PARALLEL-MIB DEFINITIONS ::= BEGIN
 
IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
    Counter32, Integer32
        FROM SNMPv2-SMI
    InterfaceIndex
        FROM IF-MIB
    transmission
        FROM RFC1213-MIB
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF;
 
 
para MODULE-IDENTITY
     LAST-UPDATED "9405261700Z"
     ORGANIZATION "IETF Character MIB Working Group"
     CONTACT-INFO
            "        Bob Stewart
             Postal: Xyplex, Inc.
                     295 Foster Street
                     Littleton, MA 01460
 
                Tel: 508-952-4816
                Fax: 508-952-4887
             E-mail: rlstewart@eng.xyplex.com"
     DESCRIPTION
            "The MIB module for Parallel-printer-like hardware devices."
    ::= { transmission 34 }
 
 
-- Generic Parallel-printer-like information
 
paraNumber OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of ports (regardless of their current
        state) in the Parallel-printer-like port table."
    ::= { para 1 }
 
 
-- the Parallel-printer-like Port table
 
paraPortTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ParaPortEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A list of port entries.  The number of entries is
        given by the value of paraNumber."
    ::= { para 2 }
 
paraPortEntry OBJECT-TYPE
    SYNTAX ParaPortEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Status and parameter values for a port."
    INDEX { paraPortIndex }
    ::= { paraPortTable 1 }
 
ParaPortEntry ::=
    SEQUENCE {
        paraPortIndex
            InterfaceIndex,
        paraPortType
            INTEGER,
        paraPortInSigNumber
            Integer32,
        paraPortOutSigNumber
            Integer32
    }
 
paraPortIndex OBJECT-TYPE
    SYNTAX InterfaceIndex
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The value of ifIndex for the port.  By convention
        and if possible, hardware port numbers map directly
        to external connectors.  The value for each port must
        remain constant at least from one re-initialization
        of the network management agent to the next."
    ::= { paraPortEntry 1 }
 
paraPortType OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        centronics(2),
        dataproducts(3)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The port's hardware type."
    ::= { paraPortEntry 2 }
 
paraPortInSigNumber OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of input signals for the port in the
        input signal table (paraPortInSigTable).  The table
        contains entries only for those signals the software
        can detect and that are useful to observe."
    ::= { paraPortEntry 3 }
 
paraPortOutSigNumber OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of output signals for the port in the
        output signal table (paraPortOutSigTable).  The
        table contains entries only for those signals the
        software can assert and that are useful to observe."
    ::= { paraPortEntry 4 }
 
-- Parallel-printer-like Input Signal Table
 
paraInSigTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ParaInSigEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A list of port input control signal entries."
    ::= { para 3 }
 
paraInSigEntry OBJECT-TYPE
    SYNTAX ParaInSigEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Input control signal status for a hardware port."
    INDEX { paraInSigPortIndex, paraInSigName }
    ::= { paraInSigTable 1 }
 
ParaInSigEntry ::=
    SEQUENCE {
        paraInSigPortIndex
            InterfaceIndex,
        paraInSigName
            INTEGER,
        paraInSigState
            INTEGER,
        paraInSigChanges
            Counter32
    }
 
paraInSigPortIndex OBJECT-TYPE
    SYNTAX InterfaceIndex
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The value of paraPortIndex for the port to which
        this entry belongs."
    ::= { paraInSigEntry 1 }
 
paraInSigName OBJECT-TYPE
    SYNTAX INTEGER { power(1), online(2), busy(3),
                     paperout(4), fault(5) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Identification of a hardware signal."
    ::= { paraInSigEntry 2 }
 
paraInSigState OBJECT-TYPE
    SYNTAX INTEGER { none(1), on(2), off(3) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The current signal state."
    ::= { paraInSigEntry 3 }
 
paraInSigChanges OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of times the signal has changed from
        'on' to 'off' or from 'off' to 'on'."
    ::= { paraInSigEntry 4 }
 
 
-- Output Signal Table
 
paraOutSigTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ParaOutSigEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A list of port output control signal entries."
    ::= { para 4 }
 
paraOutSigEntry OBJECT-TYPE
    SYNTAX ParaOutSigEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Output control signal status for a hardware port."
    INDEX { paraOutSigPortIndex, paraOutSigName }
    ::= { paraOutSigTable 1 }
 
ParaOutSigEntry ::=
    SEQUENCE {
        paraOutSigPortIndex
            InterfaceIndex,
        paraOutSigName
            INTEGER,
        paraOutSigState
            INTEGER,
        paraOutSigChanges
            Counter32
    }
 
paraOutSigPortIndex OBJECT-TYPE
    SYNTAX InterfaceIndex
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The value of paraPortIndex for the port to which
        this entry belongs."
    ::= { paraOutSigEntry 1 }
 
paraOutSigName OBJECT-TYPE
    SYNTAX INTEGER { power(1), online(2), busy(3),
                     paperout(4), fault(5) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Identification of a hardware signal."
    ::= { paraOutSigEntry 2 }
 
paraOutSigState OBJECT-TYPE
    SYNTAX INTEGER { none(1), on(2), off(3) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The current signal state."
    ::= { paraOutSigEntry 3 }
 
paraOutSigChanges OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of times the signal has changed from
        'on' to 'off' or from 'off' to 'on'."
    ::= { paraOutSigEntry 4 }
 
 
-- conformance information
 
paraConformance OBJECT IDENTIFIER ::= { para 5 }
 
paraGroups      OBJECT IDENTIFIER ::= { paraConformance 1 }
paraCompliances OBJECT IDENTIFIER ::= { paraConformance 2 }
 
-- compliance statements
 
paraCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
            "The compliance statement for SNMPv2 entities
            which have Parallel-printer-like hardware
            interfaces."
 
    MODULE  -- this module
        MANDATORY-GROUPS { paraGroup }
    ::= { paraCompliances 1 }
 
 
-- units of conformance
 
paraGroup    OBJECT-GROUP
    OBJECTS { paraNumber, paraPortIndex, paraPortType,
              paraPortInSigNumber, paraPortOutSigNumber,
              paraInSigPortIndex, paraInSigName,
              paraInSigState, paraInSigChanges,
              paraOutSigPortIndex, paraOutSigName,
              paraOutSigState, paraOutSigChanges }
    STATUS  current
    DESCRIPTION
            "A collection of objects providing information
             applicable to all Parallel-printer-like interfaces."
    ::= { paraGroups 1 }
 
END