SLAPM-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, experimental, Integer32, NOTIFICATION-TYPE, Gauge32, Counter32, Unsigned32 FROM SNMPv2-SMI -- RFC2578 TEXTUAL-CONVENTION, RowStatus, TestAndIncr, DateAndTime FROM SNMPv2-TC -- RFC2579 MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF -- RFC2580 SnmpAdminString FROM SNMP-FRAMEWORK-MIB; -- RFC2571 slapmMIB MODULE-IDENTITY LAST-UPDATED "200001240000Z" -- 24 January 2000 ORGANIZATION "International Business Machines Corp." CONTACT-INFO "Kenneth White International Business Machines Corporation Network Computing Software Division Research Triangle Park, NC, USA E-mail: wkenneth@us.ibm.com" DESCRIPTION "The Service Level Agreement Performance Monitoring MIB (SLAPM-MIB) provides data collection and monitoring capabilities for Service Level Agreements (SLAs) policy definitions." -- Revision history REVISION "200001240000Z" -- 24 January 2000 DESCRIPTION "This version published as RFC 2758." ::= { experimental 88 } -- Textual Conventions SlapmNameType ::= TEXTUAL-CONVENTION STATUS deprecated DESCRIPTION "The textual convention for naming entities within this MIB. The actual contents of an object defined using this textual convention should consist of the distinguished name portion of an name. This is usually the right-most portion of the name. This convention is necessary, since names within this MIB can be used as index items and an instance identifier is limited to 128 subidentifiers. This textual convention has been deprecated. All of the tables defined within this MIB that use this textual convention have been deprecated as well since the method of using a portion of the name (either of a policy definition or of a traffic profile) has been replaced by using an Unsigned32 index. The new slapmPolicyNameTable would then map the Unsigned32 index to a real name." SYNTAX SnmpAdminString (SIZE(0..32)) SlapmStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The textual convention for defining the various slapmPRMonTable (or old slapmPolicyMonitorTable) and the slapmSubcomponentTable states for actual policy rule traffic monitoring." SYNTAX BITS { slaMinInRateNotAchieved(0), slaMaxInRateExceeded(1), slaMaxDelayExceeded(2), slaMinOutRateNotAchieved(3), slaMaxOutRateExceeded(4), monitorMinInRateNotAchieved(5), monitorMaxInRateExceeded(6), monitorMaxDelayExceeded(7), monitorMinOutRateNotAchieved(8), monitorMaxOutRateExceeded(9) } SlapmPolicyRuleName ::= TEXTUAL-CONVENTION DISPLAY-HINT "1024t" STATUS current DESCRIPTION "To facilitate internationalization, this TC represents information taken from the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 character encoding scheme described in RFC 2044. For strings in 7-bit US-ASCII, there is no impact since the UTF-8 representation is identical to the US-ASCII encoding." SYNTAX OCTET STRING (SIZE (0..1024)) -- Top-level structure of the MIB slapmNotifications OBJECT IDENTIFIER ::= { slapmMIB 0 } slapmObjects OBJECT IDENTIFIER ::= { slapmMIB 1 } slapmConformance OBJECT IDENTIFIER ::= { slapmMIB 2 } -- All scalar objects slapmBaseObjects OBJECT IDENTIFIER ::= { slapmObjects 1 } -- Scalar Object Definitions slapmSpinLock OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-write STATUS current DESCRIPTION "An advisory lock used to allow cooperating applications to coordinate their use of the contents of this MIB. This typically occurs when an application seeks to create an new entry or alter an existing entry in slapmPRMonTable (or old slapmPolicyMonitorTable). A management implementation MAY utilize the slapmSpinLock to serialize its changes or additions. This usage is not required. However, slapmSpinLock MUST be supported by agent implementations." ::= { slapmBaseObjects 1 } slapmPolicyCountQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times that a policy lookup occurred with respect to a policy agent. This is the number of times that a reference was made to a policy definition at a system and includes the number of times that a policy repository was accessed, slapmPolicyCountAccesses. The object slapmPolicyCountAccesses should be less than slapmPolicyCountQueries when policy definitions are cached at a system." ::= { slapmBaseObjects 2 } slapmPolicyCountAccesses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of times that a policy repository was accessed with respect to a policy agent. The value of this object should be less than slapmPolicyCountQueries, since typically policy entries are cached to minimize repository accesses." ::= { slapmBaseObjects 3 } slapmPolicyCountSuccessAccesses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of successful policy repository accesses with respect to a policy agent." ::= { slapmBaseObjects 4 } slapmPolicyCountNotFounds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of policy repository accesses, with respect to a policy agent, that resulted in an entry not being located." ::= { slapmBaseObjects 5 } slapmPolicyPurgeTime OBJECT-TYPE SYNTAX Integer32 (0..3600) -- maximum of 1 hour UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The purpose of this object is to define the amount of time (in seconds) to wait before removing an slapmPolicyRuleStatsEntry (or old slapmPolicyStatsEntry) when a system detects that the associated policy definition has been deleted. This gives any polling management applications time to complete their last poll before an entry is removed. An slapmPolicyRuleStatsEntry (or old slapmPolicyStatsEntry) enters the deleteNeeded(3) state via slapmPolicyRuleStatsOperStatus (or old slapmPolicyStatsOperStatus) when a system first detects that the entry needs to be removed. Once slapmPolicyPurgeTime has expired for an entry in deleteNeeded(3) state it is removed a long with any dependent slapmPRMonTable (or slapmPolicyMonitorTable) entries. A value of 0 for this option disables this function and results in the automatic purging of slapmPRMonTable (or slapmPolicyTable) entries upon transition into deleteNeeded(3) state. A slapmPolicyRuleDeleted (or slapmPolicyProfileDeleted) notification is sent when an slapmPolicyRuleStatsEntry (or slapmPolicyStatsEntry) is removed. Dependent slapmPRMonTable (or slapmPolicyMonitorTable) deletion results in a slapmPolicyRuleMonDeleted (or slapmPolicyMonitorDeleted) notification being sent. These notifications are suppressed if the value of slapmPolicyTrapEnable is disabled(2)." DEFVAL { 900 } -- 15 minute default purge time ::= { slapmBaseObjects 6 } slapmPolicyTrapEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether slapmPolicyRuleDeleted and slapmPolicyRuleMonDeleted (or slapmPolicyProfileDeleted and slapmPolicyMonitorDeleted) notifications should be generated by this system." DEFVAL { disabled } ::= { slapmBaseObjects 7 } slapmPolicyTrapFilter OBJECT-TYPE SYNTAX Integer32 (0..64) UNITS "intervals" MAX-ACCESS read-write STATUS current DESCRIPTION "The purpose of this object is to suppress unnecessary slapmSubcMonitorNotOkay (or slapmSubcomponentMonitoredEventNotAchieved), for example, notifications. Basically, a monitored event has to not meet its SLA requirement for the number of consecutive intervals indicated by the value of this object." DEFVAL { 3 } ::= { slapmBaseObjects 8 } slapmTableObjects OBJECT IDENTIFIER ::= { slapmObjects 2 } -- Sla Performance Monitoring Policy Statistics Table slapmPolicyStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SlapmPolicyStatsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Provides statistics on all policies known at a system. This table has been deprecated and replaced with the slapmPolicyRuleStatsTable. Older implementations of this MIB are expected to continue their support of this table." ::= { slapmTableObjects 1 } slapmPolicyStatsEntry OBJECT-TYPE SYNTAX SlapmPolicyStatsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Defines an entry in the slapmPolicyStatsTable. This table defines a set of statistics that is kept on a per system, policy and traffic profile basis. A policy can be defined to contain multiple traffic profiles that map to a single action. Entries in this table are not created or deleted via SNMP but reflect the set of policy definitions known at a system." INDEX { slapmPolicyStatsSystemAddress, slapmPolicyStatsPolicyName, slapmPolicyStatsTrafficProfileName } ::= { slapmPolicyStatsTable 1 } SlapmPolicyStatsEntry ::= SEQUENCE { slapmPolicyStatsSystemAddress OCTET STRING, slapmPolicyStatsPolicyName SlapmNameType, slapmPolicyStatsTrafficProfileName SlapmNameType, slapmPolicyStatsOperStatus INTEGER, slapmPolicyStatsActiveConns Gauge32, slapmPolicyStatsTotalConns Counter32, slapmPolicyStatsFirstActivated DateAndTime, slapmPolicyStatsLastMapping DateAndTime, slapmPolicyStatsInOctets Counter32, slapmPolicyStatsOutOctets Counter32, slapmPolicyStatsConnectionLimit Integer32, slapmPolicyStatsCountAccepts Counter32, slapmPolicyStatsCountDenies Counter32, slapmPolicyStatsInDiscards Counter32, slapmPolicyStatsOutDiscards Counter32, slapmPolicyStatsInPackets Counter32, slapmPolicyStatsOutPackets Counter32, slapmPolicyStatsInProfileOctets Counter32, slapmPolicyStatsOutProfileOctets Counter32, slapmPolicyStatsMinRate Integer32, slapmPolicyStatsMaxRate Integer32, slapmPolicyStatsMaxDelay Integer32 } slapmPolicyStatsSystemAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0 | 4 | 16)) MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Address of a system that an Policy definition relates to. A zero length octet string must be used to indicate that only a single system is being represented. Otherwise, the length of the octet string must be 4 for an ipv4 address or 16 for an ipv6 address." ::= { slapmPolicyStatsEntry 1 } slapmPolicyStatsPolicyName OBJECT-TYPE SYNTAX SlapmNameType MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Policy name that this entry relates to." ::= { slapmPolicyStatsEntry 2 } slapmPolicyStatsTrafficProfileName OBJECT-TYPE SYNTAX SlapmNameType MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The name of a traffic profile that is associated with a policy." ::= { slapmPolicyStatsEntry 3 } slapmPolicyStatsOperStatus OBJECT-TYPE SYNTAX INTEGER { inactive(1), active(2), deleteNeeded(3) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The state of a policy entry: inactive(1) - An policy entry was either defined by local system definition or discovered via a directory search but has not been activated (not currently being used). active(2) - Policy entry is being used to affect traffic flows. deleteNeeded(3) - Either though local implementation dependent methods or by discovering that the directory entry corresponding to this table entry no longer exists and slapmPolicyPurgeTime needs to expire before attempting to remove the corresponding slapmPolicyStatsEntry and any dependent slapmPolicyMonitor table entries. Note: a policy traffic profile in a state other than active(1) is not being used to affect traffic flows." ::= { slapmPolicyStatsEntry 4 } slapmPolicyStatsActiveConns OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of active TCP connections that are affected by the corresponding policy entry." ::= { slapmPolicyStatsEntry 5 } slapmPolicyStatsTotalConns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of total TCP connections that are affected by the corresponding policy entry." ::= { slapmPolicyStatsEntry 6 } slapmPolicyStatsFirstActivated OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The timestamp for when the corresponding policy entry is activated. The value of this object serves as the discontinuity event indicator when polling entries in this table. The value of this object is updated on transition of slapmPolicyStatsOperStatus into the active(2) state." DEFVAL { '0000000000000000'H } ::= { slapmPolicyStatsEntry 7 } slapmPolicyStatsLastMapping OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The timestamp for when the last time that the associated policy entry was used." DEFVAL { '0000000000000000'H } ::= { slapmPolicyStatsEntry 8 } slapmPolicyStatsInOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of octets that was received by IP for an entity that map to this entry." ::= { slapmPolicyStatsEntry 9 } slapmPolicyStatsOutOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of octets that was transmitted by IP for an entity that map to this entry." ::= { slapmPolicyStatsEntry 10 } slapmPolicyStatsConnectionLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The limit for the number of active TCP connections that are allowed for this policy definition. A value of zero for this object implies that a connection limit has not been specified." ::= { slapmPolicyStatsEntry 11 } slapmPolicyStatsCountAccepts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This counter is incremented when a policy action's Permission value is set to Accept and a session (TCP connection) is accepted." ::= { slapmPolicyStatsEntry 12 } slapmPolicyStatsCountDenies OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This counter is incremented when a policy action's Permission value is set to Deny and a session is denied, or when a session (TCP connection) is rejected due to a policy's connection limit (slapmPolicyStatsConnectLimit) being reached." ::= { slapmPolicyStatsEntry 13 } slapmPolicyStatsInDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This counter counts the number of in octets discarded. This occurs when an error is detected. Examples of this are buffer overflow, checksum error, or bad packet format." ::= { slapmPolicyStatsEntry 14 } slapmPolicyStatsOutDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This counter counts the number of out octets discarded. Examples of this are buffer overflow, checksum error, or bad packet format." ::= { slapmPolicyStatsEntry 15 } slapmPolicyStatsInPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This counter counts the number of in packets received that relate to this policy entry from IP." ::= { slapmPolicyStatsEntry 16 } slapmPolicyStatsOutPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This counter counts the number of out packets sent by IP that relate to this policy entry." ::= { slapmPolicyStatsEntry 17 } slapmPolicyStatsInProfileOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This counter counts the number of in octets that are determined to be within profile." ::= { slapmPolicyStatsEntry 18 } slapmPolicyStatsOutProfileOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This counter counts the number of out octets that are determined to be within profile." ::= { slapmPolicyStatsEntry 19 } slapmPolicyStatsMinRate OBJECT-TYPE SYNTAX Integer32 UNITS "Kilobits per second" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The minimum transfer rate defined for this entry." ::= { slapmPolicyStatsEntry 20 } slapmPolicyStatsMaxRate OBJECT-TYPE SYNTAX Integer32 UNITS "Kilobits per second" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The maximum transfer rate defined for this entry." ::= { slapmPolicyStatsEntry 21 } slapmPolicyStatsMaxDelay OBJECT-TYPE SYNTAX Integer32 UNITS "milliseconds" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The maximum delay defined for this entry." ::= { slapmPolicyStatsEntry 22 } -- SLA Performance Monitoring Policy Monitor Table slapmPolicyMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF SlapmPolicyMonitorEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Provides a method of monitoring policies and their effect at a system. This table has been deprecated and replaced with the slapmPRMonTable. Older implementations of this MIB are expected to continue their support of this table." ::= { slapmTableObjects 2 } slapmPolicyMonitorEntry OBJECT-TYPE SYNTAX SlapmPolicyMonitorEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Defines an entry in the slapmPolicyMonitorTable. This table defines which policies should be monitored on a per policy traffic profile basis." INDEX { slapmPolicyMonitorOwnerIndex, slapmPolicyMonitorSystemAddress, slapmPolicyMonitorPolicyName, slapmPolicyMonitorTrafficProfileName } ::= { slapmPolicyMonitorTable 1 } SlapmPolicyMonitorEntry ::= SEQUENCE { slapmPolicyMonitorOwnerIndex SnmpAdminString, slapmPolicyMonitorSystemAddress OCTET STRING, slapmPolicyMonitorPolicyName SlapmNameType, slapmPolicyMonitorTrafficProfileName SlapmNameType, slapmPolicyMonitorControl BITS, slapmPolicyMonitorStatus SlapmStatus, slapmPolicyMonitorInterval Integer32, slapmPolicyMonitorIntTime DateAndTime, slapmPolicyMonitorCurrentInRate Gauge32, slapmPolicyMonitorCurrentOutRate Gauge32, slapmPolicyMonitorMinRateLow Integer32, slapmPolicyMonitorMinRateHigh Integer32, slapmPolicyMonitorMaxRateHigh Integer32, slapmPolicyMonitorMaxRateLow Integer32, slapmPolicyMonitorMaxDelayHigh Integer32, slapmPolicyMonitorMaxDelayLow Integer32, slapmPolicyMonitorMinInRateNotAchieves Counter32, slapmPolicyMonitorMaxInRateExceeds Counter32, slapmPolicyMonitorMaxDelayExceeds Counter32, slapmPolicyMonitorMinOutRateNotAchieves Counter32, slapmPolicyMonitorMaxOutRateExceeds Counter32, slapmPolicyMonitorCurrentDelayRate Gauge32, slapmPolicyMonitorRowStatus RowStatus } slapmPolicyMonitorOwnerIndex OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..16)) MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "To facilitate the provisioning of access control by a security administrator using the View-Based Access Control Model (RFC 2575, VACM) for tables in which multiple users may need to independently create or modify entries, the initial index is used as an 'owner index'. Such an initial index has a syntax of SnmpAdminString, and can thus be trivially mapped to a securityName or groupName as defined in VACM, in accordance with a security policy. All entries in that table belonging to a particular user will have the same value for this initial index. For a given user's entries in a particular table, the object identifiers for the information in these entries will have the same subidentifiers (except for the 'column' subidentifier) up to the end of the encoded owner index. To configure VACM to permit access to this portion of the table, one would create vacmViewTreeFamilyTable entries with the value of vacmViewTreeFamilySubtree including the owner index portion, and vacmViewTreeFamilyMask 'wildcarding' the column subidentifier. More elaborate configurations are possible." ::= { slapmPolicyMonitorEntry 1 } slapmPolicyMonitorSystemAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0 | 4 | 16)) MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Address of a system that an Policy definition relates to. A zero length octet string can be used to indicate that only a single system is being represented. Otherwise, the length of the octet string should be 4 for an ipv4 address and 16 for an ipv6 address." ::= { slapmPolicyMonitorEntry 2 } slapmPolicyMonitorPolicyName OBJECT-TYPE SYNTAX SlapmNameType MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Policy name that this entry relates to." ::= { slapmPolicyMonitorEntry 3 } slapmPolicyMonitorTrafficProfileName OBJECT-TYPE SYNTAX SlapmNameType MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The corresponding Traffic Profile name." ::= { slapmPolicyMonitorEntry 4 } slapmPolicyMonitorControl OBJECT-TYPE SYNTAX BITS { monitorMinRate(0), monitorMaxRate(1), monitorMaxDelay(2), enableAggregateTraps(3), enableSubcomponentTraps(4), monitorSubcomponents(5) } MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The value of this object determines the type and level of monitoring that is applied to a policy/profile. The value of this object can't be changed once the table entry that it is a part of is activated via a slapmPolicyMonitorRowStatus transition to active state. monitorMinRate(0) - Monitor minimum transfer rate. monitorMaxRate(1) - Monitor maximum transfer rate. monitorMaxDelay(2) - Monitor maximum delay. enableAggregateTraps(3) - The enableAggregateTraps(3) BITS setting enables notification generation when monitoring a policy traffic profile as an aggregate using the values in the corresponding slapmPolicyStatsEntry. By default this function is not enabled. enableSubcomponentTraps(4) - This BITS setting enables notification generation when monitoring all subcomponents that are mapped to an corresponding slapmPolicyStatsEntry. By default this function is not enabled. monitorSubcomponents(5) - This BITS setting