COFFEE-POT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, transmission FROM SNMPv2-SMI TimeInterval, DisplayString FROM SNMPv2-TC; coffee MODULE-IDENTITY LAST-UPDATED "9803231700Z" ORGANIZATION "Networked Appliance Management Working Group" CONTACT-INFO " Michael Slavitch Loran Technologies, 955 Green Valley Crescent Ottawa, Ontario Canada K2A 0B6 Tel: 613-723-7505 Fax: 613-723-7209 E-mail: slavitch@loran.com" DESCRIPTION "The MIB Module for coffee vending devices." ::= { transmission 132 } potName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor description of the pot under management" ::= { coffee 1 } potCapacity OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of units of beverage supported by this device (regardless of its current state) ." ::= { coffee 2 } potType OBJECT-TYPE SYNTAX INTEGER { automatic-drip(1), percolator(2), french-press(3), espresso(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The brew type of the coffee pot." ::= { coffee 3 } potLocation OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "The physical location of the pot in question" ::= { coffee 4 } potMonitor OBJECT IDENTIFIER ::= { coffee 6 } potOperStatus OBJECT-TYPE SYNTAX INTEGER { off(1), brewing(2), holding(3), other(4), waiting(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operating status of the pot in question. Note that this is a read-only feature. Current hardware prevents us from changing the port state via SNMP." ::= { potMonitor 1 } potLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of units of coffee under management. The units of level are defined in potMetric below." ::= { potMonitor 2 } potMetric OBJECT-TYPE SYNTAX INTEGER { espresso(1), demi-tasse(2), cup(3), mug(4), bucket(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor description of the pot under management" ::= { potMonitor 3 } potStartTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The time in seconds since Jan 1 1970 to start the pot if and only if potOperStatus is waiting(5)" ::= { potMonitor 4 } lastStartTime OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of time, in TimeTicks, since the coffee making process was initiated." ::= { potMonitor 5 } potTemperature OBJECT-TYPE SYNTAX Integer32 UNITS "degrees Centigrade" MAX-ACCESS read-only STATUS current DESCRIPTION "The ambient temperature of the coffee within the pot" ::= { potMonitor 6 } END