T11-FC-FSPF-MIB DEFINITIONS ::= BEGIN -- -- For management of FSPF, the Fibre Channel routing protocol. -- IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, Integer32, Unsigned32, TimeTicks, Gauge32, mib-2 FROM SNMPv2-SMI -- [RFC2578] MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF -- [RFC2580] TEXTUAL-CONVENTION, RowStatus, StorageType, TruthValue FROM SNMPv2-TC -- [RFC2579] ifIndex, InterfaceIndex FROM IF-MIB -- [RFC2863] fcmInstanceIndex, fcmSwitchIndex, FcDomainIdOrZero FROM FC-MGMT-MIB -- [FC-MGMT] T11FabricIndex FROM T11-TC-MIB -- [RFC4439] t11FamConfigDomainId FROM T11-FC-FABRIC-ADDR-MGR-MIB; -- [RFC4439] t11FcFspfMIB MODULE-IDENTITY LAST-UPDATED "200608140000Z" ORGANIZATION "T11" CONTACT-INFO "Claudio DeSanti Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 USA EMail: cds@cisco.com Keith McCloghrie Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA USA 95134 Email: kzm@cisco.com" DESCRIPTION "The MIB module for managing the Fabric Shortest Path First (FSPF) protocol. FSPF is specified in FC-SW-4. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4626; see the RFC itself for full legal notices." REVISION "200608140000Z" DESCRIPTION "Initial version of this MIB module published as RFC4626." ::= { mib-2 143 } t11FspfNotifications OBJECT IDENTIFIER ::= { t11FcFspfMIB 0 } t11FspfObjects OBJECT IDENTIFIER ::= { t11FcFspfMIB 1 } t11FspfConformance OBJECT IDENTIFIER ::= { t11FcFspfMIB 2 } t11FspfConfiguration OBJECT IDENTIFIER ::= { t11FspfObjects 1 } t11FspfDatabase OBJECT IDENTIFIER ::= { t11FspfObjects 2 } -- -- TEXTUAL CONVENTIONS T11FspfLsrType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Type of the Link State Record. FC-SW-4 defines two types of LSRs and allows for the possibility for more will be defined in the future: 01 - Switch Link Record 02 - Obsolete 240 - 255 - Vendor Specific others - Reserved. " REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4), ANSI INCITS 418-2006, section 6.1.9.3." SYNTAX Integer32 (0..255) T11FspfLinkType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Type of an the FSPF Link. Presently defined values: 1 - Point-to-Point 240-255 - Vendor Specific all others - Reserved. " REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4), ANSI INCITS 418-2006, section 6.1.9.4." SYNTAX Integer32 (0..255) T11FspfInterfaceState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The state of the FSPF Neighbor Finite State Machine for the neighbor (switch) on a particular interface. Possible values are : down(1) - Down init(2) - Init dbExchange(3) - Database Exchange dbAckwait(4) - Database AckWait dbWait(5) - Database Wait full(6) - Full (Connected) " REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4), ANSI INCITS 418-2006, section 8.7." SYNTAX INTEGER { down(1), init(2), dbExchange(3), dbAckwait(4), dbWait(5), full(6) } T11FspfLastCreationTime ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This TC describes an object that stores the last time it, and the row containing it, was created. This can be used by management applications to determine that a row has been deleted and re-created between reads, causing an otherwise undetectable discontinuity in the data." SYNTAX TimeTicks -- -- t11FspfTable t11FspfTable OBJECT-TYPE SYNTAX SEQUENCE OF T11FspfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table allows the users to configure and monitor FSPF's per-Fabric parameters and statistics on all Fabrics known to locally managed switches. Entries are created/removed by the agent if and when (Virtual) Fabrics are created/deleted." ::= { t11FspfConfiguration 1 } t11FspfEntry OBJECT-TYPE SYNTAX T11FspfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing FSPF variables, parameters, and statistics on a particular switch (identified by values of fcmInstanceIndex and fcmSwitchIndex) for a particular Fabric (identified by a t11FspfFabricIndex value). (Note that the local switch's per-fabric Domain-ID is available in t11FamConfigDomainId, which is defined in T11-FC-FABRIC-ADDR-MGR-MIB.)" INDEX { fcmInstanceIndex, fcmSwitchIndex, t11FspfFabricIndex } ::= { t11FspfTable 1 } T11FspfEntry ::= SEQUENCE { t11FspfFabricIndex