enables monitoring of each subcomponent (typically a TCP connection or UDP listener) individually." DEFVAL { { monitorMinRate, monitorMaxRate, monitorMaxDelay } } ::= { slapmPolicyMonitorEntry 5 } slapmPolicyMonitorStatus OBJECT-TYPE SYNTAX SlapmStatus MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The value of this object indicates when a monitored value has not meet a threshold or isn't meeting the defined service level. The SlapmStatus TEXTUAL-CONVENTION defines two levels of not meeting a threshold. The first set: slaMinInRateNotAchieved(0), slaMaxInRateExceeded(1), slaMaxDelayExceeded(2), slaMinOutRateNotAchieved(3), slaMaxOutRateExceeded(4) are used to indicate when the SLA as an aggregate is not meeting a threshold while the second set: monitorMinInRateNotAchieved(5), monitorMaxInRateExceeded(6), monitorMaxDelayExceeded(7), monitorMinOutRateNotAchieved(8), monitorMaxOutRateExceeded(9) indicate that at least one subcomponent is not meeting a threshold." ::= { slapmPolicyMonitorEntry 6 } slapmPolicyMonitorInterval OBJECT-TYPE SYNTAX Integer32 (15..86400) -- 15 second min, 24 hour max UNITS "seconds" MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The number of seconds that defines the sample period." DEFVAL {20} -- 20 seconds ::= { slapmPolicyMonitorEntry 7 } slapmPolicyMonitorIntTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The timestamp for when the last interval ended." DEFVAL { '0000000000000000'H } ::= { slapmPolicyMonitorEntry 8 } slapmPolicyMonitorCurrentInRate OBJECT-TYPE SYNTAX Gauge32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Using the value of the corresponding slapmPolicyMonitorInterval, slapmPolicyStatsInOctets is sampled and then divided by slapmPolicyMonitorInterval to determine the current in transfer rate." ::= { slapmPolicyMonitorEntry 9 } slapmPolicyMonitorCurrentOutRate OBJECT-TYPE SYNTAX Gauge32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Using the value of the corresponding slapmPolicyMonitorInterval, slapmPolicyStatsOutOctets is sampled and then divided by slapmPolicyMonitorInterval to determine the current out transfer rate." ::= { slapmPolicyMonitorEntry 10 } slapmPolicyMonitorMinRateLow OBJECT-TYPE SYNTAX Integer32 UNITS "kilobits per second" MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The threshold for generating a slapmMonitoredEventNotAchieved notification, signalling that a monitored minimum transfer rate has not been meet. A slapmMonitoredEventNotAchieved notification is not generated again for an slapmPolicyMonitorEntry until the minimum transfer rate exceeds slapmPolicyMonitorMinRateHigh (a slapmMonitoredEventOkay notification is then transmitted) and then fails below slapmPolicyMonitorMinRateLow. This behavior reduces the slapmMonitoredEventNotAchieved notifications that are transmitted. A value of zero for this object is returned when the slapmPolicyMonitorControl monitorMinRate(0) is not enabled. When enabled the default value for this object is the min rate value specified in the associated action definition minus 10%. If the action definition doesn't have a min rate defined then there is no default for this object and a value MUST be specified prior to activating this entry when monitorMinRate(0) is selected. Note: The corresponding slapmPolicyMonitorControl BITS setting, enableAggregateTraps(3), MUST be selected in order for any notification relating to this entry to potentially be generated." ::= { slapmPolicyMonitorEntry 11 } slapmPolicyMonitorMinRateHigh OBJECT-TYPE SYNTAX Integer32 UNITS "kilobits per second" MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The threshold for generating a slapmMonitoredEventOkay notification, signalling that a monitored minimum transfer rate has increased to an acceptable level. A value of zero for this object is returned when the slapmPolicyMonitorControl monitorMinRate(0) is not enabled. When enabled the default value for this object is the min rate value specified in the associated action definition plus 10%. If the action definition doesn't have a min rate defined then there is no default for this object and a value MUST be specified prior to activating this entry when monitorMinRate(0) is selected. Note: The corresponding slapmPolicyMonitorControl BITS setting, enableAggregateTraps(3), MUST be selected in order for any notification relating to this entry to potentially be generated." ::= { slapmPolicyMonitorEntry 12 } slapmPolicyMonitorMaxRateHigh OBJECT-TYPE SYNTAX Integer32 UNITS "kilobits per second" MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The threshold for generating a slapmMonitoredEventNotAchieved notification, signalling that a monitored maximum transfer rate has been exceeded. A slapmMonitoredEventNotAchieved notification is not generated again for an slapmPolicyMonitorEntry until the maximum transfer rate fails below slapmPolicyMonitorMaxRateLow (a slapmMonitoredEventOkay notification is then transmitted) and then raises above slapmPolicyMonitorMaxRateHigh. This behavior reduces the slapmMonitoredEventNotAchieved notifications that are transmitted. A value of zero for this object is returned when the slapmPolicyMonitorControl monitorMaxRate(1) is not enabled. When enabled the default value for this object is the max rate value specified in the associated action definition plus 10%. If the action definition doesn't have a max rate defined then there is no default for this object and a value MUST be specified prior to activating this entry when monitorMaxRate(1) is selected. Note: The corresponding slapmPolicyMonitorControl BITS setting, enableAggregateTraps(3), MUST be selected in order for any notification relating to this entry to potentially be generated." ::= { slapmPolicyMonitorEntry 13 } slapmPolicyMonitorMaxRateLow OBJECT-TYPE SYNTAX Integer32 UNITS "kilobits per second" MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The threshold for generating a slapmMonitoredEventOkay notification, signalling that a monitored maximum transfer rate has fallen to an acceptable level. A value of zero for this object is returned when the slapmPolicyMonitorControl monitorMaxRate(1) is not enabled. When enabled the default value for this object is the max rate value specified in the associated action definition minus 10%. If the action definition doesn't have a max rate defined then there is no default for this object and a value MUST be specified prior to activating this entry when monitorMaxRate(1) is selected. Note: The corresponding slapmPolicyMonitorControl BITS setting, enableAggregateTraps(3), MUST be selected in order for any notification relating to this entry to potentially be generated." ::= { slapmPolicyMonitorEntry 14 } slapmPolicyMonitorMaxDelayHigh OBJECT-TYPE SYNTAX Integer32 UNITS "milliseconds" MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The threshold for generating a slapmMonitoredEventNotAchieved notification, signalling that a monitored maximum delay rate has been exceeded. A slapmMonitoredEventNotAchieved notification is not generated again for an slapmPolicyMonitorEntry until the maximum delay rate falls below slapmPolicyMonitorMaxDelayLow (a slapmMonitoredEventOkay notification is then transmitted) and raises above slapmPolicyMonitorMaxDelayHigh. This behavior reduces the slapmMonitoredEventNotAchieved notifications that are transmitted. A value of zero for this object is returned when the slapmPolicyMonitorControl monitorMaxDelay(4) is not enabled. When enabled the default value for this object is the max delay value specified in the associated action definition plus 10%. If the action definition doesn't have a max delay defined then there is no default for this object and a value MUST be specified prior to activating this entry when monitorMaxDelay(4) is selected. Note: The corresponding slapmPolicyMonitorControl BITS setting, enableAggregateTraps(3), MUST be selected in order for any notification relating to this entry to potentially be generated." ::= { slapmPolicyMonitorEntry 15 } slapmPolicyMonitorMaxDelayLow OBJECT-TYPE SYNTAX Integer32 UNITS "milliseconds" MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The threshold for generating a slapmMonitoredEventOkay notification, signalling that a monitored maximum delay rate has fallen to an acceptable level. A value of zero for this object is returned when the slapmPolicyMonitorControl monitorMaxDelay(4) is not enabled. When enabled the default value for this object is the max delay value specified in the associated action definition minus 10%. If the action definition doesn't have a max delay defined then there is no default for this object and a value MUST be specified prior to activating this entry when monitorMaxDelay(4) is selected. Note: The corresponding slapmPolicyMonitorControl BITS setting, enableAggregateTraps(3), MUST be selected in order for any notification relating to this entry to potentially be generated." ::= { slapmPolicyMonitorEntry 16 } slapmPolicyMonitorMinInRateNotAchieves OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of times that a minimum transfer in rate was not achieved." ::= { slapmPolicyMonitorEntry 17 } slapmPolicyMonitorMaxInRateExceeds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of times that a maximum transfer in rate was exceeded." ::= { slapmPolicyMonitorEntry 18 } slapmPolicyMonitorMaxDelayExceeds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of times that a maximum delay in rate was exceeded." ::= { slapmPolicyMonitorEntry 19 } slapmPolicyMonitorMinOutRateNotAchieves OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of times that a minimum transfer out rate was not achieved." ::= { slapmPolicyMonitorEntry 20 } slapmPolicyMonitorMaxOutRateExceeds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of times that a maximum transfer out rate was exceeded." ::= { slapmPolicyMonitorEntry 21 } slapmPolicyMonitorCurrentDelayRate OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The current delay rate for this entry. This is calculated by taking the average of the TCP round trip times for all associating slapmSubcomponentTable entries within a interval." ::= { slapmPolicyMonitorEntry 22 } slapmPolicyMonitorRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This object allows entries to be created and deleted in the slapmPolicyMonitorTable. An entry in this table is deleted by setting this object to destroy(6). Removal of a corresponding (same policy and traffic profile names) slapmPolicyStatsEntry has the side effect of the automatic deletion an entry in this table." ::= { slapmPolicyMonitorEntry 23 } -- Subcomponent Table slapmSubcomponentTable OBJECT-TYPE SYNTAX SEQUENCE OF SlapmSubcomponentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines a table to provide information on the individually components that are mapped to a policy rule (or old traffic profile). The indexing for this table is designed to support the use of an SNMP GET-NEXT operation using only the remote address and remote port as a way for a management station to retrieve the table entries relating to a particular client." ::= { slapmTableObjects 3 } slapmSubcomponentEntry OBJECT-TYPE SYNTAX SlapmSubcomponentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Describes a particular subcomponent entry. This table does not have an OwnerIndex as part of its indexing since this table's contents is intended to span multiple users." INDEX { slapmSubcomponentRemAddress, slapmSubcomponentRemPort, slapmSubcomponentLocalAddress, slapmSubcomponentLocalPort } ::= { slapmSubcomponentTable 1 } SlapmSubcomponentEntry ::= SEQUENCE { slapmSubcomponentRemAddress OCTET STRING, slapmSubcomponentRemPort Integer32, slapmSubcomponentLocalAddress OCTET STRING, slapmSubcomponentLocalPort Integer32, slapmSubcomponentProtocol INTEGER, slapmSubcomponentSystemAddress OCTET STRING, slapmSubcomponentPolicyName SlapmNameType, slapmSubcomponentTrafficProfileName SlapmNameType, slapmSubcomponentLastActivity DateAndTime, slapmSubcomponentInOctets Counter32, slapmSubcomponentOutOctets Counter32, slapmSubcomponentTcpOutBufferedOctets Counter32, slapmSubcomponentTcpInBufferedOctets Counter32, slapmSubcomponentTcpReXmts Counter32, slapmSubcomponentTcpRoundTripTime Integer32, slapmSubcomponentTcpRoundTripVariance Integer32, slapmSubcomponentInPdus Counter32, slapmSubcomponentOutPdus Counter32, slapmSubcomponentApplName SnmpAdminString, slapmSubcomponentMonitorStatus SlapmStatus, slapmSubcomponentMonitorIntTime DateAndTime, slapmSubcomponentMonitorCurrentInRate Gauge32, slapmSubcomponentMonitorCurrentOutRate Gauge32, slapmSubcomponentPolicyRuleIndex Unsigned32 } slapmSubcomponentRemAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0 | 4 | 16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicate the remote address of a subcomponent. A remote address can be either an ipv4 address in which case 4 octets are required or as an ipv6 address that requires 16 octets. The value of this subidentifier is a zero length octet string when this entry relates to a UDP listener." ::= { slapmSubcomponentEntry 1 } slapmSubcomponentRemPort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicate the remote port of a subcomponent. The value of this subidentifier is 0 when this entry relates to a UDP listener." ::= { slapmSubcomponentEntry 2 } slapmSubcomponentLocalAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4 | 16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicate the local address of a subcomponent. A local address can be either an ipv4 address in which case 4 octets are required or as an ipv6 address that requires 16 octets." ::= { slapmSubcomponentEntry 3 } slapmSubcomponentLocalPort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicate the local port of a subcomponent." ::= { slapmSubcomponentEntry 4 } slapmSubcomponentProtocol OBJECT-TYPE SYNTAX INTEGER { udpListener(1), tcpConnection(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the protocol in use that identifies the type of subcomponent." ::= { slapmSubcomponentEntry 5 } slapmSubcomponentSystemAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0 | 4 | 16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Address of a system that an Policy definition relates to. A zero length octet string can be used to indicate that only a single system is being represented. Otherwise, the length of the octet string should be 4 for an ipv4 address and 16 for an ipv6 address." ::= { slapmSubcomponentEntry 6 } slapmSubcomponentPolicyName OBJECT-TYPE SYNTAX SlapmNameType MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Policy name that this entry relates to. This object, along with slapmSubcomponentTrafficProfileName, have been replaced with the use of an unsigned integer index that is mapped to an slapmPolicyNameEntry to actually identify policy naming." ::= { slapmSubcomponentEntry 7 } slapmSubcomponentTrafficProfileName OBJECT-TYPE SYNTAX SlapmNameType MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The corresponding traffic profile name. This object, along with slapmSubcomponentProfileName, have been replaced with the use of an unsigned integer index that is mapped to an slapmPolicyNameEntry to actually identify policy naming." ::= { slapmSubcomponentEntry 8 } slapmSubcomponentLastActivity OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and timestamp of when this entry was last used." DEFVAL { '0000000000000000'H } ::= { slapmSubcomponentEntry 9 } slapmSubcomponentInOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets received from IP for this connection." ::= { slapmSubcomponentEntry 10 } slapmSubcomponentOutOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets sent to IP for this connection." ::= { slapmSubcomponentEntry 11 } slapmSubcomponentTcpOutBufferedOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of outgoing octets buffered. The value of this object is zero when the entry is not for a TCP connection." ::= { slapmSubcomponentEntry 12 } slapmSubcomponentTcpInBufferedOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of incoming octets buffered. The value of this object is zero when the entry is not for a TCP connection." ::= { slapmSubcomponentEntry 13 } slapmSubcomponentTcpReXmts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of retransmissions. The value of this object is zero when the entry is not for a TCP connection." ::= { slapmSubcomponentEntry 14 } slapmSubcomponentTcpRoundTripTime OBJECT-TYPE SYNTAX Integer32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of time that has elapsed, measured in milliseconds, from when the last TCP segment was transmitted by the TCP Stack until the ACK was received. The value of this object is zero when the entry is not for a TCP connection." ::= { slapmSubcomponentEntry 15 } slapmSubcomponentTcpRoundTripVariance OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Round trip time variance. The value of this object is zero when the entry is not for a TCP connection." ::= { slapmSubcomponentEntry 16 } slapmSubcomponentInPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of protocol related data units transferred inbound: slapmSubcomponentProtocol PDU Type udpListener(1) UDP datagrams tcpConnection(2) TCP segments" ::= { slapmSubcomponentEntry 17 } slapmSubcomponentOutPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of protocol related data units transferred outbound: slapmSubcomponentProtocol PDU Type udpListener(1) UDP datagrams tcpConnection(2) TCP segments" ::= { slapmSubcomponentEntry 18 } slapmSubcomponentApplName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The application name associated with this entry if known, otherwise a zero-length octet string is returned as the value of this object." ::= { slapmSubcomponentEntry 19 } slapmSubcomponentMonitorStatus OBJECT-TYPE SYNTAX SlapmStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object indicates when a monitored value has exceeded a threshold or isn't meeting the defined service level. Only the following SlapmStatus BITS setting can be reported here: monitorMinInRateNotAchieved(5), monitorMaxInRateExceeded(6), monitorMaxDelayExceeded(7), monitorMinOutRateNotAchieved(8), monitorMaxOutRateExceeded(9) This object only has meaning when an corresponding slapmPolicyMonitorEntry exists with the slapmPolicyMonitorControl BITS setting monitorSubcomponents(5) enabled." ::= { slapmSubcomponentEntry 20 } slapmSubcomponentMonitorIntTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The timestamp for when the last interval ended. This object only has meaning when an corresponding slapmPRMonEntry (or old slapmPolicyMonitorEntry) exists with the slapmPRMonControl (or slapmPolicyMonitorControl) BITS setting monitorSubcomponents(5) enabled. All of the octets returned when monitoring is not in effect must be zero." DEFVAL { '0000000000000000'H } ::= { slapmSubcomponentEntry 21 } slapmSubcomponentMonitorCurrentInRate OBJECT-TYPE SYNTAX Gauge32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "Using the value of the corresponding slapmPRMonInterval (or slapmPolicyMonitorInterval), slapmSubcomponentStatsInOctets is divided by slapmSubcomponentMonitorInterval to determine the current in transfer rate. This object only has meaning when an corresponding slapmPRMonEntry (or slapmPolicyMonitorEntry) exists with the slapmPRMonControl (or slapmPolicyMonitorControl) BITS setting monitorSubcomponents(5) enabled. The value of this object is zero when monitoring is not in effect." ::= { slapmSubcomponentEntry 22 } slapmSubcomponentMonitorCurrentOutRate OBJECT-TYPE SYNTAX Gauge32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "Using the value of the corresponding slapmPRMonInterval (or slapmPolicyMonitorInterva)l, slapmSubcomponentStatsOutOctets is divided by slapmPRMonInterval (or slapmPolicyMonitorInterval) to determine the current out transfer rate. This object only has meaning when an corresponding slapmPRMonEntry (or slapmPolicyMonitorEntry) exists with the slapmPRMonControl (or slapmPolicyMonitorControl) BITS setting monitorSubcomponents(5) enabled. The value of this object is zero when monitoring is not in effect." ::= { slapmSubcomponentEntry 23 } slapmSubcomponentPolicyRuleIndex OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Points to an slapmPolicyNameEntry when combined with slapmSubcomponentSystemAddress to indicate the policy