APPLETALK-MIB DEFINITIONS ::= BEGIN IMPORTS Counter, IpAddress, TimeTicks FROM RFC1155-SMI DisplayString, mib-2 FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212; -- This MIB module uses the extended OBJECT-TYPE macro as -- defined in RFC-1212. -- The following reference is used in this MIB: -- [Inside AppleTalk] -- This refers to Gursharan S. Sidhu, Richard F. Andrews, and -- Alan B. Oppenheimer, Inside AppleTalk, Second Edition, -- Addison Wesley, (1990). -- AppleTalk MIB appletalk OBJECT IDENTIFIER ::= { mib-2 13 } ATNetworkNumber ::= -- 2 octets of net number -- in network byte order OCTET STRING (SIZE (2)) DdpNodeAddress ::= -- 2 octets of net number -- in network byte order, -- 1 octet of node number OCTET STRING (SIZE (3)) DdpSocketAddress ::= -- 2 octets of net number -- in network byte order, -- 1 octet of node number, -- 1 octet of socket number -- (0..255) OCTET STRING (SIZE (4)) ATName ::= -- 0 to 32 octets of AppleTalk -- ASCII [Inside AppleTalk] OCTET STRING (SIZE (0..32)) llap OBJECT IDENTIFIER ::= { appletalk 1 } aarp OBJECT IDENTIFIER ::= { appletalk 2 } atport OBJECT IDENTIFIER ::= { appletalk 3 } ddp OBJECT IDENTIFIER ::= { appletalk 4 } rtmp OBJECT IDENTIFIER ::= { appletalk 5 } kip OBJECT IDENTIFIER ::= { appletalk 6 } zipRouter OBJECT IDENTIFIER ::= { appletalk 7 } nbp OBJECT IDENTIFIER ::= { appletalk 8 } atecho OBJECT IDENTIFIER ::= { appletalk 9 } atp OBJECT IDENTIFIER ::= { appletalk 10 } pap OBJECT IDENTIFIER ::= { appletalk 11 } asp OBJECT IDENTIFIER ::= { appletalk 12 } adsp OBJECT IDENTIFIER ::= { appletalk 13 } atportptop OBJECT IDENTIFIER ::= { appletalk 14 } rtmpStub OBJECT IDENTIFIER ::= { appletalk 16 } zipEndNode OBJECT IDENTIFIER ::= { appletalk 17 } perPort OBJECT IDENTIFIER ::= { appletalk 18 } -- The LLAP Group -- -- Implementation of this group is mandatory for all -- entities that implement LLAP -- -- Notes for the interfaces group -- -- When implementing the Interfaces Group of MIB-II, it is -- suggested that the following values be used for any -- LocalTalk interfaces: -- ifMtu: 600 -- ifSpeed: 230000 -- ifPhysAddress: the one octet node number for the -- particular interface -- -- Note also that LLAP control packets should not be -- included in the Interfaces Group packet or octet -- counters. llapTable OBJECT-TYPE SYNTAX SEQUENCE OF LlapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The list of LLAP entries." ::= { llap 1 } llapEntry OBJECT-TYPE SYNTAX LlapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An LLAP entry containing objects for the LocalTalk Link Access Protocol for a particular LocalTalk interface. As an example, an instance of the llapOutPkts object might be named llapOutPks.1" INDEX { llapIfIndex } ::= { llapTable 1 } LlapEntry ::= SEQUENCE { llapIfIndex INTEGER, llapInPkts Counter, llapOutPkts Counter, llapInNoHandlers Counter, llapInLengthErrors Counter, llapInErrors Counter, llapCollisions Counter, llapDefers Counter, llapNoDataErrors Counter, llapRandomCTSErrors Counter, llapFCSErrors Counter } llapIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The LLAP interface to which this entry pertains. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { llapEntry 1 } -- this object has been deprecated because it duplicates the -- sum of the MIB-II variables ifInUcastPkts and -- ifInNUcastPkts llapInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The total number of good data packets received on this LocalTalk interface." ::= { llapEntry 2 } -- this object has been deprecated because it duplicates the -- sum of the MIB-II variables ifOutUcastPkts and -- ifOutNUcastPkts llapOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The total number of data packets transmitted on this LocalTalk interface." ::= { llapEntry 3 } -- this object has been deprecated because it duplicates the -- MIB-II variable ifInUnknownProtos llapInNoHandlers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The total number of good packets received on this LocalTalk interface for which there was no protocol handler." ::= { llapEntry 4 } llapInLengthErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets received on this LocalTalk interface whose actual length did not match the length in the header." ::= { llapEntry 5 } -- this object has been deprecated because it duplicates the -- MIB-II variable ifInErrors llapInErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The total number of packets containing errors received on this LocalTalk interface." ::= { llapEntry 6 } llapCollisions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of collisions assumed on this LocalTalk interface due to the lack of a lapCTS reply." ::= { llapEntry 7 } llapDefers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of times this LocalTalk interface deferred to other packets." ::= { llapEntry 8 } llapNoDataErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of times this LocalTalk interface received a lapRTS packet and expected a data packet, but did not receive any data packet." ::= { llapEntry 9 } llapRandomCTSErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of times this LocalTalk interface received a lapCTS packet that was not solicited by a lapRTS packet." ::= { llapEntry 10 } llapFCSErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of times this LocalTalk interface received a packet with an FCS (Frame Check Sequence) error." ::= { llapEntry 11 } -- The AARP Group -- -- Implementation of this group is mandatory for all entities -- that implement AARP aarpTable OBJECT-TYPE SYNTAX SEQUENCE OF AarpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The AppleTalk Address Translation Table contains an equivalence of AppleTalk Network Addresses to the link layer physical address." ::= { aarp 1 } aarpEntry OBJECT-TYPE SYNTAX AarpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains one AppleTalk Network Address to physical address equivalence. As an example, an instance of the aarpPhysAddress object might be named aarpPhysAddress.1.0.80.234" INDEX { aarpIfIndex, aarpNetAddress } ::= { aarpTable 1 } AarpEntry ::= SEQUENCE { aarpIfIndex INTEGER, aarpPhysAddress OCTET STRING, aarpNetAddress DdpNodeAddress, aarpStatus INTEGER } aarpIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { aarpEntry 1 } aarpPhysAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The media-dependent physical address." ::= { aarpEntry 2 } aarpNetAddress OBJECT-TYPE SYNTAX DdpNodeAddress ACCESS read-only STATUS mandatory DESCRIPTION "The AppleTalk Network Address corresponding to the media-dependent physical address." ::= { aarpEntry 3 } aarpStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The status of this AARP entry. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the aarpTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant aarpStatus object." ::= { aarpEntry 4 } aarpLookups OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the AARP cache for this entity was searched." ::= { aarp 2 } aarpHits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times an entry was searched for and found in the AARP cache for this entity." ::= { aarp 3 } -- The ATPort Group -- -- Implementation of this group is mandatory for all entities -- that implement AppleTalk ports -- -- Note that to be compliant with this group, all variables -- that have read-write access must be implemented as -- read-write. atportTable OBJECT-TYPE SYNTAX SEQUENCE OF AtportEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of AppleTalk ports for this entity." ::= { atport 1 } atportEntry OBJECT-TYPE SYNTAX AtportEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The description of one of the AppleTalk ports on this entity. As an example, an instance of the atportNetFrom object might be named atportNetFrom.2" INDEX { atportIndex } ::= { atportTable 1 } AtportEntry ::= SEQUENCE { atportIndex INTEGER, atportDescr DisplayString, atportType INTEGER, atportNetStart ATNetworkNumber, atportNetEnd ATNetworkNumber, atportNetAddress DdpNodeAddress, atportStatus INTEGER, atportNetConfig INTEGER, atportZoneConfig INTEGER, atportZoneDefault ATName, atportIfIndex INTEGER, atportNetFrom DdpNodeAddress, atportZoneFrom DdpNodeAddress, atportInPkts Counter, atportOutPkts Counter, atportHome INTEGER, atportCurrentZone ATName, atportConflictPhysAddr OCTET STRING } atportIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each AppleTalk port. Its value is between 1 and the total number of AppleTalk ports. The value for each port must remain constant at least from the re-initialization of the entity's network management system to the next re-initialization." ::= { atportEntry 1 } atportDescr OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "A text string containing information about the port. This string is intended for presentation to a human; it must not contain anything but printable ASCII characters." ::= { atportEntry 2 } -- Several objects throughout the MIB key off of atportType to -- determine the format of OCTET STRING addresses of peers. -- The address formats are as follows: -- localtalk, ethertalk1, ethertalk2, tokentalk, iptalk, -- fdditalk, smdstalk, arctalk, and virtual take the -- format of DdpNodeAddress -- serialPPP: null OCTET STRING -- serialNonstandard: vendor specific -- aurp: see AURP MIB to determine format -- frameRelay: 32 bit DLCI in network byte order -- (OCTET STRING (SIZE (4))) -- x25: X121Address (see RFC 1382) -- ip: IP address (OCTET STRING (SIZE (4))) -- osi: NSAP (OCTET STRING (SIZE (3..20))) -- decnetIV: 6 bit area, 10 bit host in network byte order -- (OCTET STRING (SIZE (2))) -- arap: ??? -- nonAppleTalk3Com: based on ifType -- ipx: 32 bit network number in network byte order -- followed by datalink address of host -- arns: 32 bit ARNS header -- hdlc: DdpNodeAddress or null OCTET STRING atportType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following localtalk(2), ethertalk1(3), ethertalk2(4), tokentalk(5), iptalk(6), serialPPP(7), serialNonstandard(8), virtual(9), -- an internal interface fdditalk(10), arctalk(11), smdstalk(12), aurp(13), frameRelay(14), x25(15), ip(16), osi(17), decnetIV(18), arap(19), isdnInThePacketMode(20), nonAppleTalk3Com(21), ipx(22), arns(23), hdlc(24) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of port, distinguished by the protocol immediately below DDP in the protocol stack." ::= { atportEntry 3 } atportNetStart OBJECT-TYPE SYNTAX ATNetworkNumber ACCESS read-write STATUS mandatory DESCRIPTION "The first AppleTalk network address in the range configured for this port. If this port is not a native AppleTalk port, this object shall have the value of two octets of zero." ::= { atportEntry 4 } atportNetEnd OBJECT-TYPE SYNTAX ATNetworkNumber ACCESS read-write STATUS mandatory DESCRIPTION "The last AppleTalk network address in the range configured for this port. If the network to which this AppleTalk port is connected is a non-extended network, or if it is not a native AppleTalk port, the value for atportNetEnd shall be two octets of zero." ::= { atportEntry 5 } atportNetAddress OBJECT-TYPE SYNTAX DdpNodeAddress ACCESS read-write STATUS mandatory DESCRIPTION "The AppleTalk network address configured for this port. In addition, this value may be used as a hint for an initial node number used during node-finding. If this port is not a native AppleTalk port, this object shall have the value of three octets of zero." ::= { atportEntry 6 } atportStatus OBJECT-TYPE SYNTAX INTEGER { routing(1), --this port is fully configured & routing unconfigured(2), off(3), invalid(4), endNode(5), -- this port is acting as an end node offDueToConflict(6), -- port is off due to -- configuration conflict other(7) -- none of the states defined above } ACCESS read-write STATUS mandatory DESCRIPTION "The configuration status of this port. Setting this object to the value invalid(4) has the effect of invalidating the corresponding entry in the atportTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant atportStatus object." ::= { atportEntry 7 } atportNetConfig OBJECT-TYPE SYNTAX INTEGER { conflictOrientedSeed(1), -- use configured network -- range even if it conflicts with another -- AppleTalk device garnered(2), -- acquire from another AppleTalk device guessed(3), -- generate a "random" network range unconfigured(4), -- no other value applies conflictAverseSeed(5), -- use configured network -- range, but don't come up if it conflicts softSeed(6) -- attempt to use configured network -- range, but use network range from another -- router if our configuration conflicts } ACCESS read-write STATUS mandatory DESCRIPTION "The status of the network information for this port. If this port is not a native AppleTalk port, this object shall have the value unconfigured(4)." ::= { atportEntry 8 } atportZoneConfig OBJECT-TYPE SYNTAX INTEGER { conflictOrientedSeed(1), -- use configured zone -- information even if it conflicts with -- another AppleTalk device garnered(2), -- acquire from