T11FabricIndex, t11FspfMinLsArrival Unsigned32, t11FspfMinLsInterval Unsigned32, t11FspfLsRefreshTime Unsigned32, t11FspfMaxAge Unsigned32, t11FspfMaxAgeDiscards Counter32, t11FspfPathComputations Counter32, t11FspfChecksumErrors Counter32, t11FspfLsrs Gauge32, t11FspfCreateTime T11FspfLastCreationTime, t11FspfAdminStatus INTEGER, t11FspfOperStatus INTEGER, t11FspfNbrStateChangNotifyEnable TruthValue, t11FspfSetToDefault INTEGER, t11FspfStorageType StorageType } t11FspfFabricIndex OBJECT-TYPE SYNTAX T11FabricIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique index value that uniquely identifies a particular Fabric. In a Fabric conformant to FC-SW-4, multiple Virtual Fabrics can operate within one (or more) physical infrastructures. In such a case, index value is used to uniquely identify a particular Fabric within a physical infrastructure. In a Fabric that has (can have) only a single Fabric operating within the physical infrastructure, the value of this Fabric Index will always be 1." ::= { t11FspfEntry 1 } t11FspfMinLsArrival OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "milliSeconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum time after accepting a Link State Record (LSR) on this Fabric before accepting another update of the same LSR on the same Fabric. An LSR update that is not accepted because of this time interval is discarded." REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4), ANSI INCITS 418-2006, sections 8.6.4.5 & 15.1." DEFVAL {1000} ::= { t11FspfEntry 2 } t11FspfMinLsInterval OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "milliSeconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum time after this switch sends an LSR on this Fabric before it will send another update of the same LSR on the same Fabric." REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4), ANSI INCITS 418-2006, section 15.1." DEFVAL {5000} ::= { t11FspfEntry 3 } t11FspfLsRefreshTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "Minutes" MAX-ACCESS read-only STATUS current DESCRIPTION "The interval between transmission of refresh LSRs on this Fabric." REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4), ANSI INCITS 418-2006, sections 8.5.1 & 15.1." DEFVAL {30} ::= { t11FspfEntry 4 } t11FspfMaxAge OBJECT-TYPE SYNTAX Unsigned32 UNITS "Minutes" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum age an LSR will be retained in the FSPF database on this Fabric. An LSR is removed from the database after MaxAge is reached." REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4), ANSI INCITS 418-2006, section 15.1." DEFVAL {60} ::= { t11FspfEntry 5 } t11FspfMaxAgeDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LSRs discarded due to their age reaching t11FspfMaxAge in this Fabric. The last discontinuity of this counter is indicated by t11FspfCreateTime." ::= { t11FspfEntry 6 } t11FspfPathComputations OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times that the path computation algorithm has been invoked by this Switch on this Fabric to compute a set of minimum cost paths for this Fabric. The last discontinuity of this counter is indicated by t11FspfCreateTime." REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4), ANSI INCITS 418-2006, section 8.1.1." ::= { t11FspfEntry 7 } t11FspfChecksumErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of FSPF checksum errors that were detected locally (and therefore discarded) on this Fabric. The last discontinuity of this counter is indicated by t11FspfCreateTime." REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4), ANSI INCITS 418-2006, section 8.5.4." ::= { t11FspfEntry 8 } t11FspfLsrs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of entries for this Fabric in the t11FspfLsrTable." ::= { t11FspfEntry 9 } t11FspfCreateTime OBJECT-TYPE SYNTAX T11FspfLastCreationTime MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this entry was last created." ::= { t11FspfEntry 10 } t11FspfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The desired state of FSPF in this Fabric. If value of this object is set to 'up', then FSPF is enabled in this Fabric. If set to 'down', then FSPF is disabled in this Fabric -- when FSPF