naming that relates to this entry. A value of 0 for this object MUST be returned when the corresponding slapmSubcomponentEntry has no policy rule associated with it." ::= { slapmSubcomponentEntry 24 } -- Table that maps an unsigned integer index to whatever -- names a policy rule. slapmPolicyNameTable OBJECT-TYPE SYNTAX SEQUENCE OF SlapmPolicyNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provides the mapping between a policy index as a unsigned 32 bit integer and the unique name associated with a policy rule." ::= { slapmTableObjects 4 } slapmPolicyNameEntry OBJECT-TYPE SYNTAX SlapmPolicyNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the slapmPolicyNameTable." INDEX { slapmPolicyNameSystemAddress, slapmPolicyNameIndex } ::= { slapmPolicyNameTable 1 } SlapmPolicyNameEntry ::= SEQUENCE { slapmPolicyNameSystemAddress OCTET STRING, slapmPolicyNameIndex Unsigned32, slapmPolicyNameOfRule SlapmPolicyRuleName } slapmPolicyNameSystemAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0 | 4 | 16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Address of a system that an Policy rule definition relates to. A zero length octet string must be used to indicate that only a single system is being represented. Otherwise, the length of the octet string must be 4 for an ipv4 address or 16 for an ipv6 address." ::= { slapmPolicyNameEntry 1 } slapmPolicyNameIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A locally arbitrary, but unique identifier associated with this table entry. This value is not expected to remain constant across reIPLs." ::= { slapmPolicyNameEntry 2 } slapmPolicyNameOfRule OBJECT-TYPE SYNTAX SlapmPolicyRuleName MAX-ACCESS read-only STATUS current DESCRIPTION "The unique name that identifies a policy rule definition." ::= { slapmPolicyNameEntry 3 } -- Sla Performance Monitoring Policy Rule Statistics Table slapmPolicyRuleStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SlapmPolicyRuleStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provides statistics on a per system and a per policy rule basis." ::= { slapmTableObjects 5 } slapmPolicyRuleStatsEntry OBJECT-TYPE SYNTAX SlapmPolicyRuleStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the slapmPolicyRuleStatsTable. This table defines a set of statistics that is kept on a per system and per policy rule basis. Entries in this table are not created or deleted via SNMP but reflect the set of policy rule definitions known at a system." INDEX { slapmPolicyNameSystemAddress, slapmPolicyNameIndex } ::= { slapmPolicyRuleStatsTable 1 } SlapmPolicyRuleStatsEntry ::= SEQUENCE { slapmPolicyRuleStatsOperStatus INTEGER, slapmPolicyRuleStatsActiveConns Gauge32, slapmPolicyRuleStatsTotalConns Counter32, slapmPolicyRuleStatsLActivated DateAndTime, slapmPolicyRuleStatsLastMapping DateAndTime, slapmPolicyRuleStatsInOctets Counter32, slapmPolicyRuleStatsOutOctets Counter32, slapmPolicyRuleStatsConnLimit Unsigned32, slapmPolicyRuleStatsCountAccepts Counter32, slapmPolicyRuleStatsCountDenies Counter32, slapmPolicyRuleStatsInDiscards Counter32, slapmPolicyRuleStatsOutDiscards Counter32, slapmPolicyRuleStatsInPackets Counter32, slapmPolicyRuleStatsOutPackets Counter32, slapmPolicyRuleStatsInProOctets Counter32, slapmPolicyRuleStatsOutProOctets Counter32, slapmPolicyRuleStatsMinRate Unsigned32, slapmPolicyRuleStatsMaxRate Unsigned32, slapmPolicyRuleStatsMaxDelay Unsigned32, slapmPolicyRuleStatsTotalRsvpFlows Counter32, slapmPolicyRuleStatsActRsvpFlows Gauge32 } slapmPolicyRuleStatsOperStatus OBJECT-TYPE SYNTAX INTEGER { inactive(1), active(2), deleteNeeded(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of a policy entry: inactive(1) - An policy entry was either defined by local system definition or discovered via a directory search but has not been activated (not currently being used). active(2) - Policy entry is being used to affect traffic flows. deleteNeeded(3) - Either though local implementation dependent methods or by discovering that the directory entry corresponding to this table entry no longer exists and slapmPolicyPurgeTime needs to expire before attempting to remove the corresponding slapmPolicyStatsEntry and any dependent slapmPolicyMonitor table entries. Note: a policy rule in a state other than active(2) is not being used to affect traffic flows." ::= { slapmPolicyRuleStatsEntry 1 } slapmPolicyRuleStatsActiveConns OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of active TCP connections that are affected by the corresponding policy entry." ::= { slapmPolicyRuleStatsEntry 2 } slapmPolicyRuleStatsTotalConns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of total TCP connections that are affected by the corresponding policy entry." ::= { slapmPolicyRuleStatsEntry 3 } slapmPolicyRuleStatsLActivated OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The timestamp for when the corresponding policy entry was last activated. The value of this object serves as the discontinuity event indicator when polling entries in this table. The value of this object is updated on transition of slapmPolicyRuleStatsOperStatus into the active(2) state." DEFVAL { '0000000000000000'H } ::= { slapmPolicyRuleStatsEntry 4 } slapmPolicyRuleStatsLastMapping OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The timestamp for when the last time that the associated policy entry was used." DEFVAL { '0000000000000000'H } ::= { slapmPolicyRuleStatsEntry 5 } slapmPolicyRuleStatsInOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets that was received by IP for an entity that map to this entry." ::= { slapmPolicyRuleStatsEntry 6 } slapmPolicyRuleStatsOutOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets that was transmitted by IP for an entity that map to this entry." ::= { slapmPolicyRuleStatsEntry 7 } slapmPolicyRuleStatsConnLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The limit for the number of active TCP connections that are allowed for this policy definition. A value of zero for this object implies that a connection limit has not been specified." ::= { slapmPolicyRuleStatsEntry 8 } slapmPolicyRuleStatsCountAccepts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter is incremented when a policy action's Permission value is set to Accept and a session (TCP connection) is accepted." ::= { slapmPolicyRuleStatsEntry 9 } slapmPolicyRuleStatsCountDenies OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter is incremented when a policy action's Permission value is set to Deny and a session is denied, or when a session (TCP connection) is rejected due to a policy's connection limit (slapmPolicyRuleStatsConnectLimit) being reached." ::= { slapmPolicyRuleStatsEntry 10 } slapmPolicyRuleStatsInDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter counts the number of in octets discarded. This occurs when an error is detected. Examples of this are buffer overflow, checksum error, or bad packet format." ::= { slapmPolicyRuleStatsEntry 11 } slapmPolicyRuleStatsOutDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter counts the number of out octets discarded. Examples of this are buffer overflow, checksum error, or bad packet format." ::= { slapmPolicyRuleStatsEntry 12 } slapmPolicyRuleStatsInPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter counts the number of in packets received that relate to this policy entry from IP." ::= { slapmPolicyRuleStatsEntry 13 } slapmPolicyRuleStatsOutPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter counts the number of out packets sent by IP that relate to this policy entry." ::= { slapmPolicyRuleStatsEntry 14 } slapmPolicyRuleStatsInProOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter counts the number of in octets that are determined to be within profile." ::= { slapmPolicyRuleStatsEntry 15 } slapmPolicyRuleStatsOutProOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter counts the number of out octets that are determined to be within profile." ::= { slapmPolicyRuleStatsEntry 16 } slapmPolicyRuleStatsMinRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "Kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum transfer rate defined for this entry." ::= { slapmPolicyRuleStatsEntry 17 } slapmPolicyRuleStatsMaxRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "Kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum transfer rate defined for this entry." ::= { slapmPolicyRuleStatsEntry 18 } slapmPolicyRuleStatsMaxDelay OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum delay defined for this entry." ::= { slapmPolicyRuleStatsEntry 19 } slapmPolicyRuleStatsTotalRsvpFlows OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of RSVP flows that have be activated." ::= { slapmPolicyRuleStatsEntry 20 } slapmPolicyRuleStatsActRsvpFlows OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of active RSVP flows." ::= { slapmPolicyRuleStatsEntry 21 } -- SLA Performance Monitoring Policy Rule Monitor Table slapmPRMonTable OBJECT-TYPE SYNTAX SEQUENCE OF SlapmPRMonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provides a method of monitoring policies and their effect at a system." ::= { slapmTableObjects 6 } slapmPRMonEntry OBJECT-TYPE SYNTAX SlapmPRMonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the slapmPRMonTable. This table defines which policies should be monitored on a per policy rule basis. An attempt to set any read-create object defined within an slapmPRMonEntry while the value of slapmPRMonRowStatus is active(1) will result in an inconsistentValue error." INDEX { slapmPRMonOwnerIndex, slapmPRMonSystemAddress, slapmPRMonIndex } ::= { slapmPRMonTable 1 } SlapmPRMonEntry ::= SEQUENCE { slapmPRMonOwnerIndex SnmpAdminString, slapmPRMonSystemAddress OCTET STRING, slapmPRMonIndex Unsigned32, slapmPRMonControl BITS, slapmPRMonStatus SlapmStatus, slapmPRMonInterval Unsigned32, slapmPRMonIntTime DateAndTime, slapmPRMonCurrentInRate Gauge32, slapmPRMonCurrentOutRate Gauge32, slapmPRMonMinRateLow Unsigned32, slapmPRMonMinRateHigh Unsigned32, slapmPRMonMaxRateHigh Unsigned32, slapmPRMonMaxRateLow Unsigned32, slapmPRMonMaxDelayHigh Unsigned32, slapmPRMonMaxDelayLow Unsigned32, slapmPRMonMinInRateNotAchieves Counter32, slapmPRMonMaxInRateExceeds