RADIUS-ACC-CLIENT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, Counter32, Integer32, Gauge32, IpAddress, TimeTicks, mib-2 FROM SNMPv2-SMI SnmpAdminString FROM SNMP-FRAMEWORK-MIB InetAddressType, InetAddress, InetPortNumber FROM INET-ADDRESS-MIB MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF; radiusAccClientMIB MODULE-IDENTITY LAST-UPDATED "200608210000Z" -- 21 August 2006 ORGANIZATION "IETF RADIUS Extensions Working Group." CONTACT-INFO " Bernard Aboba Microsoft One Microsoft Way Redmond, WA 98052 US Phone: +1 425 936 6605 EMail: bernarda@microsoft.com" DESCRIPTION "The MIB module for entities implementing the client side of the Remote Authentication Dial-In User Service (RADIUS) accounting protocol. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4670; see the RFC itself for full legal notices." REVISION "200608210000Z" -- 21 August 2006 DESCRIPTION "Revised version as published in RFC 4670. This version obsoletes that of RFC 2620 by deprecating the MIB table containing IPv4-only address formats and defining a new table to add support for version-neutral IP address formats. The remaining MIB objects from RFC 2620 are carried forward into this version." REVISION "199906110000Z" -- 11 Jun 1999 DESCRIPTION "Initial version as published in RFC 2620." ::= { radiusAccounting 2 } radiusMIB OBJECT-IDENTITY STATUS current DESCRIPTION "The OID assigned to RADIUS MIB work by the IANA." ::= { mib-2 67 } radiusAccounting OBJECT IDENTIFIER ::= {radiusMIB 2} radiusAccClientMIBObjects OBJECT IDENTIFIER ::= { radiusAccClientMIB 1 } radiusAccClient OBJECT IDENTIFIER ::= { radiusAccClientMIBObjects 1 } radiusAccClientInvalidServerAddresses OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Accounting-Response packets received from unknown addresses." ::= { radiusAccClient 1 } radiusAccClientIdentifier OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The NAS-Identifier of the RADIUS accounting client. This is not necessarily the same as sysName in MIB II." REFERENCE "RFC 2865 section 5.32" ::= { radiusAccClient 2 } radiusAccServerTable OBJECT-TYPE SYNTAX SEQUENCE OF RadiusAccServerEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The (conceptual) table listing the RADIUS accounting servers with which the client shares a secret." ::= { radiusAccClient 3 } radiusAccServerEntry OBJECT-TYPE SYNTAX RadiusAccServerEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "An entry (conceptual row) representing a RADIUS accounting server with which the client shares a secret." INDEX { radiusAccServerIndex } ::= { radiusAccServerTable 1 } RadiusAccServerEntry ::= SEQUENCE { radiusAccServerIndex Integer32, radiusAccServerAddress IpAddress, radiusAccClientServerPortNumber Integer32, radiusAccClientRoundTripTime TimeTicks, radiusAccClientRequests Counter32, radiusAccClientRetransmissions Counter32, radiusAccClientResponses Counter32, radiusAccClientMalformedResponses Counter32, radiusAccClientBadAuthenticators Counter32, radiusAccClientPendingRequests Gauge32, radiusAccClientTimeouts Counter32, radiusAccClientUnknownTypes Counter32, radiusAccClientPacketsDropped Counter32 } radiusAccServerIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A number uniquely identifying each RADIUS Accounting server with which this client communicates." ::= { radiusAccServerEntry 1 } radiusAccServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The IP address of the RADIUS accounting server referred to in this table entry." ::= { radiusAccServerEntry 2 } radiusAccClientServerPortNumber OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The UDP port the client is using to send requests to this server." REFERENCE "RFC 2866 section 3" ::= { radiusAccServerEntry 3 } radiusAccClientRoundTripTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The time interval between the most recent Accounting-Response and the Accounting-Request that matched it from this RADIUS accounting server." REFERENCE "RFC 2866 section 2" ::= { radiusAccServerEntry 4 } -- Request/Response statistics -- -- Requests = Responses + PendingRequests + ClientTimeouts -- -- Responses - MalformedResponses - BadAuthenticators - -- UnknownTypes - PacketsDropped = Successfully received radiusAccClientRequests OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of RADIUS Accounting-Request packets sent. This does not include retransmissions." REFERENCE "RFC 2866 section 4.1" ::= { radiusAccServerEntry 5 } radiusAccClientRetransmissions OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of RADIUS Accounting-Request packets retransmitted to this RADIUS accounting server. Retransmissions include retries where the Identifier and Acct-Delay have been updated, as well as those in which they remain the same." REFERENCE "RFC 2866 section 2" ::= { radiusAccServerEntry 6 } radiusAccClientResponses OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of RADIUS packets received on the accounting port from this server." REFERENCE "RFC 2866 section 4.2" ::= { radiusAccServerEntry 7 } radiusAccClientMalformedResponses OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of malformed RADIUS Accounting-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators and unknown types are not included as malformed accounting responses." REFERENCE "RFC 2866 section 3" ::= { radiusAccServerEntry 8 } radiusAccClientBadAuthenticators OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of RADIUS Accounting-Response packets that contained invalid authenticators received from this server." REFERENCE "RFC 2866 section 3" ::= { radiusAccServerEntry 9 } radiusAccClientPendingRequests OBJECT-TYPE SYNTAX Gauge32 UNITS "packets" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of RADIUS Accounting-Request packets sent to this server that have not yet timed out or received a response. This variable is incremented when an Accounting-Request is sent and decremented due to receipt of an Accounting-Response, a timeout, or a retransmission." REFERENCE "RFC 2866 section 2" ::= { radiusAccServerEntry 10 } radiusAccClientTimeouts OBJECT-TYPE SYNTAX Counter32 UNITS "timeouts" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of accounting timeouts to this server. After a timeout, the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as an Accounting-Request as well as a timeout." REFERENCE "RFC 2866 section 2" ::= { radiusAccServerEntry 11 } radiusAccClientUnknownTypes OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of RADIUS packets of unknown type that were received from this server on the accounting port." REFERENCE "RFC 2866 section 4" ::= { radiusAccServerEntry 12 } radiusAccClientPacketsDropped OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of RADIUS packets that were received from this server on the accounting port and dropped for some other reason." ::= { radiusAccServerEntry 13 } -- New MIB objects added in this revision radiusAccServerExtTable OBJECT-TYPE SYNTAX SEQUENCE OF RadiusAccServerExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the RADIUS accounting servers with which the client shares a secret." ::= { radiusAccClient 4 } radiusAccServerExtEntry OBJECT-TYPE SYNTAX RadiusAccServerExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) representing a RADIUS accounting server with which the client shares a secret." INDEX { radiusAccServerExtIndex } ::= { radiusAccServerExtTable 1 } RadiusAccServerExtEntry ::= SEQUENCE { radiusAccServerExtIndex Integer32, radiusAccServerInetAddressType InetAddressType, radiusAccServerInetAddress InetAddress, radiusAccClientServerInetPortNumber InetPortNumber, radiusAccClientExtRoundTripTime TimeTicks, radiusAccClientExtRequests Counter32, radiusAccClientExtRetransmissions Counter32, radiusAccClientExtResponses Counter32, radiusAccClientExtMalformedResponses Counter32, radiusAccClientExtBadAuthenticators Counter32, radiusAccClientExtPendingRequests Gauge32, radiusAccClientExtTimeouts Counter32, radiusAccClientExtUnknownTypes Counter32, radiusAccClientExtPacketsDropped Counter32, radiusAccClientCounterDiscontinuity TimeTicks } radiusAccServerExtIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A number uniquely identifying each RADIUS Accounting server with which this client communicates." ::= { radiusAccServerExtEntry 1 } radiusAccServerInetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of address format used for the radiusAccServerInetAddress object." ::= { radiusAccServerExtEntry 2 } radiusAccServerInetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the