is disabled, FSPF provides no routes to be included in the T11-FC-ROUTE-MIB module. (see the T11-FC-ROUTE-MIB)." REFERENCE "T11-FC-ROUTE-MIB, The Fibre Channel Routing Information MIB, RFC4625." DEFVAL {up} ::= { t11FspfEntry 11 } t11FspfOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of FSPF in this Fabric. If 't11FspfAdminStatus' is 'down', then the 't11FspfOperStatus' should be 'down'. If 't11FspfAdminStatus' is changed to 'up', then 't11FspfOperStatus' should change to 'up' as and when FSPF is active in this Fabric." ::= { t11FspfEntry 12 } t11FspfNbrStateChangNotifyEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether or not the local agent should issue the notification 't11FspfNbrStateChangNotify' when the local switch learns of a change of state in the FSPF Neighbor Finite State Machine on an interface in this Fabric. If the value of the object is 'true, then the notification is generated. If the value is 'false', notification is not generated." DEFVAL { false } ::= { t11FspfEntry 13 } t11FspfSetToDefault OBJECT-TYPE SYNTAX INTEGER { default(1), noOp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this value to 'default' changes the value of each and every writable object in this row to its default value. No action is taken if this object is set to 'noOp'. The value of the object, when read, is always 'noOp'." ::= { t11FspfEntry 14 } t11FspfStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-write STATUS current DESCRIPTION "The storage type for read-write objects in this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { t11FspfEntry 15 } -- -- t11FspfIfTable t11FspfIfTable OBJECT-TYPE SYNTAX SEQUENCE OF T11FspfIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table allows the users to configure and monitor the FSPF parameters that are per-interface (identified by a t11FspfIfIndex value), per-Fabric (identified by a t11FspfFabricIndex value), and per-switch (identified by values of fcmInstanceIndex and fcmSwitchIndex). Creating a row in this table via t11FspfIfRowStatus provides the means to specify non-default parameter value(s) for an interface at a time when the relevant row in this table would not otherwise exist because the interface is either down or it is not an E_Port, but the corresponding row in the t11FspfTable must already exist. After the non-default values have been specified for a port's parameters, they need to be retained in this table, even when the port becomes 'isolated'. However, having unnecessary rows in this table clutters it up and makes those rows that are useful harder for an NMS to find. Therefore, when an E_Port becomes isolated, its row gets deleted if and only if all of its parameter values are the default values; also, when an E_Port becomes non-isolated in a particular Fabric, a row in this table needs to exist and is automatically created, if necessary. The specific conditions for an automated/implicit deletion of a row are: a) if the corresponding interface is no longer an E_Port (e.g., a G_Port which is dynamically determined to be an F_Port), and all configurable parameters have default values; or b) if the interface identified by t11FspfIfIndex no longer exists (e.g., because a line-card is physically removed); or c) if the corresponding row in the t11FspfTable is deleted. " ::= { t11FspfConfiguration 2 } t11FspfIfEntry OBJECT-TYPE SYNTAX T11FspfIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing FSPF information for the interface identified by t11FspfIfIndex, on the fabric identified by t11FspfFabricIndex, on the switch identified by fcmSwitchIndex." INDEX { fcmInstanceIndex, fcmSwitchIndex, t11FspfFabricIndex, t11FspfIfIndex } ::= { t11FspfIfTable 1 } T11FspfIfEntry ::= SEQUENCE { t11FspfIfIndex InterfaceIndex, t11FspfIfHelloInterval Unsigned32, t11FspfIfDeadInterval Unsigned32, t11FspfIfRetransmitInterval Unsigned32, t11FspfIfInLsuPkts Counter32, t11FspfIfInLsaPkts Counter32, t11FspfIfOutLsuPkts Counter32, t11FspfIfOutLsaPkts Counter32, t11FspfIfOutHelloPkts Counter32, t11FspfIfInHelloPkts Counter32, t11FspfIfRetransmittedLsuPkts Counter32, t11FspfIfInErrorPkts Counter32, t11FspfIfNbrState T11FspfInterfaceState, t11FspfIfNbrDomainId