Counter32, slapmPRMonMaxDelayExceeds Counter32, slapmPRMonMinOutRateNotAchieves Counter32, slapmPRMonMaxOutRateExceeds Counter32, slapmPRMonCurrentDelayRate Gauge32, slapmPRMonRowStatus RowStatus } slapmPRMonOwnerIndex OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "To facilitate the provisioning of access control by a security administrator using the View-Based Access Control Model (RFC 2575, VACM) for tables in which multiple users may need to independently create or modify entries, the initial index is used as an 'owner index'. Such an initial index has a syntax of SnmpAdminString, and can thus be trivially mapped to a securityName or groupName as defined in VACM, in accordance with a security policy. All entries in that table belonging to a particular user will have the same value for this initial index. For a given user's entries in a particular table, the object identifiers for the information in these entries will have the same subidentifiers (except for the 'column' subidentifier) up to the end of the encoded owner index. To configure VACM to permit access to this portion of the table, one would create vacmViewTreeFamilyTable entries with the value of vacmViewTreeFamilySubtree including the owner index portion, and vacmViewTreeFamilyMask 'wildcarding' the column subidentifier. More elaborate configurations are possible." ::= { slapmPRMonEntry 1 } slapmPRMonSystemAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0 | 4 | 16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Address of a system that an Policy definition relates to. A zero length octet string can be used to indicate that only a single system is being represented. Otherwise, the length of the octet string should be 4 for an ipv4 address and 16 for an ipv6 address." ::= { slapmPRMonEntry 2 } slapmPRMonIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An slapmPolicyNameTable index, slapmPolicyNameIndex, that points to the unique name associated with a policy rule definition." ::= { slapmPRMonEntry 3 } slapmPRMonControl OBJECT-TYPE SYNTAX BITS { monitorMinRate(0), monitorMaxRate(1), monitorMaxDelay(2), enableAggregateTraps(3), enableSubcomponentTraps(4), monitorSubcomponents(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object determines the type and level of monitoring that is applied to a policy rule. The value of this object can't be changed once the table entry that it is a part of is activated via a slapmPRMonRowStatus transition to active state. monitorMinRate(0) - Monitor minimum transfer rate. monitorMaxRate(1) - Monitor maximum transfer rate. monitorMaxDelay(2) - Monitor maximum delay. enableAggregateTraps(3) - The enableAggregateTraps(3) BITS setting enables notification generation when monitoring a policy rule as an aggregate using the values in the corresponding slapmPRMonStatsEntry. By default this function is not enabled. enableSubcomponentTraps(4) - This BITS setting enables notification generation when monitoring all subcomponents that are mapped to an corresponding slapmPRMonStatsEntry. By default this function is not enabled. monitorSubcomponents(5) - This BITS setting enables monitoring of each subcomponent (typically a TCP connection or UDP listener) individually." DEFVAL { { monitorMinRate, monitorMaxRate, monitorMaxDelay } } ::= { slapmPRMonEntry 4 } slapmPRMonStatus OBJECT-TYPE SYNTAX SlapmStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object indicates when a monitored value has not meet a threshold or isn't meeting the defined service level. The SlapmStatus TEXTUAL-CONVENTION defines two levels of not meeting a threshold. The first set: slaMinInRateNotAchieved(0), slaMaxInRateExceeded(1), slaMaxDelayExceeded(2), slaMinOutRateNotAchieved(3), slaMaxOutRateExceeded(4) are used to indicate when the SLA as an aggregate is not meeting a threshold while the second set: monitorMinInRateNotAchieved(5), monitorMaxInRateExceeded(6), monitorMaxDelayExceeded(7), monitorMinOutRateNotAchieved(8), monitorMaxOutRateExceeded(9) indicate that at least one subcomponent is not meeting a threshold." ::= { slapmPRMonEntry 5 } slapmPRMonInterval OBJECT-TYPE SYNTAX Unsigned32 (15..86400) -- 15 second min, 24 hour max UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The number of seconds that defines the sample period." DEFVAL {20} -- 20 seconds ::= { slapmPRMonEntry 6 } slapmPRMonIntTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The timestamp for when the last interval ended." DEFVAL { '0000000000000000'H } ::= { slapmPRMonEntry 7 } slapmPRMonCurrentInRate OBJECT-TYPE SYNTAX Gauge32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "Using the value of the corresponding slapmPRMonInterval, slapmPolicyRuleStatsInOctets is sampled and then divided by slapmPRMonInterval to determine the current in transfer rate." ::= { slapmPRMonEntry 8 } slapmPRMonCurrentOutRate OBJECT-TYPE SYNTAX Gauge32 UNITS "kilobits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "Using the value of the corresponding slapmPolicyMonInterval, slapmPolicyRuleStatsOutOctets is sampled and then divided by slapmPRMonInterval to determine the current out transfer rate." ::= { slapmPRMonEntry 9 } slapmPRMonMinRateLow OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The threshold for generating a slapmPolicyRuleMonNotOkay notification, signalling that a monitored minimum transfer rate has not been meet. A slapmPolicyRuleMonNotOkay notification is not generated again for an slapmPRMonEntry until the minimum transfer rate exceeds slapmPRMonMinRateHigh (a slapmPolicyRuleMonOkay notification is then transmitted) and then fails below slapmPRMonMinRateLow. This behavior reduces the slapmPolicyRuleMonNotOkay notifications that are transmitted. A value of zero for this object is returned when the slapmPRMonControl monitorMinRate(0) is not enabled. When enabled the default value for this object is the min rate value specified in the associated action definition minus 10%. If the action definition doesn't have a min rate defined then there is no default for this object and a value MUST be specified prior to activating this entry when monitorMinRate(0) is selected. Note: The corresponding slapmPRMonControl BITS setting, enableAggregateTraps(3), MUST be selected in order for any notification relating to this entry to potentially be generated." ::= { slapmPRMonEntry 10 } slapmPRMonMinRateHigh OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The threshold for generating a slapmPolicyRuleMonOkay notification, signalling that a monitored minimum transfer rate has increased to an acceptable level. A value of zero for this object is returned when the slapmPRMonControl monitorMinRate(0) is not enabled. When enabled the default value for this object is the min rate value specified in the associated action definition plus 10%. If the action definition doesn't have a min rate defined then there is no default for this object and a value MUST be specified prior to activating this entry when monitorMinRate(0) is selected. Note: The corresponding slapmPRMonControl BITS setting, enableAggregateTraps(3), MUST be selected in order for any notification relating to this entry to potentially be generated." ::= { slapmPRMonEntry 11 } slapmPRMonMaxRateHigh OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The threshold for generating a slapmPolicyRuleMonNotOkay notification, signalling that a monitored maximum transfer rate has been exceeded. A slapmPolicyRuleNotOkay notification is not generated again for an slapmPRMonEntry until the maximum transfer rate fails below slapmPRMonMaxRateLow (a slapmPolicyRuleMonOkay notification is then transmitted) and then raises above slapmPRMonMaxRateHigh. This behavior reduces the slapmPolicyRuleMonNotOkay notifications that are transmitted. A value of zero for this object is returned when the slapmPRMonControl monitorMaxRate(1) is not enabled. When enabled the default value for this object is the max rate value specified in the associated action definition plus 10%. If the action definition doesn't have a max rate defined then there is no default for this object and a value MUST be specified prior to activating this entry when monitorMaxRate(1) is selected. Note: The corresponding slapmPRMonControl BITS setting, enableAggregateTraps(3), MUST be selected in order for any notification relating to this entry to potentially be generated." ::= { slapmPRMonEntry 12 } slapmPRMonMaxRateLow OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The threshold for generating a slapmPolicyRuleMonOkay notification, signalling that a monitored maximum transfer rate has fallen to an acceptable level. A value of zero for this object is returned when the slapmPRMonControl monitorMaxRate(1) is not enabled. When enabled the default value for this object is the max rate value specified in the associated action definition minus 10%. If the action definition doesn't have a max rate defined then there is no default for this object and a value MUST be specified prior to activating this entry when monitorMaxRate(1) is selected. Note: The corresponding slapmPRMonControl BITS setting, enableAggregateTraps(3), MUST be selected in order for any notification relating to this entry to potentially be generated." ::= { slapmPRMonEntry 13 } slapmPRMonMaxDelayHigh OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The threshold for generating a slapmPolicyRuleMonNotOkay notification, signalling that a monitored maximum delay rate has been exceeded. A slapmPolicyRuleMonNotOkay notification is not generated again for an slapmPRMonEntry until the maximum delay rate falls below slapmPRMonMaxDelayLow (a slapmPolicyRuleMonOkay notification is then transmitted) and raises above slapmPRMonMaxDelayHigh. This behavior reduces the slapmPolicyRuleMonNotOkay notifications that are transmitted. A value of zero for this object is returned when the slapmPRMonControl monitorMaxDelay(4) is not enabled. When enabled the default value for this object is the max delay value specified in the associated action definition plus 10%. If the action definition doesn't have a max delay defined then there is no default for this object and a value MUST be