RFC1269-MIB DEFINITIONS ::= BEGIN IMPORTS NetworkAddress, IpAddress, Counter FROM RFC1155-SMI mib-2 FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; -- This MIB module uses the extended OBJECT-TYPE macro as -- defined in [9], and the TRAP-TYPE macro as defined -- in [10]. bgp OBJECT IDENTIFIER ::= { mib-2 15 } bgpVersion OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Vector of supported BGP protocol version numbers. Each peer negotiates the version from this vector. Versions are identified via the string of bits contained within this object. The first octet contains bits 0 to 7, the second octet contains bits 8 to 15, and so on, with the most significant bit referring to the lowest bit number in the octet (e.g., the MSB of the first octet refers to bit 0). If a bit, i, is present and set, then the version (i+1) of the BGP is supported." ::= { bgp 1 } bgpLocalAs OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The local autonomous system number." ::= { bgp 2 } bgpPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF BgpPeerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The bgp peer table." ::= { bgp 3 } bgpIdentifier OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The BGP Identifier of local system." ::= { bgp 4 } bgpPeerEntry OBJECT-TYPE SYNTAX BgpPeerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a BGP peer connection." INDEX { bgpPeerRemoteAddr } ::= { bgpPeerTable 1 } BgpPeerEntry ::= SEQUENCE { bgpPeerIdentifier IpAddress, bgpPeerState INTEGER, bgpPeerAdminStatus INTEGER, bgpPeerNegotiatedVersion INTEGER, bgpPeerLocalAddr IpAddress, bgpPeerLocalPort INTEGER, bgpPeerRemoteAddr IpAddress, bgpPeerRemotePort INTEGER, bgpPeerRemoteAs INTEGER, bgpPeerInUpdates Counter, bgpPeerOutUpdates Counter, bgpPeerInTotalMessages Counter, bgpPeerOutTotalMessages Counter, bgpPeerLastError OCTET STRING } bgpPeerIdentifier OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The BGP Identifier of this entry's BGP peer." ::= { bgpPeerEntry 1 } bgpPeerState OBJECT-TYPE SYNTAX INTEGER { idle(1), connect(2), active(3), opensent(4), openconfirm(5), established(6) } ACCESS read-only STATUS mandatory DESCRIPTION "The bgp peer connection state. " ::= { bgpPeerEntry 2 } bgpPeerAdminStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the BGP connection. A transition from 'stop' to 'start' will cause the BGP Start Event to be generated. A transition from 'start' to 'stop' will cause the BGP Stop Event to be generated. This parameter can be used to restart BGP peer connections. Care should be used in providing write access to this object without adequate authentication." ::= { bgpPeerEntry 3 } bgpPeerNegotiatedVersion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The negotiated version of BGP running between the two peers. " ::= { bgpPeerEntry 4 } bgpPeerLocalAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The local IP address of this entry's BGP connection." ::= { bgpPeerEntry 5 } bgpPeerLocalPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The local port for the TCP connection between the BGP peers." ::= { bgpPeerEntry 6 } bgpPeerRemoteAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The remote IP address of this entry's BGP peer." ::= { bgpPeerEntry 7 } bgpPeerRemotePort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The remote port for the TCP connection between the BGP peers. Note that the objects bgpLocalAddr, bgpLocalPort, bgpRemoteAddr and bgpRemotePort provide the appropriate reference to the standard MIB TCP connection table." ::= { bgpPeerEntry 8 } bgpPeerRemoteAs OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The remote autonomous system number." ::= { bgpPeerEntry 9 } bgpPeerInUpdates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of BGP UPDATE messages received on this connection. This object should be initialized to zero when the connection is established." ::= { bgpPeerEntry 10 } bgpPeerOutUpdates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of BGP UPDATE messages received on this connection. This object should be initialized to zero when the connection is established." ::= { bgpPeerEntry 11} bgpPeerInTotalMessages OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of messages received from the remote peer on this connection. This object should be initialized to zero when the connection is established." ::= { bgpPeerEntry 12 } bgpPeerOutTotalMessages OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of messages transmitted to the remote peer on this connection. This object should be initialized to zero when the connection is established." ::= { bgpPeerEntry 13 } bgpPeerLastError OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) ACCESS read-only STATUS mandatory DESCRIPTION "The last error code and subcode seen by this peer on this connection. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code; the second contains the subcode." ::= { bgpPeerEntry 14 } bgpRcvdPathAttrTable OBJECT-TYPE SYNTAX SEQUENCE OF BgpPathAttrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The BGP Received Path Attribute Table contains information about paths to destination networks received by all peers." ::= { bgp 5 } bgpPathAttrEntry OBJECT-TYPE SYNTAX BgpPathAttrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a path to a network." INDEX { bgpPathAttrDestNetwork, bgpPathAttrPeer } ::= { bgpRcvdPathAttrTable 1 } BgpPathAttrEntry ::= SEQUENCE { bgpPathAttrPeer IpAddress, bgpPathAttrDestNetwork IpAddress, bgpPathAttrOrigin INTEGER, bgpPathAttrASPath OCTET STRING, bgpPathAttrNextHop IpAddress, bgpPathAttrInterASMetric INTEGER } bgpPathAttrPeer OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address of the peer where the path information was learned." ::= { bgpPathAttrEntry 1 } bgpPathAttrDestNetwork OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The address of the destination network." ::= { bgpPathAttrEntry 2 } bgpPathAttrOrigin OBJECT-TYPE SYNTAX INTEGER { igp(1),-- networks are interior egp(2),-- networks learned via EGP incomplete(3) -- undetermined } ACCESS read-only STATUS mandatory DESCRIPTION "The ultimate origin of the path information." ::= { bgpPathAttrEntry 3 } bgpPathAttrASPath OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The set of ASs that must be traversed to reach the network. ( This object is probably best represented as SEQUENCE OF INTEGER. For SMI compatibility, though, it is represented as OCTET STRING. Each AS is represented as a pair of octets according to the following algorithm: first-byte-of-pair = ASNumber / 256; second-byte-of-pair = ASNumber & 255;" ::= { bgpPathAttrEntry 4 } bgpPathAttrNextHop OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The address of the border router that should be used for the destination network." ::= { bgpPathAttrEntry 5 } bgpPathAttrInterASMetric OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The optional inter-AS metric. If this attribute has not been provided for this route, the value for this object is 0." ::= { bgpPathAttrEntry 6 } bgpEstablished TRAP-TYPE ENTERPRISE bgp VARIABLES { bgpPeerRemoteAddr, bgpPeerLastError, bgpPeerState } DESCRIPTION "The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state. " ::= 1 bgpBackwardTransition TRAP-TYPE ENTERPRISE bgp VARIABLES { bgpPeerRemoteAddr, bgpPeerLastError, bgpPeerState } DESCRIPTION "The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state." ::= 2 END