RADIUS accounting server referred to in this table entry, using the version-neutral IP address format." ::= { radiusAccServerExtEntry 3 } radiusAccClientServerInetPortNumber OBJECT-TYPE SYNTAX InetPortNumber ( 1..65535 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The UDP port the client is using to send requests to this accounting server. The value zero (0) is invalid." REFERENCE "RFC 2866 section 3" ::= { radiusAccServerExtEntry 4 } radiusAccClientExtRoundTripTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval between the most recent Accounting-Response and the Accounting-Request that matched it from this RADIUS accounting server." REFERENCE "RFC 2866 section 2" ::= { radiusAccServerExtEntry 5 } -- Request/Response statistics -- -- Requests = Responses + PendingRequests + ClientTimeouts -- -- Responses - MalformedResponses - BadAuthenticators - -- UnknownTypes - PacketsDropped = Successfully received radiusAccClientExtRequests OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Accounting-Request packets sent. This does not include retransmissions. This counter may experience a discontinuity when the RADIUS Accounting Client module within the managed entity is reinitialized, as indicated by the current value of radiusAccClientCounterDiscontinuity." REFERENCE "RFC 2866 section 4.1" ::= { radiusAccServerExtEntry 6 } radiusAccClientExtRetransmissions OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Accounting-Request packets retransmitted to this RADIUS accounting server. Retransmissions include retries where the Identifier and Acct-Delay have been updated, as well as those in which they remain the same. This counter may experience a discontinuity when the RADIUS Accounting Client module within the managed entity is reinitialized, as indicated by the current value of radiusAccClientCounterDiscontinuity." REFERENCE "RFC 2866 section 2" ::= { radiusAccServerExtEntry 7 } radiusAccClientExtResponses OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets received on the accounting port from this server. This counter may experience a discontinuity when the RADIUS Accounting Client module within the managed entity is reinitialized, as indicated by the current value of radiusAccClientCounterDiscontinuity." REFERENCE "RFC 2866 section 4.2" ::= { radiusAccServerExtEntry 8 } radiusAccClientExtMalformedResponses OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of malformed RADIUS Accounting-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators and unknown types are not included as malformed accounting responses. This counter may experience a discontinuity when the RADIUS Accounting Client module within the managed entity is reinitialized, as indicated by the current value of radiusAccClientCounterDiscontinuity." REFERENCE "RFC 2866 section 3" ::= { radiusAccServerExtEntry 9 } radiusAccClientExtBadAuthenticators OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Accounting-Response packets that contained invalid authenticators received from this server. This counter may experience a discontinuity when the RADIUS Accounting Client module within the managed entity is reinitialized, as indicated by the current value of radiusAccClientCounterDiscontinuity." REFERENCE "RFC 2866 section 3" ::= { radiusAccServerExtEntry 10 } radiusAccClientExtPendingRequests OBJECT-TYPE SYNTAX Gauge32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Accounting-Request packets sent to this server that have not yet timed out or received a response. This variable is incremented when an Accounting-Request is sent and decremented due to receipt of an Accounting-Response, a timeout, or a retransmission. This counter may experience a discontinuity when the RADIUS Accounting Client module within the managed entity is reinitialized, as indicated by the current value of radiusAccClientCounterDiscontinuity." REFERENCE "RFC 2866 section 2" ::= { radiusAccServerExtEntry 11 } radiusAccClientExtTimeouts OBJECT-TYPE SYNTAX Counter32 UNITS "timeouts" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of accounting timeouts to this server. After a timeout, the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as an Accounting-Request as well as a timeout. This counter may experience