ITU-ALARM-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Gauge32, mib-2 FROM SNMPv2-SMI -- [RFC2578] AutonomousType, RowPointer FROM SNMPv2-TC -- [RFC2579] SnmpAdminString FROM SNMP-FRAMEWORK-MIB -- [RFC3411] alarmListName, alarmModelIndex, alarmActiveDateAndTime, alarmActiveIndex FROM ALARM-MIB -- [RFC3877] ItuPerceivedSeverity, ItuTrendIndication FROM ITU-ALARM-TC-MIB -- [RFC3877] IANAItuProbableCause, IANAItuEventType FROM IANA-ITU-ALARM-TC-MIB -- [RFC3877] MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- [RFC2580] ZeroBasedCounter32 FROM RMON2-MIB; -- [RFC2021] ituAlarmMIB MODULE-IDENTITY LAST-UPDATED "200409090000Z" -- September 09, 2004 ORGANIZATION "IETF Distributed Management Working Group" CONTACT-INFO "WG EMail: disman@ietf.org Subscribe: disman-request@ietf.org http://www.ietf.org/html.charters/disman-charter.html Chair: Randy Presuhn randy_presuhn@mindspring.com Editors: Sharon Chisholm Nortel Networks PO Box 3511 Station C Ottawa, Ont. K1Y 4H7 Canada schishol@nortelnetworks.com Dan Romascanu Avaya Atidim Technology Park, Bldg. #3 Tel Aviv, 61131 Israel Tel: +972-3-645-8414 Email: dromasca@avaya.com" DESCRIPTION "The MIB module describes ITU Alarm information as defined in ITU Recommendation M.3100 [M.3100], X.733 [X.733] and X.736 [X.736]. Copyright (C) The Internet Society (2004). The initial version of this MIB module was published in RFC 3877. For full legal notices see the RFC itself. Supplementary information may be available on: http://www.ietf.org/copyrights/ianamib.html" REVISION "200409090000Z" -- September 09, 2004 DESCRIPTION "Initial version, published as RFC 3877." ::= { mib-2 121 } ituAlarmObjects OBJECT IDENTIFIER ::= { ituAlarmMIB 1 } ituAlarmModel OBJECT IDENTIFIER ::= { ituAlarmObjects 1 } ituAlarmActive OBJECT IDENTIFIER ::= { ituAlarmObjects 2 } ituAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF ItuAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of ITU Alarm information for possible alarms on the system." ::= { ituAlarmModel 1 } ituAlarmEntry OBJECT-TYPE SYNTAX ItuAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries appear in this table whenever an entry is created in the alarmModelTable with a value of alarmModelState in the range from 1 to 6. Entries disappear from this table whenever the corresponding entries are deleted from the alarmModelTable, including in cases where those entries have been deleted due to local system action. The value of alarmModelSpecificPointer has no effect on the creation or deletion of entries in this table. Values of alarmModelState map to values of ituAlarmPerceivedSeverity as follows: alarmModelState -> ituAlarmPerceivedSeverity 1 -> clear (1) 2 -> indeterminate (2) 3 -> warning (6) 4 -> minor (5) 5 -> major (4) 6 -> critical (3) All other values of alarmModelState MUST NOT appear in this table. This table MUST be persistent across system reboots." INDEX { alarmListName, alarmModelIndex, ituAlarmPerceivedSeverity } ::= { ituAlarmTable 1 } ItuAlarmEntry ::= SEQUENCE { ituAlarmPerceivedSeverity ItuPerceivedSeverity, ituAlarmEventType IANAItuEventType, ituAlarmProbableCause IANAItuProbableCause, ituAlarmAdditionalText SnmpAdminString, ituAlarmGenericModel RowPointer } ituAlarmPerceivedSeverity OBJECT-TYPE SYNTAX ItuPerceivedSeverity MAX-ACCESS not-accessible STATUS current DESCRIPTION "ITU perceived severity values." REFERENCE "ITU Recommendation M.3100, 'Generic Network Information Model', 1995 ITU Recommendation X.733, 'Information Technology - Open Systems Interconnection - System Management: Alarm Reporting Function', 1992" ::= { ituAlarmEntry 1 } ituAlarmEventType OBJECT-TYPE SYNTAX IANAItuEventType MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the event type values for the alarms" REFERENCE "ITU Recommendation M.3100, 'Generic Network Information Model', 1995 ITU Recommendation X.733, 'Information Technology - Open Systems Interconnection - System Management: Alarm Reporting Function', 1992 ITU Recommendation X.736, 'Information Technology - Open Systems Interconnection - System Management: Security Alarm Reporting Function', 1992" ::= { ituAlarmEntry 2 } ituAlarmProbableCause OBJECT-TYPE SYNTAX IANAItuProbableCause MAX-ACCESS read-write