another AppleTalk device guessed(3), -- generate "random" zone information unconfigured(4), -- no other value applies conflictAverseSeed(5), -- use configured zone -- information, but don't come up if it -- conflicts softSeed(6) -- attempt to use configured zone -- information, but use zone information -- from another router if our configuration -- conflicts } ACCESS read-write STATUS mandatory DESCRIPTION "The status of the zone information for this port. If this port is not a native AppleTalk port, this object shall have the value unconfigured(4)." ::= { atportEntry 9 } atportZoneDefault OBJECT-TYPE SYNTAX ATName ACCESS read-write STATUS mandatory DESCRIPTION "The name of the default zone for this port. If this port only has one zone, that zone is represented here. If this port is not a native AppleTalk port, this object shall contain an octet string of zero length. When this value is changed in a router, the router must send a zipNotify packet on the associated network." ::= { atportEntry 10 } atportIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The physical interface associated with this AppleTalk port. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { atportEntry 11 } atportNetFrom OBJECT-TYPE SYNTAX DdpNodeAddress ACCESS read-only STATUS mandatory DESCRIPTION "When atportNetConfig is set to garnered(2), this variable contains the DDP address of an entity from which the AppleTalk network number was garnered. When atportNetConfig is set to conflictOrientedSeed(1), conflictAverseSeed(5), or softSeed(6), this variable contains the DDP address of an entity which confirmed or supplied our AppleTalk network number, for example by replying to a ZIP GetNetInfo request. If atportNetConfig is set to guessed(3) or unconfigured(4), or if the entity has not received any network number confirmation, this variable should be set to three octets of zero." ::= { atportEntry 12 } atportZoneFrom OBJECT-TYPE SYNTAX DdpNodeAddress ACCESS read-only STATUS mandatory DESCRIPTION "When atportZoneConfig is set to garnered(2), this variable contains the DDP address of an entity from which the AppleTalk zone list was garnered. When atportZoneConfig is set to conflictOrientedSeed(1), conflictAverseSeed(5), or softSeed(6), this variable contains the DDP address of an entity which confirmed or supplied our AppleTalk zone information, for example by replying to a ZIP GetNetInfo request or a ZIP Query. If atportZoneConfig is set to guessed(3) or unconfigured(4), or if the entity has not received any zone confirmation, this variable should be set to three octets of zero." ::= { atportEntry 13 } atportInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets received by this entity on this port." ::= { atportEntry 14 } atportOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets transmitted by this entity on this port." ::= { atportEntry 15 } atportHome OBJECT-TYPE SYNTAX INTEGER { home(1), notHome(2) } ACCESS read-only STATUS mandatory DESCRIPTION "An indication of whether or not the entity is homed on this port, that is to say, a port on which the entity could perform NBP registrations for services that it chooses to advertise." ::= { atportEntry 16 } atportCurrentZone OBJECT-TYPE SYNTAX ATName ACCESS read-write STATUS mandatory DESCRIPTION "The current zone for the port. In general, this is the zone name in which services on this port will be registered. If this port is not a native AppleTalk port, this object shall contain an octet string of zero length. Note that modifications to this object do not affect the nbpTable." ::= { atportEntry 17 } atportConflictPhysAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The link-layer address of a device which caused this entity to set atportStatus to offDueToConflict(6). If this address is not available, or if the entity has not set atportStatus to offDueToConflict, this object shall be a zero length OCTET STRING." ::= { atportEntry 18 } -- The atportZoneTable stores information about the zones -- associated with each port. The default zone for each -- port is stored in the port's atportZoneDefault variable; -- all other zones for the port are listed in this table. -- If a port only has one zone, it should be stored in the -- port's atportZoneDefault variable, and this table should -- be empty. -- -- One of the indexes for this table is atportZoneName. -- Even though AppleTalk zone name matches are -- case-insensitive, this table will store zone names -- regardless of case. SNMP Get, GetNext and Set operations -- are performed on these (potentially) mixed case strings -- according to the normal SNMP rules with the following -- caveat: in processing a SET request, the agent shall -- perform a case-insensitive search and a case-sensitive -- search. If the case-insensitive search matches and the -- case-sensitive search does not match, the "equivalent" -- zone name exists in another entry with a different -- capitalization and the SET request shall fail due -- to the name being inconsistent (SNMPv1 should return a -- genErr.) This insures that only one version of a zone -- name will appear in each agent, at the expense of forcing -- a management station to query using that exact name. atportZoneTable OBJECT-TYPE SYNTAX SEQUENCE OF AtportZoneEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of zone information for non-default zones on ports." ::= { atport 2 } atportZoneEntry OBJECT-TYPE SYNTAX AtportZoneEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of zone information for a port. As an example, an instance of the atportZoneStatus object might be named atportZoneStatus.2.8.84.119.105.108.105.103.104.116" INDEX { atportZonePort, atportZoneName } ::= { atportZoneTable 1 } AtportZoneEntry ::= SEQUENCE { atportZonePort INTEGER, atportZoneName ATName (SIZE (1..32)), atportZoneStatus INTEGER } atportZonePort OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "An integer representing the port to which this zone belongs. The port identified by a particular value of this object is the same port as identified by the same value of atportIndex." ::= { atportZoneEntry 1 } atportZoneName OBJECT-TYPE SYNTAX ATName (SIZE (1..32)) ACCESS not-accessible STATUS mandatory DESCRIPTION "A zone name configured for the AppleTalk port referred to in the corresponding entry of atportZonePort. When this value is changed in a router, the router must send a zipNotify packet on the associated network." ::= { atportZoneEntry 2 } atportZoneStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The status of this zone entry. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the atportZoneTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant atportZoneStatus object." ::= { atportZoneEntry 3 } -- The DDP Group -- -- Implementation of this group is mandatory for all -- entities that implement DDP -- -- This group consists of DDP variables that would be -- implemented by either a router or an end node. The -- following variables are included: -- ddpOutRequests -- ddpOutShorts -- ddpOutLongs -- ddpInReceives -- ddpInLocalDatagrams -- ddpNoProtocolHandlers -- ddpTooShortErrors -- ddpTooLongErrors -- ddpShortDDPErrors -- ddpChecksumErrors -- ddpListenerTable -- -- Note that the variables in this group are not numbered -- sequentially. This was done so that it was not necessary -- to deprecate variables from RFC 1243. ddpOutRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of DDP datagrams which were supplied to DDP by local DDP clients in requests for transmission. Note that this counter does not include any datagrams counted in ddpForwRequests." ::= { ddp 1 } ddpOutShorts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of short DDP datagrams which were transmitted from this entity." ::= { ddp 2 } ddpOutLongs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of long DDP datagrams which were transmitted from this entity." ::= { ddp 3 } ddpInReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input datagrams received by DDP, including those received in error." ::= { ddp 4 } ddpInLocalDatagrams OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input DDP datagrams for which this entity was their final DDP destination." ::= { ddp 6 } ddpNoProtocolHandlers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of DDP datagrams addressed to this entity that were addressed to an upper layer protocol for which no protocol handler existed." ::= { ddp 7 } ddpTooShortErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input DDP datagrams dropped because the received data length was less than the data length specified in the DDP header or the received data length was less than the length of the expected DDP header." ::= { ddp 9 } ddpTooLongErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input DDP datagrams dropped because they exceeded the maximum DDP datagram size." ::= { ddp 10 } ddpShortDDPErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input DDP datagrams dropped because this entity was not their final destination and their type was short DDP." ::= { ddp 12 } ddpChecksumErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input DDP datagrams for which this DDP entity was their final destination, and which were dropped because of a checksum error." ::= { ddp 14 } ddpListenerTable OBJECT-TYPE SYNTAX SEQUENCE OF DdpListenerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ddpListenerTable stores information for each DDP socket that has a listener." ::= { ddp 15 } ddpListenerEntry OBJECT-TYPE SYNTAX DdpListenerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This ddpListenerEntry contains information about a particular socket that has a socket listener. As an example, an instance of the ddpListenerStatus object might be named ddpListenerStatus.0.80.220.1" INDEX { ddpListenerAddress } ::= { ddpListenerTable 1 } DdpListenerEntry ::= SEQUENCE { ddpListenerAddress DdpSocketAddress, ddpListenerInPkts Counter, ddpListenerStatus INTEGER } ddpListenerAddress OBJECT-TYPE SYNTAX DdpSocketAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "The DDP address that this socket listener is bound to. If this socket listener isn't bound to a particular address, for instance if it is intended for all interfaces, this object shall have the value of three octets of zero followed by one octet of socket number. The socket number must not equal zero." ::= { ddpListenerEntry 1 } ddpListenerInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets received for this listener." ::= { ddpListenerEntry 2 } ddpListenerStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The status of this socket listener. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ddpListenerTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ddpListenerStatus object." ::= { ddpListenerEntry 3 } -- The DDP Router Group -- -- Implementation of this group is required for all routers -- which implement DDP -- -- This group consists of DDP variables that only a router -- would implement. The following variables are included: -- ddpForwRequests -- ddpOutNoRoutes -- ddpBroadcastErrors -- ddpHopCountErrors -- ddpForwardingTable -- -- Note that the variables in this group are not numbered -- sequentially. This was done so that variables from -- RFC 1243 did not need to be deprecated. ddpForwRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of input datagrams for which this entity was not their final DDP destination, as a result of which an attempt was made to find a route to forward them to that final destination." ::= { ddp 5 } ddpOutNoRoutes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of DDP datagrams dropped because a route could not be found to their final destination." ::= { ddp 8 } ddpBroadcastErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input DDP datagrams dropped because this entity was not their final destination and they were addressed to the link level broadcast." ::= { ddp 11 } ddpHopCountErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input DDP datagrams dropped because this entity was not their final destination and their hop count would exceed 15." ::= { ddp 13 } -- The ddpForwardingTable is a read-only table which shows the -- next hop that a datagram will take when being routed to a -- specific network. If a manager wishes to change data in -- this table via SNMP, he must change it in the MIB for the -- routing protocol itself (by incrementing hop counts, -- etc), rather than in this table. This table is derived -- by the managed entity from the information it receives -- from the routing protocols that it supports. -- -- This table also shows the routing table from which the next -- hop was derived. When a MIB is written for an AppleTalk -- routing protocol, it should include the definition of an -- object identifier which will be used in the -- ddpForwardingProto variable defined here. (For example, -- a value for RTMP is defined as { ddp-forw-proto-oids 1 } -- below.) -- -- To look for a specific net N in this table, it is suggested -- that the management station perform a get-next query for -- ddpForwardingNetEnd.