a discontinuity when the RADIUS Accounting Client module within the managed entity is reinitialized, as indicated by the current value of radiusAccClientCounterDiscontinuity." REFERENCE "RFC 2866 section 2" ::= { radiusAccServerExtEntry 12 } radiusAccClientExtUnknownTypes OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets of unknown type that were received from this server on the accounting port. This counter may experience a discontinuity when the RADIUS Accounting Client module within the managed entity is reinitialized, as indicated by the current value of radiusAccClientCounterDiscontinuity." REFERENCE "RFC 2866 section 4" ::= { radiusAccServerExtEntry 13 } radiusAccClientExtPacketsDropped OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets that were received from this server on the accounting port and dropped for some other reason. This counter may experience a discontinuity when the RADIUS Accounting Client module within the managed entity is reinitialized, as indicated by the current value of radiusAccClientCounterDiscontinuity." ::= { radiusAccServerExtEntry 14 } radiusAccClientCounterDiscontinuity OBJECT-TYPE SYNTAX TimeTicks UNITS "centiseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of centiseconds since the last discontinuity in the RADIUS Accounting Client counters. A discontinuity may be the result of a reinitialization of the RADIUS Accounting Client module within the managed entity." ::= { radiusAccServerExtEntry 15 } -- conformance information radiusAccClientMIBConformance OBJECT IDENTIFIER ::= { radiusAccClientMIB 2 } radiusAccClientMIBCompliances OBJECT IDENTIFIER ::= { radiusAccClientMIBConformance 1 } radiusAccClientMIBGroups OBJECT IDENTIFIER ::= { radiusAccClientMIBConformance 2 } -- units of conformance radiusAccClientMIBCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for accounting clients implementing the RADIUS Accounting Client MIB. Implementation of this module is for IPv4-only entities, or for backwards compatibility use with entities that support both IPv4 and IPv6." MODULE -- this module MANDATORY-GROUPS { radiusAccClientMIBGroup } ::= { radiusAccClientMIBCompliances 1 } radiusAccClientExtMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for accounting clients implementing the RADIUS Accounting Client IPv6 Extensions MIB. Implementation of this module is for entities that support IPv6, or support IPv4 and IPv6." MODULE -- this module MANDATORY-GROUPS { radiusAccClientExtMIBGroup } OBJECT radiusAccServerInetAddressType SYNTAX InetAddressType { ipv4(1), ipv6(2) } DESCRIPTION "An implementation is only required to support IPv4 and globally unique IPv6 addresses." OBJECT radiusAccServerInetAddress SYNTAX InetAddress ( SIZE (4|16) ) DESCRIPTION "An implementation is only required to support IPv4 and globally unique IPv6 addresses." ::= { radiusAccClientMIBCompliances 2 } -- units of conformance radiusAccClientMIBGroup OBJECT-GROUP OBJECTS { radiusAccClientIdentifier, radiusAccClientInvalidServerAddresses, radiusAccServerAddress, radiusAccClientServerPortNumber, radiusAccClientRoundTripTime, radiusAccClientRequests, radiusAccClientRetransmissions, radiusAccClientResponses, radiusAccClientMalformedResponses, radiusAccClientBadAuthenticators, radiusAccClientPendingRequests, radiusAccClientTimeouts, radiusAccClientUnknownTypes, radiusAccClientPacketsDropped } STATUS deprecated DESCRIPTION "The basic collection of objects providing management of RADIUS Accounting Clients." ::= { radiusAccClientMIBGroups 1 } radiusAccClientExtMIBGroup OBJECT-GROUP OBJECTS { radiusAccClientIdentifier, radiusAccClientInvalidServerAddresses, radiusAccServerInetAddressType, radiusAccServerInetAddress, radiusAccClientServerInetPortNumber, radiusAccClientExtRoundTripTime, radiusAccClientExtRequests, radiusAccClientExtRetransmissions, radiusAccClientExtResponses, radiusAccClientExtMalformedResponses, radiusAccClientExtBadAuthenticators, radiusAccClientExtPendingRequests, radiusAccClientExtTimeouts, radiusAccClientExtUnknownTypes, radiusAccClientExtPacketsDropped, radiusAccClientCounterDiscontinuity } STATUS current DESCRIPTION "The basic collection of objects providing management of RADIUS Accounting Clients." ::= { radiusAccClientMIBGroups 2 } END