FcDomainIdOrZero, t11FspfIfNbrPortIndex Unsigned32, t11FspfIfAdminStatus INTEGER, t11FspfIfCreateTime T11FspfLastCreationTime, t11FspfIfSetToDefault INTEGER, t11FspfIfLinkCostFactor Unsigned32, t11FspfIfStorageType StorageType, t11FspfIfRowStatus RowStatus } t11FspfIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of ifIndex that identifies the local Fibre Channel interface for which this entry contains FSPF information." ::= { t11FspfIfEntry 1 } t11FspfIfHelloInterval OBJECT-TYPE SYNTAX Unsigned32 (1..65535) UNITS "Seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Interval between the periodic HELLO messages sent on this interface in this Fabric to verify the link health. Note that this value must be same at both ends of a link in this Fabric." DEFVAL {20} ::= { t11FspfIfEntry 2 } t11FspfIfDeadInterval OBJECT-TYPE SYNTAX Unsigned32 (2..65535) UNITS "Seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum time for which no HELLO messages can be received on this interface in this Fabric. After this time, the interface is assumed to be broken and removed from the database. Note that this value must be greater than the HELLO interval specified on this interface in this Fabric." DEFVAL {80} ::= { t11FspfIfEntry 3 } t11FspfIfRetransmitInterval OBJECT-TYPE SYNTAX Unsigned32 (1..65535) UNITS "Seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The time after which an unacknowledged LSR is retransmitted on this interface in this Fabric." DEFVAL {5} ::= { t11FspfIfEntry 4 } t11FspfIfInLsuPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Link State Update (LSU) packets received on this interface in this Fabric. The last discontinuity of this counter is indicated by t11FspfIfCreateTime." ::= { t11FspfIfEntry 5 } t11FspfIfInLsaPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Link State Acknowledgement (LSA) packets received on this interface in this Fabric. The last discontinuity of this counter is indicated by t11FspfIfCreateTime." ::= { t11FspfIfEntry 6 } t11FspfIfOutLsuPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Link State Update (LSU) packets transmitted on this interface in this Fabric. The last discontinuity of this counter is indicated by t11FspfIfCreateTime." ::= { t11FspfIfEntry 7 } t11FspfIfOutLsaPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Link State Acknowledgement (LSA) packets transmitted on this interface in this Fabric. The last discontinuity of this counter is indicated by t11FspfIfCreateTime." ::= { t11FspfIfEntry 8 } t11FspfIfOutHelloPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of HELLO packets transmitted on this interface in this Fabric. The last discontinuity of this counter is indicated by t11FspfIfCreateTime." ::= { t11FspfIfEntry 9 } t11FspfIfInHelloPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of HELLO packets received on this interface in this Fabric. The last discontinuity of this counter is indicated by t11FspfIfCreateTime." ::= { t11FspfIfEntry 10 } t11FspfIfRetransmittedLsuPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LSU packets that contained one or more retransmitted LSRs, and that were transmitted on this interface in this Fabric. The last discontinuity of this counter is indicated by t11FspfIfCreateTime." ::= { t11FspfIfEntry 11 } t11FspfIfInErrorPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of invalid FSPF control packets received on this interface in this Fabric. The last discontinuity of this counter is indicated by t11FspfIfCreateTime." ::= { t11FspfIfEntry 12 } t11FspfIfNbrState OBJECT-TYPE SYNTAX T11FspfInterfaceState MAX-ACCESS read-only STATUS current DESCRIPTION "The state of FSPF's 'neighbor state machine', which is the operational state of the interaction with the neighbor's interface that is connected to this interface. If the 't11FspfIfAdminStatus' is 'down', then this object should be 'down'. If the 't11FspfIfAdminStatus' is 'up', then this object's value depends on the state of FSPF's 'neighbor state machine' on this interface in this Fabric." REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4), ANSI INCITS 418-2006, section 8.7" ::= { t11FspfIfEntry 13 } t11FspfIfNbrDomainId