specified prior to activating this entry when monitorMaxDelay(4) is selected. Note: The corresponding slapmPRMonControl BITS setting, enableAggregateTraps(3), MUST be selected in order for any notification relating to this entry to potentially be generated." ::= { slapmPRMonEntry 14 } slapmPRMonMaxDelayLow OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The threshold for generating a slapmPolicyRuleMonOkay notification, signalling that a monitored maximum delay rate has fallen to an acceptable level. A value of zero for this object is returned when the slapmPRMonControl monitorMaxDelay(4) is not enabled. When enabled the default value for this object is the max delay value specified in the associated action definition minus 10%. If the action definition doesn't have a max delay defined then there is no default for this object and a value MUST be specified prior to activating this entry when monitorMaxDelay(4) is selected. Note: The corresponding slapmPRMonControl BITS setting, enableAggregateTraps(3), MUST be selected in order for any notification relating to this entry to potentially be generated." ::= { slapmPRMonEntry 15 } slapmPRMonMinInRateNotAchieves OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times that a minimum transfer in rate was not achieved." ::= { slapmPRMonEntry 16 } slapmPRMonMaxInRateExceeds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times that a maximum transfer in rate was exceeded." ::= { slapmPRMonEntry 17 } slapmPRMonMaxDelayExceeds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times that a maximum delay in rate was exceeded." ::= { slapmPRMonEntry 18 } slapmPRMonMinOutRateNotAchieves OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times that a minimum transfer out rate was not achieved." ::= { slapmPRMonEntry 19 } slapmPRMonMaxOutRateExceeds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times that a maximum transfer out rate was exceeded." ::= { slapmPRMonEntry 20 } slapmPRMonCurrentDelayRate OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The current delay rate for this entry. This is calculated by taking the average of the TCP round trip times for all associating slapmSubcomponentTable entries within a interval." ::= { slapmPRMonEntry 21 } slapmPRMonRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows entries to be created and deleted in the slapmPRMonTable. An entry in this table is deleted by setting this object to destroy(6). Removal of an corresponding (same policy index) slapmPolicyRuleStatsEntry has the side effect of the automatic deletion an entry in this table. Note that an attempt to set any read-create object defined within an slapmPRMonEntry while the value of slapmPRMonRowStatus is active(1) will result in an inconsistentValue error." ::= { slapmPRMonEntry 22 } -- Notifications slapmMonitoredEventNotAchieved NOTIFICATION-TYPE OBJECTS { slapmPolicyMonitorIntTime, slapmPolicyMonitorControl, slapmPolicyMonitorStatus, slapmPolicyMonitorStatus, slapmPolicyMonitorCurrentInRate, slapmPolicyMonitorCurrentOutRate, slapmPolicyMonitorCurrentDelayRate } STATUS deprecated DESCRIPTION "This notification is generated when an monitored event is not achieved with respect to threshold. This applies only towards monitoring a policy traffic profile as an aggregate via an associating slapmPolicyStatsEntry. The value of slapmPolicyMonitorControl can be examined to determine what is being monitored. The first slapmPolicyMonitorStatus value supplies the current monitor status while the 2nd value supplies the previous status. Note: The corresponding slapmPolicyMonitorControl BITS setting, enableAggregateTraps(3), MUST be selected in order for this notification to potentially be generated." ::= { slapmNotifications 1 } slapmMonitoredEventOkay NOTIFICATION-TYPE OBJECTS { slapmPolicyMonitorIntTime, slapmPolicyMonitorControl, slapmPolicyMonitorStatus, slapmPolicyMonitorStatus, slapmPolicyMonitorCurrentInRate, slapmPolicyMonitorCurrentOutRate, slapmPolicyMonitorCurrentDelayRate } STATUS deprecated DESCRIPTION "This notification is generated when a monitored event has improved to an acceptable level. This applies only towards monitoring a policy traffic profile as an aggregate via an associating slapmPolicyStatsEntry. The value of slapmPolicyMonitorControl can be examined to determine what is being monitored. The first slapmPolicyMonitorStatus value supplies the current monitor status while the 2nd value supplies the previous status. Note: The corresponding slapmPolicyMonitorControl BITS setting, enableAggregateTraps(3), MUST be selected in order for this notification to potentially be generated." ::= { slapmNotifications 2 } slapmPolicyProfileDeleted NOTIFICATION-TYPE OBJECTS { slapmPolicyStatsActiveConns, slapmPolicyStatsTotalConns, slapmPolicyStatsFirstActivated, slapmPolicyStatsLastMapping, slapmPolicyStatsInOctets, slapmPolicyStatsOutOctets, slapmPolicyStatsConnectionLimit, slapmPolicyStatsCountAccepts, slapmPolicyStatsCountDenies, slapmPolicyStatsInDiscards, slapmPolicyStatsOutDiscards, slapmPolicyStatsInPackets, slapmPolicyStatsOutPackets, slapmPolicyStatsInProfileOctets, slapmPolicyStatsOutProfileOctets, slapmPolicyStatsMinRate, slapmPolicyStatsMaxRate, slapmPolicyStatsMaxDelay } STATUS deprecated DESCRIPTION "A slapmPolicyDeleted notification is sent when a slapmPolicyStatsEntry is deleted if the value of slapmPolicyTrapEnable is enabled(1)." ::= { slapmNotifications 3 } slapmPolicyMonitorDeleted NOTIFICATION-TYPE OBJECTS { slapmPolicyMonitorStatus, slapmPolicyMonitorInterval, slapmPolicyMonitorIntTime, slapmPolicyMonitorCurrentInRate, slapmPolicyMonitorCurrentOutRate, slapmPolicyMonitorCurrentDelayRate, slapmPolicyMonitorMinRateLow, slapmPolicyMonitorMinRateHigh, slapmPolicyMonitorMaxRateHigh, slapmPolicyMonitorMaxRateLow, slapmPolicyMonitorMaxDelayHigh, slapmPolicyMonitorMaxDelayLow, slapmPolicyMonitorMinInRateNotAchieves, slapmPolicyMonitorMaxInRateExceeds, slapmPolicyMonitorMaxDelayExceeds, slapmPolicyMonitorMinOutRateNotAchieves, slapmPolicyMonitorMaxOutRateExceeds } STATUS deprecated DESCRIPTION "A slapmPolicyMonitorDeleted notification is sent when a slapmPolicyMonitorEntry is deleted if the value of slapmPolicyTrapEnable is enabled(1)." ::= { slapmNotifications 4 } slapmSubcomponentMonitoredEventNotAchieved NOTIFICATION-TYPE OBJECTS { slapmSubcomponentSystemAddress, slapmSubcomponentPolicyName, slapmSubcomponentTrafficProfileName, slapmSubcomponentMonitorStatus, slapmSubcomponentMonitorStatus, slapmSubcomponentMonitorIntTime, slapmSubcomponentMonitorCurrentInRate, slapmSubcomponentMonitorCurrentOutRate, slapmSubcomponentTcpRoundTripTime } STATUS deprecated DESCRIPTION "This notification is generated when a monitored value does not achieved a threshold specification. This applies only towards monitoring the individual components of a policy traffic profile. The value of the corresponding slapmPolicyMonitorControl can be examined to determine what is being monitored. The first slapmSubcomponentMonitorStatus value supplies the current monitor status while the 2nd value supplies the previous status. Note: The corresponding slapmPolicyMonitorControl BITS setting, enableSubcomponentTraps(4), MUST be selected in order for this notification to potentially be generated." ::= { slapmNotifications 5 } slapmSubcomponentMonitoredEventOkay NOTIFICATION-TYPE OBJECTS { slapmSubcomponentSystemAddress, slapmSubcomponentPolicyName, slapmSubcomponentTrafficProfileName, slapmSubcomponentMonitorStatus, slapmSubcomponentMonitorStatus, slapmSubcomponentMonitorIntTime, slapmSubcomponentMonitorCurrentInRate, slapmSubcomponentMonitorCurrentOutRate, slapmSubcomponentTcpRoundTripTime } STATUS deprecated DESCRIPTION "This notification is generated when a monitored value has reached an acceptable level. Note: The corresponding slapmPolicyMonitorControl BITS setting, enableSubcomponentTraps(3), MUST be selected in order for this notification to potentially be generated." ::= { slapmNotifications 6 } slapmPolicyRuleMonNotOkay NOTIFICATION-TYPE OBJECTS { slapmPRMonIntTime, slapmPRMonControl, slapmPRMonStatus, slapmPRMonStatus, slapmPRMonCurrentInRate, slapmPRMonCurrentOutRate, slapmPRMonCurrentDelayRate } STATUS current DESCRIPTION "This notification is generated when an monitored event is not achieved with respect to a threshold. This applies only towards monitoring a policy rule as an aggregate via an associating slapmPolicyRuleStatsEntry. The value of slapmPRMonControl can be examined to determine what is being monitored. The first slapmPRMonStatus value supplies the current monitor status while the 2nd value supplies the previous status. Note: The corresponding slapmPRMonControl BITS setting, enableAggregateTraps(3), MUST be selected in order for this notification to potentially be generated." ::= { slapmNotifications 7 } slapmPolicyRuleMonOkay NOTIFICATION-TYPE OBJECTS { slapmPRMonIntTime, slapmPRMonControl, slapmPRMonStatus, slapmPRMonStatus, slapmPRMonCurrentInRate, slapmPRMonCurrentOutRate, slapmPRMonCurrentDelayRate } STATUS current DESCRIPTION "This notification is generated when a monitored event has improved to an acceptable level. This applies only towards monitoring a policy rule as an aggregate via an associating slapmPolicyRuleStatsEntry. The value of slapmPRMonControl can be examined to determine what is being monitored. The first slapmPRMonStatus value supplies the current monitor status while the 2nd value supplies the previous status. Note: The corresponding slapmPRMonControl BITS setting, enableAggregateTraps(3), MUST be selected in order for this notification to potentially be generated." ::= { slapmNotifications 8 } slapmPolicyRuleDeleted NOTIFICATION-TYPE OBJECTS { slapmPolicyRuleStatsActiveConns, slapmPolicyRuleStatsTotalConns, slapmPolicyRuleStatsLActivated, slapmPolicyRuleStatsLastMapping, slapmPolicyRuleStatsInOctets, slapmPolicyRuleStatsOutOctets, slapmPolicyRuleStatsConnLimit, slapmPolicyRuleStatsCountAccepts, slapmPolicyRuleStatsCountDenies, slapmPolicyRuleStatsInDiscards, slapmPolicyRuleStatsOutDiscards, slapmPolicyRuleStatsInPackets, slapmPolicyRuleStatsOutPackets, slapmPolicyRuleStatsInProOctets, slapmPolicyRuleStatsOutProOctets, slapmPolicyRuleStatsMinRate, slapmPolicyRuleStatsMaxRate, slapmPolicyRuleStatsMaxDelay, slapmPolicyRuleStatsTotalRsvpFlows, slapmPolicyRuleStatsActRsvpFlows } STATUS current DESCRIPTION "A slapmPolicyRuleDeleted notification is sent when a slapmPolicyRuleStatsEntry is deleted if the value of slapmPolicyTrapEnable is enabled(1)." ::= { slapmNotifications 9 } slapmPolicyRuleMonDeleted NOTIFICATION-TYPE OBJECTS { slapmPRMonControl, slapmPRMonStatus, slapmPRMonInterval, slapmPRMonIntTime, slapmPRMonCurrentInRate, slapmPRMonCurrentOutRate, slapmPRMonCurrentDelayRate, slapmPRMonMinRateLow, slapmPRMonMinRateHigh, slapmPRMonMaxRateHigh, slapmPRMonMaxRateLow, slapmPRMonMaxDelayHigh, slapmPRMonMaxDelayLow, slapmPRMonMinInRateNotAchieves, slapmPRMonMaxInRateExceeds, slapmPRMonMaxDelayExceeds, slapmPRMonMinOutRateNotAchieves, slapmPRMonMaxOutRateExceeds } STATUS current DESCRIPTION "A slapmPolicyRuleMonDeleted notification is sent when a slapmPRMonEntry is deleted if the value of slapmPolicyTrapEnable is enabled(1)." ::= { slapmNotifications 10 } slapmSubcMonitorNotOkay NOTIFICATION-TYPE OBJECTS { slapmSubcomponentSystemAddress, slapmSubcomponentPolicyRuleIndex, slapmPRMonControl, slapmSubcomponentMonitorStatus, slapmSubcomponentMonitorStatus, slapmSubcomponentMonitorIntTime, slapmSubcomponentMonitorCurrentInRate, slapmSubcomponentMonitorCurrentOutRate, slapmSubcomponentTcpRoundTripTime } STATUS current DESCRIPTION "This notification is generated when a monitored value does not achieved a threshold specification. This applies only towards monitoring the individual components of a policy rule. The value of the corresponding slapmPRMonControl can be examined to determine what is being monitored. The first slapmSubcomponentMonitorStatus value supplies the current monitor status while the 2nd value supplies the previous status. Note: The corresponding slapmPRMonControl BITS setting, enableSubcomponentTraps(4), MUST be selected in order for this notification to potentially be generated." ::= { slapmNotifications 11 } slapmSubcMonitorOkay NOTIFICATION-TYPE OBJECTS { slapmSubcomponentSystemAddress, slapmSubcomponentPolicyRuleIndex, slapmPRMonControl, slapmSubcomponentMonitorStatus, slapmSubcomponentMonitorStatus, slapmSubcomponentMonitorIntTime, slapmSubcomponentMonitorCurrentInRate, slapmSubcomponentMonitorCurrentOutRate, slapmSubcomponentTcpRoundTripTime } STATUS current DESCRIPTION "This notification is generated when a monitored value has reached an acceptable level. Note: The corresponding slapmPRMonControl BITS setting, enableSubcomponentTraps(3), MUST be selected in order for this notification to potentially be generated." ::= { slapmNotifications 12 } -- Conformance information -- Compliance statements slapmCompliances OBJECT IDENTIFIER ::= { slapmConformance 1 } slapmGroups OBJECT IDENTIFIER ::= { slapmConformance 2 } -- Compliance statements slapmCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the SLAPM-MIB." MODULE -- this module MANDATORY-GROUPS { slapmBaseGroup2, slapmNotGroup2 } GROUP slapmEndSystemGroup2 DESCRIPTION "The contents of this group is required by end-system implementations." GROUP slapmEndSystemNotGroup2 DESCRIPTION "The contents of this group is required by end-system implementations." GROUP slapmBaseGroup DESCRIPTION "The contents of this group has been deprecated in favor of the new slapmBaseGroup2. Older implementations of this MIB would continue its support of the contents of this group." GROUP slapmNotGroup DESCRIPTION "The contents of this group has been deprecated in favor of the new slapmNotGroup2. Older implementations of this MIB would continue its support of the contents of this group." GROUP slapmOptionalGroup DESCRIPTION "The contents of this group has been deprecated." GROUP slapmEndSystemGroup DESCRIPTION "The contents of this group has been deprecated in favor of the new slapmEndSystemGroup2. Older implementations of this MIB would continue its support of the contents of this group." GROUP slapmEndSystemNotGroup DESCRIPTION "The contents of this group has been deprecated in favor of the new slapmEndSystemNotGroup2. Older implementations of this MIB would continue its support of the contents of this group." ::= { slapmCompliances 1 } -- MIB groupings slapmBaseGroup OBJECT-GROUP OBJECTS { slapmSpinLock, slapmPolicyCountQueries, slapmPolicyCountAccesses, slapmPolicyCountSuccessAccesses, slapmPolicyCountNotFounds, slapmPolicyPurgeTime, slapmPolicyTrapEnable, slapmPolicyStatsOperStatus, slapmPolicyStatsActiveConns, slapmPolicyStatsFirstActivated, slapmPolicyStatsLastMapping, slapmPolicyStatsInOctets, slapmPolicyStatsOutOctets, slapmPolicyStatsConnectionLimit, slapmPolicyStatsTotalConns, slapmPolicyStatsCountAccepts, slapmPolicyStatsCountDenies, slapmPolicyStatsInDiscards, slapmPolicyStatsOutDiscards, slapmPolicyStatsInPackets, slapmPolicyStatsOutPackets, slapmPolicyStatsMinRate, slapmPolicyStatsMaxRate, slapmPolicyStatsMaxDelay, slapmPolicyMonitorControl, slapmPolicyMonitorStatus, slapmPolicyMonitorInterval, slapmPolicyMonitorIntTime, slapmPolicyMonitorCurrentInRate, slapmPolicyMonitorCurrentOutRate, slapmPolicyMonitorMinRateLow, slapmPolicyMonitorMinRateHigh, slapmPolicyMonitorMaxRateHigh, slapmPolicyMonitorMaxRateLow, slapmPolicyMonitorMaxDelayHigh, slapmPolicyMonitorMaxDelayLow, slapmPolicyMonitorMinInRateNotAchieves, slapmPolicyMonitorMaxInRateExceeds, slapmPolicyMonitorMaxDelayExceeds, slapmPolicyMonitorMinOutRateNotAchieves, slapmPolicyMonitorMaxOutRateExceeds, slapmPolicyMonitorCurrentDelayRate, slapmPolicyMonitorRowStatus } STATUS deprecated DESCRIPTION "The group of objects defined by this MIB that are required for all implementations to be compliant." ::= { slapmGroups 1 } slapmOptionalGroup OBJECT-GROUP OBJECTS { slapmPolicyStatsInProfileOctets, slapmPolicyStatsOutProfileOctets } STATUS deprecated DESCRIPTION "The group of objects defined by this MIB that are optional." ::= { slapmGroups 2 } slapmEndSystemGroup OBJECT-GROUP OBJECTS { slapmPolicyTrapFilter, slapmSubcomponentProtocol, slapmSubcomponentSystemAddress, slapmSubcomponentPolicyName, slapmSubcomponentTrafficProfileName, slapmSubcomponentLastActivity, slapmSubcomponentInOctets, slapmSubcomponentOutOctets, slapmSubcomponentTcpOutBufferedOctets, slapmSubcomponentTcpInBufferedOctets, slapmSubcomponentTcpReXmts, slapmSubcomponentTcpRoundTripTime, slapmSubcomponentTcpRoundTripVariance, slapmSubcomponentInPdus, slapmSubcomponentOutPdus, slapmSubcomponentApplName, slapmSubcomponentMonitorStatus, slapmSubcomponentMonitorIntTime, slapmSubcomponentMonitorCurrentOutRate, slapmSubcomponentMonitorCurrentInRate } STATUS deprecated DESCRIPTION "The group of objects defined by this MIB that are required for end system implementations." ::= { slapmGroups 3 } slapmNotGroup NOTIFICATION-GROUP NOTIFICATIONS { slapmMonitoredEventNotAchieved, slapmMonitoredEventOkay, slapmPolicyProfileDeleted, slapmPolicyMonitorDeleted } STATUS deprecated DESCRIPTION "The group of notifications defined by this MIB that MUST be implemented." ::= { slapmGroups 4 } slapmEndSystemNotGroup NOTIFICATION-GROUP NOTIFICATIONS { slapmSubcomponentMonitoredEventNotAchieved, slapmSubcomponentMonitoredEventOkay } STATUS deprecated DESCRIPTION "The group of objects defined by this MIB that are required for end system implementations." ::= { slapmGroups 5 } slapmBaseGroup2 OBJECT-GROUP OBJECTS { slapmSpinLock, slapmPolicyCountQueries, slapmPolicyCountAccesses, slapmPolicyCountSuccessAccesses, slapmPolicyCountNotFounds, slapmPolicyPurgeTime, slapmPolicyTrapEnable, slapmPolicyNameOfRule, slapmPolicyRuleStatsOperStatus, slapmPolicyRuleStatsActiveConns, slapmPolicyRuleStatsTotalConns, slapmPolicyRuleStatsLActivated, slapmPolicyRuleStatsLastMapping, slapmPolicyRuleStatsInOctets, slapmPolicyRuleStatsOutOctets, slapmPolicyRuleStatsConnLimit, slapmPolicyRuleStatsCountAccepts, slapmPolicyRuleStatsCountDenies, slapmPolicyRuleStatsInDiscards, slapmPolicyRuleStatsOutDiscards, slapmPolicyRuleStatsInPackets, slapmPolicyRuleStatsOutPackets, slapmPolicyRuleStatsInProOctets, slapmPolicyRuleStatsOutProOctets, slapmPolicyRuleStatsMinRate, slapmPolicyRuleStatsMaxRate, slapmPolicyRuleStatsMaxDelay, slapmPolicyRuleStatsTotalRsvpFlows, slapmPolicyRuleStatsActRsvpFlows, slapmPRMonControl, slapmPRMonStatus, slapmPRMonInterval, slapmPRMonIntTime, slapmPRMonCurrentInRate, slapmPRMonCurrentOutRate, slapmPRMonMinRateLow, slapmPRMonMinRateHigh, slapmPRMonMaxRateHigh, slapmPRMonMaxRateLow, slapmPRMonMaxDelayHigh, slapmPRMonMaxDelayLow, slapmPRMonMinInRateNotAchieves, slapmPRMonMaxInRateExceeds, slapmPRMonMaxDelayExceeds, slapmPRMonMinOutRateNotAchieves, slapmPRMonMaxOutRateExceeds, slapmPRMonCurrentDelayRate, slapmPRMonRowStatus } STATUS current DESCRIPTION "The group of objects defined by this MIB that are required for all implementations to be compliant." ::= { slapmGroups 6 } slapmEndSystemGroup2 OBJECT-GROUP OBJECTS { slapmPolicyTrapFilter, slapmSubcomponentProtocol, slapmSubcomponentSystemAddress, slapmSubcomponentLastActivity, slapmSubcomponentInOctets, slapmSubcomponentOutOctets, slapmSubcomponentTcpOutBufferedOctets, slapmSubcomponentTcpInBufferedOctets, slapmSubcomponentTcpReXmts, slapmSubcomponentTcpRoundTripTime, slapmSubcomponentTcpRoundTripVariance, slapmSubcomponentInPdus, slapmSubcomponentOutPdus, slapmSubcomponentApplName, slapmSubcomponentMonitorStatus, slapmSubcomponentMonitorIntTime, slapmSubcomponentMonitorCurrentOutRate, slapmSubcomponentMonitorCurrentInRate, slapmSubcomponentPolicyRuleIndex } STATUS current DESCRIPTION "The group of objects defined by this MIB that are required for end system implementations." ::= { slapmGroups 7 } slapmNotGroup2 NOTIFICATION-GROUP NOTIFICATIONS { slapmPolicyRuleMonNotOkay, slapmPolicyRuleMonOkay, slapmPolicyRuleDeleted, slapmPolicyRuleMonDeleted } STATUS current DESCRIPTION "The group of notifications defined by this MIB that MUST be implemented." ::= { slapmGroups 8 } slapmEndSystemNotGroup2 NOTIFICATION-GROUP NOTIFICATIONS { slapmSubcMonitorNotOkay, slapmSubcMonitorOkay } STATUS current DESCRIPTION "The group of objects defined by this MIB that are required for end system implementations." ::= { slapmGroups 9 } END