STATUS current DESCRIPTION "ITU probable cause values." REFERENCE "ITU Recommendation M.3100, 'Generic Network Information Model', 1995 ITU Recommendation X.733, 'Information Technology - Open Systems Interconnection - System Management: Alarm Reporting Function', 1992 ITU Recommendation X.736, 'Information Technology - Open Systems Interconnection - System Management: Security Alarm Reporting Function', 1992" ::= { ituAlarmEntry 3 } ituAlarmAdditionalText OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the additional text field for the alarm." REFERENCE "ITU Recommendation M.3100, 'Generic Network Information Model', 1995 ITU Recommendation X.733, 'Information Technology - Open Systems Interconnection - System Management: Alarm Reporting Function', 1992" ::= { ituAlarmEntry 4} ituAlarmGenericModel OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-write STATUS current DESCRIPTION "This object points to the corresponding row in the alarmModelTable for this alarm severity. This corresponding entry to alarmModelTable could also be derived by performing the reverse of the mapping from alarmModelState to ituAlarmPerceivedSeverity defined in the description of ituAlarmEntry to determine the appropriate { alarmListName, alarmModelIndex, alarmModelState } for this { alarmListName, alarmModelIndex, ituAlarmPerceivedSeverity }." ::= { ituAlarmEntry 5 } -- ITU Active Alarm Table -- ituAlarmActiveTable OBJECT-TYPE SYNTAX SEQUENCE OF ItuAlarmActiveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of ITU information for active alarms entries." ::= { ituAlarmActive 1 } ituAlarmActiveEntry OBJECT-TYPE SYNTAX ItuAlarmActiveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries appear in this table when alarms are active. They are removed when the alarm is no longer occurring." INDEX { alarmListName, alarmActiveDateAndTime, alarmActiveIndex } ::= { ituAlarmActiveTable 1 } ItuAlarmActiveEntry ::= SEQUENCE { ituAlarmActiveTrendIndication ItuTrendIndication, ituAlarmActiveDetector AutonomousType, ituAlarmActiveServiceProvider AutonomousType, ituAlarmActiveServiceUser AutonomousType } ituAlarmActiveTrendIndication OBJECT-TYPE SYNTAX ItuTrendIndication MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the trend indication values for the alarms." REFERENCE "ITU Recommendation M.3100, 'Generic Network Information Model', 1995 ITU Recommendation X.733, 'Information Technology - Open Systems Interconnection - System Management: Alarm Reporting Function', 1992" ::= { ituAlarmActiveEntry 1 } ituAlarmActiveDetector OBJECT-TYPE SYNTAX AutonomousType MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the SecurityAlarmDetector object." REFERENCE "ITU Recommendation X.736, 'Information Technology - Open Systems Interconnection - System Management: Security Alarm Reporting Function', 1992" ::= { ituAlarmActiveEntry 2 } ituAlarmActiveServiceProvider OBJECT-TYPE SYNTAX AutonomousType MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the ServiceProvider object." REFERENCE "ITU Recommendation X.736, 'Information Technology - Open Systems Interconnection - System Management: Security Alarm Reporting Function', 1992" ::= { ituAlarmActiveEntry 3 } ituAlarmActiveServiceUser OBJECT-TYPE SYNTAX AutonomousType MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the ServiceUser object." REFERENCE "ITU Recommendation X.736, 'Information Technology - Open Systems Interconnection - System Management: Security Alarm Reporting Function', 1992" ::= { ituAlarmActiveEntry 4 } -- Statistics and Counters ituAlarmActiveStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ItuAlarmActiveStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the ITU alarm statistics information." ::= { ituAlarmActive 2 } ituAlarmActiveStatsEntry OBJECT-TYPE SYNTAX ItuAlarmActiveStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistics on the current active ITU alarms." INDEX { alarmListName } ::= { ituAlarmActiveStatsTable 1 } ItuAlarmActiveStatsEntry ::= SEQUENCE { ituAlarmActiveStatsIndeterminateCurrent Gauge32, ituAlarmActiveStatsCriticalCurrent Gauge32, ituAlarmActiveStatsMajorCurrent Gauge32, ituAlarmActiveStatsMinorCurrent Gauge32, ituAlarmActiveStatsWarningCurrent