OBJECT-TYPE SYNTAX FcDomainIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The Domain Id of the neighbor in this Fabric." ::= { t11FspfIfEntry 14 } t11FspfIfNbrPortIndex OBJECT-TYPE SYNTAX Unsigned32 (0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "The index, as known by the neighbor, of the neighbor's interface that is connected to this interface in this Fabric." REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4), ANSI INCITS 418-2006, section 6.1.9.4." ::= { t11FspfIfEntry 15 } t11FspfIfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The desired state of FSPF on this interface in this Fabric, whenever 't11FspfAdminStatus' is 'up'. If the value of this object is set to 'up', then FSPF is enabled on this interface in this Fabric. If set to 'down', then FSPF is disabled on this interface in this Fabric. Note that the operational state of FSPF on an interface is given by t11FspfIfNbrState." DEFVAL {up} ::= { t11FspfIfEntry 16 } t11FspfIfCreateTime OBJECT-TYPE SYNTAX T11FspfLastCreationTime MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this entry was last created." ::= { t11FspfIfEntry 17 } t11FspfIfSetToDefault OBJECT-TYPE SYNTAX INTEGER { default(1), noOp(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Setting this value to 'default' changes the value of each and every writable object in this row to its default value. If all the configuration parameters have their default values, and if the interface is down, then the row is deleted automatically. No action is taken if this object is set to 'noOp'. The value of the object, when read, is always 'noOp'." ::= { t11FspfIfEntry 18 } t11FspfIfLinkCostFactor OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative factor used in calculating the cost of sending a frame on this interface in this Fabric. The formula used to calculate the link cost is: Link Cost = S * (1.0625e12 / ifSpeed) where: S = (the value of this object / 100) ifSpeed = interface speed (as defined in the IF-MIB). " REFERENCE "Fibre Channel - Switch Fabric - 4 (FC-SW-4), ANSI INCITS 418-2006, section 8.5.5; and IF-MIB, RFC 2863." DEFVAL { 100 } ::= { t11FspfIfEntry 19 } t11FspfIfStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { t11FspfIfEntry 20 } t11FspfIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the conceptual row. This object can be used to create an entry only if there is an entry in the t11FspfTable for the corresponding Fabric, and if the interface is either isolated or is a non-E_port. Setting this object to 'destroy' will typically fail; to reverse the creation process, set the corresponding instance of t11FspfIfSetToDefault to 'default'." ::= { t11FspfIfEntry 21 } -- -- t11FspfLsrTable t11FspfLsrTable OBJECT-TYPE SYNTAX SEQUENCE OF T11FspfLsrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is the database of all the latest incarnations of the Link State Records (LSRs) that are currently contained in the topology database, for all interfaces on all Fabrics known to locally managed switches. A Fabric's topology database contains the LSRs that have been either issued or received by a local switch on that Fabric, and that have not reached t11FspfMaxAge." ::= { t11FspfDatabase 1 } t11FspfLsrEntry OBJECT-TYPE SYNTAX T11FspfLsrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This gives information for the most recent update of an LSR. There is one entry for every LSR issued or received by a locally managed switch (identified by fcmInstanceIndex and fcmSwitchIndex) in a Fabric (identified by t11FspfFabricIndex)." INDEX { fcmInstanceIndex, fcmSwitchIndex, t11FspfFabricIndex, t11FspfLsrDomainId, t11FspfLsrType } ::= { t11FspfLsrTable 1 } T11FspfLsrEntry ::= SEQUENCE { t11FspfLsrDomainId FcDomainIdOrZero, t11FspfLsrType T11FspfLsrType, t11FspfLsrAdvDomainId FcDomainIdOrZero, t11FspfLsrAge Unsigned32, t11FspfLsrIncarnationNumber Unsigned32, t11FspfLsrCheckSum Unsigned32, t11FspfLsrLinks Unsigned32 } t11FspfLsrDomainId OBJECT-TYPE SYNTAX FcDomainIdOrZero MAX-ACCESS not-accessible STATUS current DESCRIPTION "Domain Id of the LSR owner in this Fabric. It is the Link State Id of this LSR." ::= { t11FspfLsrEntry 1 } t11FspfLsrType OBJECT-TYPE