this table, certain states may never be returned." ::= { tn3270eTcpConnEntry 21 } tn3270eTcpConnSrvrConfIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "tn3270eSrvrConfIndex of the tn3270eSrvrConfEntry belonging to the TN3270E server to which this entry belongs." ::= { tn3270eTcpConnEntry 22 } tn3270eTcpConnActivationTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the sysUpTime object the last time this TCP connection became active." ::= { tn3270eTcpConnEntry 23 } tn3270eConfSpinLock OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-write STATUS current DESCRIPTION "An advisory lock used to allow cooperating TN3270E-MIB applications to coordinate their use of the tn3270eSrvrConfTable, the tn3270eSrvrPortTable, the tn3270eClientGroupTable, the tn3270eResPoolTable, and the tn3270eClientResMapTable. When creating a new entry or altering an existing entry in the any of the tables mentioned above, an application should make use of tn3270eRtSpinLock to serialize application changes or additions. Since this is an advisory lock, the use of this lock is not enforced." ::= { tn3270eObjects 10 } -- Conformance Definitions tn3270eGroups OBJECT IDENTIFIER ::= { tn3270eConformance 1 } tn3270eCompliances OBJECT IDENTIFIER ::= { tn3270eConformance 2 } -- compliance statements tn3270eCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for agents that support the TN3270E-MIB." MODULE -- this module MANDATORY-GROUPS { tn3270eBasicGroup, tn3270eSessionGroup } GROUP tn3270eResMapGroup DESCRIPTION "This group is optional and provides a method of performing tn3270eClientGroup to tn3270eResPool mapping." GROUP tn3270eHiCapacityGroup DESCRIPTION "This group is optional and provides for support of high capacity counters." OBJECT tn3270eSrvrConfConnectivityChk MIN-ACCESS read-only DESCRIPTION "The agent is not required to support a set to this object if the associated TN3270E server doesn't support either TIMING-MARK or NOP processing. In this case an agent should return noCheck on retrieval." OBJECT tn3270eSrvrConfTmNopInactTime MIN-ACCESS read-only DESCRIPTION "The agent is not required to support a set to this object if the functions enabled by tn3270eSrvrConfConnectivityChk are not supported. An agent in this case should return a value of 0." OBJECT tn3270eSrvrConfTmNopInterval MIN-ACCESS read-only DESCRIPTION "The agent is not required to support a set to this object if the functions enabled by tn3270eSrvrConfConnectivityChk are not supported. An agent in this case should return a value of 0." OBJECT tn3270eSrvrConfAdminStatus DESCRIPTION "A TN3270E server is not required to support a stopImmediate state transition." OBJECT tn3270eSrvrConfRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tn3270eSrvrConfTmTimeout MIN-ACCESS read-only DESCRIPTION "The agent is not required to support a set to this object if the functions enabled by tn3270eSrvrConfConnectivityChk are not supported. An agent in this case should return a value of 0." OBJECT tn3270eSrvrPortRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tn3270eClientGroupRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tn3270eResPoolRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tn3270eClientResMapRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { tn3270eCompliances 1 } -- units of conformance tn3270eBasicGroup OBJECT-GROUP OBJECTS { tn3270eSrvrConfInactivityTimeout, tn3270eSrvrConfConnectivityChk, tn3270eSrvrConfTmNopInactTime, tn3270eSrvrConfTmNopInterval, tn3270eSrvrFunctionsSupported, tn3270eSrvrConfAdminStatus, tn3270eSrvrConfOperStatus, tn3270eSrvrConfSessionTermState, tn3270eSrvrConfSrvrType, tn3270eSrvrConfContact, tn3270eSrvrConfRowStatus, tn3270eSrvrConfLastActTime, tn3270eSrvrConfTmTimeout, tn3270eSrvrPortRowStatus, tn3270eSrvrStatsUpTime, tn3270eSrvrStatsMaxTerms, tn3270eSrvrStatsInUseTerms, tn3270eSrvrStatsSpareTerms, tn3270eSrvrStatsMaxPtrs, tn3270eSrvrStatsInUsePtrs, tn3270eSrvrStatsSparePtrs, tn3270eSrvrStatsInConnects, tn3270eSrvrStatsConnResrceRejs, tn3270eSrvrStatsDisconnects, tn3270eSrvrStatsInOctets, tn3270eSrvrStatsOutOctets, tn3270eSrvrStatsConnErrorRejs, tn3270eClientGroupSubnetMask, tn3270eClientGroupPfxLength, tn3270eClientGroupRowStatus, tn3270eSnaMapLocalName, tn3270eSnaMapPrimaryLuName, tn3270eConfSpinLock } STATUS current DESCRIPTION "This group is mandatory for all hosts supporting the TN3270E-MIB." ::= { tn3270eGroups 1 } tn3270eSessionGroup OBJECT-GROUP OBJECTS { tn3270eResMapAddrType, tn3270eResMapAddress, tn3270eResMapPort, tn3270eResMapElementType, tn3270eResMapSscpSuppliedName, tn3270eTcpConnLastActivity, tn3270eTcpConnBytesIn, tn3270eTcpConnBytesOut, tn3270eTcpConnResourceElement, tn3270eTcpConnResourceType, tn3270eTcpConnDeviceType, tn3270eTcpConnFunctions, tn3270eTcpConnSrvrConfIndex, tn3270eTcpConnActivationTime } STATUS current DESCRIPTION "This group is mandatory for all hosts supporting the TN3270E-MIB." ::= { tn3270eGroups 2 } tn3270eResMapGroup OBJECT-GROUP OBJECTS { tn3270eResPoolElementType, tn3270eResPoolRowStatus, tn3270eClientResMapRowStatus, tn3270eTcpConnId, tn3270eTcpConnClientIdFormat, tn3270eTcpConnClientId, tn3270eTcpConnTraceData, tn3270eTcpConnLogInfo, tn3270eTcpConnLuLuBindImage, tn3270eTcpConnSnaState, tn3270eTcpConnStateLastDiscReason } STATUS current DESCRIPTION "This group is optional for all hosts supporting the TN3270E-MIB." ::= { tn3270eGroups 3 } tn3270eHiCapacityGroup OBJECT-GROUP OBJECTS { tn3270eSrvrStatsHCInOctets, tn3270eSrvrStatsHCOutOctets } STATUS current DESCRIPTION "Support of these objects is REQUIRED when the Counter32 versions can potentially wrap too frequently. This group is optional for all other hosts supporting the TN3270E-MIB. The IF-MIB (RFC 2233) requires that the 64-bit versions of its counters be implemented when an interface can support rates of around 20 million bits per second or greater. This implies a minimum wrap rate of just over 28 minutes. It is recommended that this same guideline be used for determining whether an implementation implements these objects. This group contains two objects with the syntax Counter64. An implementation that doesn't support these objects should return noSuchObject, since returning a zero is misleading." ::= { tn3270eGroups 4 } END