Gauge32, ituAlarmActiveStatsIndeterminates ZeroBasedCounter32, ituAlarmActiveStatsCriticals ZeroBasedCounter32, ituAlarmActiveStatsMajors ZeroBasedCounter32, ituAlarmActiveStatsMinors ZeroBasedCounter32, ituAlarmActiveStatsWarnings ZeroBasedCounter32 } ituAlarmActiveStatsIndeterminateCurrent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the current number of active alarms with a ituAlarmPerceivedSeverity of indeterminate." ::= { ituAlarmActiveStatsEntry 1 } ituAlarmActiveStatsCriticalCurrent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the current number of active alarms with a ituAlarmPerceivedSeverity of critical." ::= { ituAlarmActiveStatsEntry 2 } ituAlarmActiveStatsMajorCurrent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the current number of active alarms with a ituAlarmPerceivedSeverity of major." ::= { ituAlarmActiveStatsEntry 3 } ituAlarmActiveStatsMinorCurrent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the current number of active alarms with a ituAlarmPerceivedSeverity of minor." ::= { ituAlarmActiveStatsEntry 4 } ituAlarmActiveStatsWarningCurrent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the current number of active alarms with a ituAlarmPerceivedSeverity of warning." ::= { ituAlarmActiveStatsEntry 5 } ituAlarmActiveStatsIndeterminates OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the total number of active alarms with a ituAlarmPerceivedSeverity of indeterminate since system restart." ::= { ituAlarmActiveStatsEntry 6 } ituAlarmActiveStatsCriticals OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the total number of active alarms with a ituAlarmPerceivedSeverity of critical since system restart." ::= { ituAlarmActiveStatsEntry 7 } ituAlarmActiveStatsMajors OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the total number of active alarms with a ituAlarmPerceivedSeverity of major since system restart." ::= { ituAlarmActiveStatsEntry 8 } ituAlarmActiveStatsMinors OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the total number of active alarms with a ituAlarmPerceivedSeverity of minor since system restart." ::= { ituAlarmActiveStatsEntry 9 } ituAlarmActiveStatsWarnings OBJECT-TYPE SYNTAX ZeroBasedCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the total number of active alarms with a ituAlarmPerceivedSeverity of warning since system restart." ::= { ituAlarmActiveStatsEntry 10 } -- Conformance ituAlarmConformance OBJECT IDENTIFIER ::= { ituAlarmMIB 2 } ituAlarmCompliances OBJECT IDENTIFIER ::= { ituAlarmConformance 1 } ituAlarmCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for systems supporting the ITU Alarm MIB." MODULE -- this module MANDATORY-GROUPS { ituAlarmGroup } GROUP ituAlarmServiceUserGroup DESCRIPTION "This group is optional." GROUP ituAlarmSecurityGroup DESCRIPTION "This group is optional." GROUP ituAlarmStatisticsGroup DESCRIPTION "This group is optional." ::= { ituAlarmCompliances 1 } ituAlarmGroups OBJECT IDENTIFIER ::= { ituAlarmConformance 2 } ituAlarmGroup OBJECT-GROUP OBJECTS { ituAlarmEventType, ituAlarmProbableCause, ituAlarmGenericModel } STATUS current DESCRIPTION "ITU alarm details list group." ::= { ituAlarmGroups 1} ituAlarmServiceUserGroup OBJECT-GROUP OBJECTS { ituAlarmAdditionalText, ituAlarmActiveTrendIndication } STATUS current DESCRIPTION "The use of these parameters is a service-user option." ::= { ituAlarmGroups 2 } ituAlarmSecurityGroup OBJECT-GROUP OBJECTS { ituAlarmActiveDetector, ituAlarmActiveServiceProvider, ituAlarmActiveServiceUser } STATUS current DESCRIPTION "Security Alarm Reporting Function" REFERENCE "ITU Recommendation X.736, 'Information Technology - Open Systems Interconnection - System Management: Security Alarm Reporting Function', 1992" ::= { ituAlarmGroups 3 } ituAlarmStatisticsGroup OBJECT-GROUP OBJECTS { ituAlarmActiveStatsIndeterminateCurrent, ituAlarmActiveStatsCriticalCurrent, ituAlarmActiveStatsMajorCurrent, ituAlarmActiveStatsMinorCurrent, ituAlarmActiveStatsWarningCurrent, ituAlarmActiveStatsIndeterminates, ituAlarmActiveStatsCriticals, ituAlarmActiveStatsMajors, ituAlarmActiveStatsMinors, ituAlarmActiveStatsWarnings } STATUS current DESCRIPTION "ITU Active Alarm Statistics." ::= { ituAlarmGroups 4 } END