SYNTAX T11FspfLsrType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Type of this LSR." ::= { t11FspfLsrEntry 2 } t11FspfLsrAdvDomainId OBJECT-TYPE SYNTAX FcDomainIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "Domain Id of the switch that is advertising the LSR on the behalf of the switch owning it." ::= { t11FspfLsrEntry 3 } t11FspfLsrAge OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "Seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The time since this LSR was inserted into the database." ::= { t11FspfLsrEntry 4 } t11FspfLsrIncarnationNumber OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The link state incarnation number of this LSR. This is used to identify most recent instance of an LSR while updating the topology database when an LSR is received. The updating of an LSR includes incrementing its incarnation number prior to transmission of the updated LSR. So, the most recent LSR is the one with the largest incarnation number." ::= { t11FspfLsrEntry 5 } t11FspfLsrCheckSum OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The checksum of the LSR." ::= { t11FspfLsrEntry 6 } t11FspfLsrLinks OBJECT-TYPE SYNTAX Unsigned32 (0..65355) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of entries in the t11FspfLinkTable associated with this LSR." ::= { t11FspfLsrEntry 7 } -- -- t11FspfLinkTable t11FspfLinkNumber OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of rows in the t11FspfLinkTable." ::= { t11FspfDatabase 3 } t11FspfLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF T11FspfLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the list of Inter-Switch Links and their information that is part of an LSR, either received or transmitted." ::= { t11FspfDatabase 4 } t11FspfLinkEntry OBJECT-TYPE SYNTAX T11FspfLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry that contains information about a link contained in an LSR in this Fabric. An entry is created whenever a new link appears in an (issued or received) LSR. An entry is deleted when a link no longer appears in an (issued or received) LSR." INDEX { fcmInstanceIndex, fcmSwitchIndex, t11FspfFabricIndex, t11FspfLsrDomainId, t11FspfLsrType, t11FspfLinkIndex} ::= { t11FspfLinkTable 1 } T11FspfLinkEntry ::= SEQUENCE { t11FspfLinkIndex Unsigned32, t11FspfLinkNbrDomainId FcDomainIdOrZero, t11FspfLinkPortIndex Unsigned32, t11FspfLinkNbrPortIndex Unsigned32, t11FspfLinkType T11FspfLinkType, t11FspfLinkCost Integer32 } t11FspfLinkIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary index of this link." ::= { t11FspfLinkEntry 1 } t11FspfLinkNbrDomainId OBJECT-TYPE SYNTAX FcDomainIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The Domain Id of the neighbor on the other end of this link in this Fabric." ::= { t11FspfLinkEntry 2 } t11FspfLinkPortIndex OBJECT-TYPE SYNTAX Unsigned32 (0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "The source E_port of this link, as indicated by the index value in the LSR received from the switch identified by 't11FspfLsrDomainId'." ::= { t11FspfLinkEntry 3 } t11FspfLinkNbrPortIndex OBJECT-TYPE SYNTAX Unsigned32 (0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "The destination E_port of this link, as indicated by the index value in the LSR received from the switch identified by 't11FspfLinkNbrDomainId'." ::= { t11FspfLinkEntry 4 } t11FspfLinkType OBJECT-TYPE SYNTAX T11FspfLinkType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of this link." ::= { t11FspfLinkEntry 5 } t11FspfLinkCost OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The cost of sending a frame on this link in this Fabric. Link cost is calculated using the formula: link cost = S * (1.0625e12 / Signalling Rate) For issued LSRs, S is determined by the value of t11FspfIfLinkCostFactor for the corresponding interface and Fabric." ::= { t11FspfLinkEntry 6 } -- -- Notification-related object t11FspfIfPrevNbrState OBJECT-TYPE SYNTAX T11FspfInterfaceState MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The previous state of FSPF's Neighbor Finite State Machine on an interface. This object is only used in the 't11FspfNbrStateChangNotify' notification." ::= { t11FspfConfiguration 3 } -- -- Notifications t11FspfNbrStateChangNotify NOTIFICATION-TYPE OBJECTS { ifIndex, t11FamConfigDomainId, t11FspfIfNbrDomainId, t11FspfIfNbrState, t11FspfIfPrevNbrState } STATUS current DESCRIPTION "This notification signifies that there has been a change in the state of an FSPF neighbor. This is generated when the FSPF state changes to a terminal state, through either regression (i.e., goes from Full to Init or Down) or progression (i.e., from any state to Full). The value of 't11FspfIfNbrState' is the state of the neighbor after the change." ::= { t11FspfNotifications 1 } -- -- Conformance t11FspfMIBCompliances OBJECT IDENTIFIER ::= { t11FspfConformance 1 } t11FspfMIBGroups OBJECT IDENTIFIER ::= { t11FspfConformance 2 } t11FspfMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities that implement the FSPF." MODULE -- this module MANDATORY-GROUPS { t11FspfGeneralGroup, t11FspfIfGroup, t11FspfDatabaseGroup, t11FspfNotificationGroup } GROUP t11FspfIfCounterGroup DESCRIPTION "These counters, for particular FSPF-packet occurrences on an interface, are mandatory only for those systems that count such events." OBJECT t11FspfIfRowStatus SYNTAX INTEGER { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, so only one value needs to be supported." OBJECT t11FspfIfStorageType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11FspfNbrStateChangNotifyEnable MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11FspfMinLsArrival MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11FspfMinLsInterval MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11FspfAdminStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11FspfSetToDefault MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11FspfStorageType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11FspfIfHelloInterval MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11FspfIfDeadInterval MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11FspfIfRetransmitInterval MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11FspfIfAdminStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11FspfIfSetToDefault MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT t11FspfIfLinkCostFactor MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { t11FspfMIBCompliances 1 } -- Units of Conformance t11FspfGeneralGroup OBJECT-GROUP OBJECTS { t11FspfMinLsArrival, t11FspfMinLsInterval, t11FspfLsRefreshTime, t11FspfMaxAge, t11FspfMaxAgeDiscards, t11FspfPathComputations, t11FspfChecksumErrors, t11FspfLsrs, t11FspfCreateTime, t11FspfAdminStatus, t11FspfOperStatus, t11FspfNbrStateChangNotifyEnable, t11FspfSetToDefault, t11FspfStorageType } STATUS current DESCRIPTION "A collection of objects for displaying and configuring FSPF parameters." ::= { t11FspfMIBGroups 1 } t11FspfIfGroup OBJECT-GROUP OBJECTS { t11FspfIfHelloInterval, t11FspfIfDeadInterval, t11FspfIfRetransmitInterval, t11FspfIfNbrState, t11FspfIfNbrDomainId, t11FspfIfNbrPortIndex, t11FspfIfAdminStatus, t11FspfIfCreateTime, t11FspfIfSetToDefault, t11FspfIfLinkCostFactor, t11FspfIfRowStatus, t11FspfIfStorageType, t11FspfIfPrevNbrState } STATUS current DESCRIPTION "A collection of objects for displaying the FSPF interface information." ::= { t11FspfMIBGroups 2 } t11FspfIfCounterGroup OBJECT-GROUP OBJECTS { t11FspfIfInLsuPkts, t11FspfIfInLsaPkts, t11FspfIfOutLsuPkts, t11FspfIfOutLsaPkts, t11FspfIfOutHelloPkts, t11FspfIfInHelloPkts, t11FspfIfRetransmittedLsuPkts, t11FspfIfInErrorPkts } STATUS current DESCRIPTION "A collection of objects for counting particular FSPF-packet occurrences on an interface." ::= { t11FspfMIBGroups 3 } t11FspfDatabaseGroup OBJECT-GROUP OBJECTS { t11FspfLsrAdvDomainId, t11FspfLsrAge, t11FspfLsrIncarnationNumber, t11FspfLsrCheckSum, t11FspfLsrLinks, t11FspfLinkNbrDomainId, t11FspfLinkPortIndex, t11FspfLinkNbrPortIndex, t11FspfLinkType, t11FspfLinkCost, t11FspfLinkNumber } STATUS current DESCRIPTION "A collection of objects for displaying the FSPF topology database information." ::= { t11FspfMIBGroups 4 } t11FspfNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { t11FspfNbrStateChangNotify } STATUS current DESCRIPTION "A collection of notifications for FSPF." ::= { t11FspfMIBGroups 5 } END