(N-1). This will retrieve the correct -- row if it exists in the table. ddpForwardingTable OBJECT-TYPE SYNTAX SEQUENCE OF DdpForwardingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of forwarding entries for DDP. This table contains a route for each AppleTalk network currently known to the entity." ::= { ddp 16 } ddpForwardingEntry OBJECT-TYPE SYNTAX DdpForwardingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A forwarding entry for a particular AppleTalk network. As an example, an instance of the ddpForwardingPort object might be named ddpForwardingPort.0.90" INDEX { ddpForwardingNetEnd } ::= { ddpForwardingTable 1 } DdpForwardingEntry ::= SEQUENCE { ddpForwardingNetEnd ATNetworkNumber, ddpForwardingNetStart ATNetworkNumber, ddpForwardingNextHop OCTET STRING, ddpForwardingProto OBJECT IDENTIFIER, ddpForwardingModifiedTime TimeTicks, ddpForwardingUseCounts Counter, ddpForwardingPort INTEGER } ddpForwardingNetEnd OBJECT-TYPE SYNTAX ATNetworkNumber ACCESS not-accessible STATUS mandatory DESCRIPTION "The last network number in the network range matched by this forwarding entry. This will not be zero even if this corresponds to a non-extended net." ::= { ddpForwardingEntry 1 } ddpForwardingNetStart OBJECT-TYPE SYNTAX ATNetworkNumber ACCESS read-only STATUS mandatory DESCRIPTION "The first network number in the network range matched by this forwarding entry." ::= { ddpForwardingEntry 2 } ddpForwardingNextHop OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The next hop in the route to this entry's destination network. The format of this address can be determined by examinating the atportType corresponding to this entry." ::= { ddpForwardingEntry 3 } ddpForwardingProto OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "The routing mechanism by which this route was learned." ::= { ddpForwardingEntry 4 } ddpForwardingModifiedTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime at the time of the last modification to this entry. The initial value of ddpForwardingModified time shall be the value of sysUpTime at the time the entry is created." ::= { ddpForwardingEntry 5 } ddpForwardingUseCounts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this entry has been used to route a packet to the destination network. Note that this counter is not cleared when the corresponding ddpForwardingNextHop variable changes." ::= { ddpForwardingEntry 6 } ddpForwardingPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The AppleTalk port through which ddpForwardingNextHop is reached. The interface identified by a particular value of this variable is the same interface as identified by the same value of atportIndex." ::= { ddpForwardingEntry 7 } ddpForwProtoOids OBJECT IDENTIFIER ::= { ddp 17 } -- The value to be assigned to ddpForwardingProto when the -- routing protocol is RTMP. rtmpRoutingProto OBJECT IDENTIFIER ::= { ddpForwProtoOids 1 } -- The value to be assigned to ddpForwardingProto when the -- routing protocol is KIP. kipRoutingProto OBJECT IDENTIFIER ::= { ddpForwProtoOids 2 } ddpForwardingTableOverflows OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the entity attempted to add an entry to the forwarding table but failed due to overflow." ::= { ddp 18 } -- The RTMP Group -- -- Implementation of this group is required for all routers -- which implement RTMP rtmpTable OBJECT-TYPE SYNTAX SEQUENCE OF RtmpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of Routing Table Maintenance Protocol entries for this entity." ::= { rtmp 1 } rtmpEntry OBJECT-TYPE SYNTAX RtmpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The route entry to a particular network range. As an example, an instance of the rtmpPort object might be named rtmpPort.0.80" INDEX { rtmpRangeStart } ::= { rtmpTable 1 } RtmpEntry ::= SEQUENCE { rtmpRangeStart ATNetworkNumber, rtmpRangeEnd ATNetworkNumber, rtmpNextHop OCTET STRING, rtmpType INTEGER, rtmpPort INTEGER, rtmpHops INTEGER, rtmpState INTEGER } rtmpRangeStart OBJECT-TYPE SYNTAX ATNetworkNumber ACCESS read-only STATUS mandatory DESCRIPTION "The first DDP network address in the network range to which this routing entry pertains. This is a two octet DDP network address in network byte order." ::= { rtmpEntry 1 } rtmpRangeEnd OBJECT-TYPE SYNTAX ATNetworkNumber ACCESS read-only STATUS mandatory DESCRIPTION "The last DDP network address in the network range to which this routing entry pertains. This is a two octet DDP network address in network byte order. If the network to which this routing entry pertains is a non-extended network, the value for rtmpRangeEnd shall be two octets of zero." ::= { rtmpEntry 2 } rtmpNextHop OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The next internet router in the route to this entry's destination network. The format of this address can be determined by examinating the atportType corresponding to this entry." ::= { rtmpEntry 3 } rtmpType OBJECT-TYPE SYNTAX INTEGER { other(1), appletalk(2), serialPPP(3), serialNonstandard(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of network over which this route points." ::= { rtmpEntry 4 } rtmpPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The AppleTalk port over which this route points. The interface identified by a particular value of this variable is the same interface as identified by the same value of atportIndex." ::= { rtmpEntry 5 } rtmpHops OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of hops required to reach the destination network to which this routing entry pertains." ::= { rtmpEntry 6 } rtmpState OBJECT-TYPE SYNTAX INTEGER { good(1), suspect(2), badZero(3), badOne(4), invalid(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The status of the information contained in this route entry. Setting this object to the value invalid(5) has the effect of invalidating the corresponding entry in the rtmpTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant rtmpState object." ::= { rtmpEntry 7 } rtmpInDataPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of the number of good RTMP data packets received by this entity." ::= { rtmp 2 } rtmpOutDataPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of the number of RTMP packets sent by this entity." ::= { rtmp 3 } rtmpInRequestPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of the number of good RTMP Request packets received by this entity." ::= { rtmp 4 } rtmpNextIREqualChanges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of the number of times RTMP changes the Next Internet Router in a routing entry because the hop count advertised in a routing tuple was equal to the current hop count for a particular network." ::= { rtmp 5 } rtmpNextIRLessChanges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of the number of times RTMP changes the Next Internet Router in a routing entry because the hop count advertised in a routing tuple was less than the current hop count for a particular network." ::= { rtmp 6 } rtmpRouteDeletes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of the number of times RTMP deletes a route because it was aged out of the table. This can help to detect routing problems." ::= { rtmp 7 } rtmpRoutingTableOverflows OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times RTMP attempted to add a route to the RTMP table but failed due to lack of space." ::= { rtmp 8 } -- The RTMP Stub Group -- -- Implementation of this group is mandatory for all -- entities that implement RTMP -- -- It is intended that this group be implemented by routers -- and end nodes. rtmpOutRequestPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of the number of RTMP Request packets sent by this entity." ::= { rtmpStub 1 } rtmpInVersionMismatches OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of the number of RTMP packets received by this entity that were rejected due to a version mismatch." ::= { rtmpStub 2 } rtmpInErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of the number of RTMP packets received by this entity that were rejected for an error other than version mismatch." ::= { rtmpStub 3 } -- The KIP Group -- -- Implementation of this group is mandatory for all -- entities that implement KIP kipTable OBJECT-TYPE SYNTAX SEQUENCE OF KipEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of routing information for KIP networks." ::= { kip 1 } kipEntry OBJECT-TYPE SYNTAX KipEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the routing table for KIP networks. As an example, an instance of the kipCore object might be named kipCore.0.80" INDEX { kipNetStart } ::= { kipTable 1 } KipEntry ::= SEQUENCE { kipNetStart ATNetworkNumber, kipNetEnd ATNetworkNumber, kipNextHop IpAddress, kipHopCount INTEGER, kipBCastAddr IpAddress, kipCore INTEGER, kipType INTEGER, kipState INTEGER, kipShare INTEGER, kipFrom IpAddress } kipNetStart OBJECT-TYPE SYNTAX ATNetworkNumber ACCESS read-only STATUS mandatory DESCRIPTION "The first AppleTalk network address in the range for this routing entry. This address is a two octet DDP network address in network byte order." ::= { kipEntry 1 } kipNetEnd OBJECT-TYPE SYNTAX ATNetworkNumber ACCESS read-write STATUS mandatory DESCRIPTION "The last AppleTalk network address in the range for this routing entry. This address is a two octet DDP network address in network byte order. If the network to which this AppleTalk port is connected is a non-extended network, the value for kipNetEnd shall be two octets of zero." ::= { kipEntry 2 } kipNextHop OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the next hop in the route to this entry's destination network." ::= { kipEntry 3 } kipHopCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of hops required to reach the destination network to which this entry pertains." ::= { kipEntry 4 } kipBCastAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The form of the IP address used to broadcast on this network." ::= { kipEntry 5 } kipCore OBJECT-TYPE SYNTAX INTEGER { core(1), notcore(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The status of kipNextHop as a core gateway." ::= { kipEntry 6 } kipType OBJECT-TYPE SYNTAX INTEGER { kipRouter(1), net(2), host(3), other(4), async(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of the entity that this route points to." ::= { kipEntry 7 } kipState OBJECT-TYPE SYNTAX INTEGER { configured(1), -- this entry is not aged learned(2), invalid(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The state of this network entry. Setting this object to the value invalid(3) has the effect of invalidating the corresponding entry in the kipTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant kipState object." ::= { kipEntry 8 } kipShare OBJECT-TYPE SYNTAX INTEGER { shared(1), private(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If the information in this entry is propagated to other routers as part of the AA routing protocol, the value of this variable is equal to shared(1). Otherwise its value is private(2)." ::= { kipEntry 9 } kipFrom OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address from which the routing entry was learned via the AA protocol. If this entry was not created via the AA protocol, it should contain IP address 0.0.0.0." ::= { kipEntry 10 } -- The ZIP Router Group -- -- Implementation of this group is required for all routers -- which implement ZIP -- -- This group consists of ZIP variables that would be -- implemented by a router. zipTable OBJECT-TYPE SYNTAX SEQUENCE OF ZipEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of zone information for reachable AppleTalk networks." ::= { zipRouter 1 } zipEntry OBJECT-TYPE SYNTAX ZipEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of zone information for a particular zone and network combination. As an example, an instance of the zipZoneState object might be named zipZoneState.0.80.4" INDEX { zipZoneNetStart, zipZoneIndex } ::= { zipTable 1 } ZipEntry ::= SEQUENCE { zipZoneName ATName, zipZoneIndex INTEGER, zipZoneNetStart ATNetworkNumber, zipZoneNetEnd ATNetworkNumber, zipZoneState INTEGER, zipZoneFrom OCTET STRING, zipZonePort INTEGER } zipZoneName OBJECT-TYPE SYNTAX ATName ACCESS read-only STATUS mandatory DESCRIPTION "The zone name of this entry. This is stored in Mac ASCII format. If the full zone list for the entry is not known, the value for zipZoneName shall be a zero length octet string." ::= { zipEntry 1 } zipZoneIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An integer that is unique to the zipZoneName that is present in this entry. For any given zone name, every zipEntry that has an equal zone name will have the same zipZoneIndex. When a zone name is discovered which is not currently in the table, it will be assigned an index greater than any previously assigned index." ::= { zipEntry 2 } zipZoneNetStart OBJECT-TYPE SYNTAX ATNetworkNumber ACCESS read-only STATUS mandatory DESCRIPTION "The network that starts the range for this entry. This address is a two octet DDP network address in network byte order." ::= { zipEntry 3 } zipZoneNetEnd OBJECT-TYPE SYNTAX ATNetworkNumber ACCESS read-only STATUS mandatory DESCRIPTION "The network that ends the range for this entry. This address is a two octet DDP network address in network byte order. If the network to which this zip entry pertains is a non-extended network, the value for zipZoneNetEnd shall be two octets of zero." ::= { zipEntry 4 } zipZoneState OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The state of this zip entry. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the zipTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant zipZoneState object." ::= { zipEntry 5 } zipZoneFrom OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The address from which this zone name to network number mapping was learned. The format of this address can be determined by examining the atportType corresponding to this entry. When this mapping is learned from the entity itself, this object shall have the value of three octets of zero." ::= { zipEntry 6 } zipZonePort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The AppleTalk port through which this zone name to network number mapping was learned. The interface identified by a particular value of this variable is the same interface as identified by the same value of atportIndex." ::= { zipEntry 7 } zipInZipQueries OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ZIP Queries received by this entity." ::= { zipRouter 2 } zipInZipReplies OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ZIP Replies received by this entity." ::= { zipRouter 3 } zipInZipExtendedReplies OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ZIP Extended Replies received by this entity." ::= { zipRouter 4 } zipZoneConflictErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times a conflict has been detected between this entity's zone information and another entity's zone information." ::= { zipRouter 5 } zipInObsoletes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ZIP Takedown or ZIP Bringup packets received by this entity. Note that as the ZIP Takedown and ZIP Bringup packets have been obsoleted, the receipt of one of these packets indicates that a node sent it in error." ::= { zipRouter 6 } -- The zipRouterNetInfoTable is used to record information -- about zipGetNetInfo and zipGetNetInfo Reply packets that -- were received on each port for a router. This table -- augments the atportTable. zipRouterNetInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF ZipRouterNetInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of Net Info packets received by each port on this entity." ::= { zipRouter 7 } zipRouterNetInfoEntry OBJECT-TYPE SYNTAX ZipRouterNetInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The description of the Net Info packets received on a particular port on this entity. One such entry shall exist for each atport on this router entity. As an example, an instance of the zipInGetNetInfos object might be named zipInGetNetInfos.2" INDEX { atportIndex } ::= { zipRouterNetInfoTable 1 } ZipRouterNetInfoEntry ::= SEQUENCE { zipInGetNetInfos Counter, zipOutGetNetInfoReplies Counter, zipZoneOutInvalids Counter, zipAddressInvalids Counter } zipInGetNetInfos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ZIP GetNetInfo packets received on this port by this entity." ::= { zipRouterNetInfoEntry 1 } zipOutGetNetInfoReplies OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ZIP GetNetInfo Reply packets sent out this port by this entity." ::= { zipRouterNetInfoEntry 2 } zipZoneOutInvalids OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this entity has sent a ZIP GetNetInfo Reply with the zone invalid bit set in response to a GetNetInfo Request with an invalid zone name." ::= { zipRouterNetInfoEntry 3 } zipAddressInvalids OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this entity had to broadcast a ZIP GetNetInfo Reply because the GetNetInfo Request had an invalid address." ::= { zipRouterNetInfoEntry 4 } -- The ZIP End Node Group -- -- Implementation of this group is mandatory for all entities -- that implement ZIP -- -- This group consists of ZIP variables that would be -- implemented by either a router or an end node. -- The zipNetInfoTable is used to record information about -- zipGetNetInfo and zipGetNetInfo Reply packets that were -- received on each port of an entity. This table augments -- the atportTable. zipNetInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF ZipNetInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of Net Info packets received by each port on this entity." ::= { zipEndNode 1 } zipNetInfoEntry OBJECT-TYPE SYNTAX ZipNetInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The description of the Net Info packets received on a particular port on this entity. One such entry shall exist for each atport on this entity. As an example, an instance of the zipOutGetNetInfos object might be named zipOutGetNetInfos.2" INDEX { atportIndex } ::= { zipNetInfoTable 1 } ZipNetInfoEntry ::= SEQUENCE { zipOutGetNetInfos Counter, zipInGetNetInfoReplies Counter, zipZoneInInvalids Counter } zipOutGetNetInfos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ZIP GetNetInfo packets sent out this port by this entity." ::= { zipNetInfoEntry 1 } zipInGetNetInfoReplies OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ZIP GetNetInfo Reply packets received on this port by this entity." ::= { zipNetInfoEntry 2 } zipZoneInInvalids OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this entity has received a ZIP GetNetInfo Reply with the zone invalid bit set because the corresponding GetNetInfo Request had an invalid zone name." ::= { zipNetInfoEntry 3 } zipInErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ZIP packets received by this entity that were rejected for any error." ::= { zipEndNode 2 } -- The NBP Group -- -- Implementation of this group is mandatory for all entities -- that implement NBP nbpTable OBJECT-TYPE SYNTAX SEQUENCE OF NbpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of NBP services registered on this entity." ::= { nbp 1 } nbpEntry OBJECT-TYPE SYNTAX NbpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The description of an NBP service registered on this entity. As an example, an instance of the nbpZone object might be named nbpZone.2" INDEX { nbpIndex } ::= { nbpTable 1 } NbpEntry ::= SEQUENCE { nbpIndex INTEGER, nbpObject ATName (SIZE (1..32)), nbpType ATName (SIZE (1..32)), nbpZone ATName, nbpState INTEGER, nbpAddress DdpSocketAddress, nbpEnumerator INTEGER (0..255) } nbpIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The index of this NBP entry. This index is unique with respect to the indexes of all other NBP entries, and shall remain constant throughout the lifetime of this object." ::= { nbpEntry 1 } nbpObject OBJECT-TYPE SYNTAX ATName (SIZE (1..32)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the service described by this entity. When this variable is changed, the entity should perform an NBP registration using the new nbpObject." ::= { nbpEntry 2 } nbpType OBJECT-TYPE SYNTAX ATName (SIZE (1..32)) ACCESS read-write STATUS mandatory DESCRIPTION "The type of the service described by this entity. When this variable is changed, the entity should perform an NBP registration using the new nbpType." ::= { nbpEntry 3 } nbpZone OBJECT-TYPE SYNTAX ATName ACCESS read-write STATUS mandatory DESCRIPTION "The zone the service described by this entity is registered in. This must be the actual zone name, without any wildcard characters. When this variable is changed, the entity should perform an NBP registration using the new nbpZone." ::= { nbpEntry 4 } nbpState OBJECT-TYPE SYNTAX INTEGER { valid(1), registering(2), -- attempting to register the service registrationFailed(3), invalid(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The state of this NBP entry. When the registration for an entry in the nbpTable fails, it is an implementation-specific matter as to how long the entry will remain in the registrationFailed(3) state before moving to the invalid(4) state. Note that the entry may pass immediately from the registrationFailed state to the invalid state. Setting this object to the value invalid(4) has the effect of invalidating the corresponding entry in the nbpTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant nbpState object." ::= { nbpEntry 5 } nbpAddress OBJECT-TYPE SYNTAX DdpSocketAddress ACCESS read-write STATUS mandatory DESCRIPTION "The DDP network, node, and socket number of this entity. If this is unspecified, for instance if the registration is on all ports of a multiport device, this object shall have the value of three octets of zero, followed by one octet of socket number." ::= { nbpEntry 6 } nbpEnumerator OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The enumerator assigned to this entity." ::= { nbpEntry 7 } nbpInLookUpRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of NBP LookUp Requests received." ::= { nbp 2 } nbpInLookUpReplies OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of NBP LookUp Replies received." ::= { nbp 3 } nbpInBroadcastRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of NBP Broadcast Requests received." ::= { nbp 4 } nbpInForwardRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of NBP Forward Requests received." ::= { nbp 5 } nbpOutLookUpReplies OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of NBP LookUp Replies sent." ::= { nbp 6 } nbpRegistrationFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this node experienced a failure in attempting to register an NBP entity." ::= { nbp 7 } nbpInErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of NBP packets received by this entity that were rejected for any error." ::= { nbp 8 } -- The ATEcho Group -- -- Implementation of this group is mandatory for all -- entities that implement ATEcho atechoRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of AppleTalk Echo requests received." ::= { atecho 1 } atechoReplies OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of AppleTalk Echo replies sent." ::= { atecho 2 } atechoOutRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of AppleTalk Echo requests sent." ::= { atecho 3 } atechoInReplies OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of AppleTalk Echo replies received." ::= { atecho 4 } -- The ATP Group -- -- Implementation of this group is mandatory for all entities -- that implement ATP atpInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ATP packets received by this entity." ::= { atp 1 } atpOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ATP packets sent by this entity." ::= { atp 2 } atpTRequestRetransmissions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times that a timeout occurred and a Transaction Request packet needed to be retransmitted by this host." ::= { atp 3 } atpTResponseRetransmissions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times a timeout was detected and a Transaction Response packet needed to be retransmitted by this host." ::= { atp 4 } atpReleaseTimerExpiredCounts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the release timer expired, as a result of which a Request Control Block had to be deleted." ::= { atp 5 } atpRetryCountExceededs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the retry count was exceeded, and an error was returned to the client of ATP." ::= { atp 6 } atpListenerTable OBJECT-TYPE SYNTAX SEQUENCE OF AtpListenerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The atpListenerTable stores information for each ATP socket that has a listener." ::= { atp 7 } atpListenerEntry OBJECT-TYPE SYNTAX AtpListenerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This atpListenerEntry contains information about a particular socket that has a socket listener. As an example, an instance of the atpListenerStatus object might be named atpListenerStatus.0.80.220.3" INDEX { atpListenerAddress } ::= { atpListenerTable 1 } AtpListenerEntry ::= SEQUENCE { atpListenerAddress DdpSocketAddress, atpListenerStatus INTEGER } atpListenerAddress OBJECT-TYPE SYNTAX DdpSocketAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "The DDP address that this socket listener is bound to. If this socket listener isn't bound to a particular address, for instance if it is intended for all interfaces, this object shall have the value of three octets of zero followed by one octet of socket number." ::= { atpListenerEntry 1 } atpListenerStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The status of this socket. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the atpListenerTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant atpListenerStatus object." ::= { atpListenerEntry 2 } -- The PAP group -- -- Implementation of this group is mandatory for all entities -- that implement PAP papInOpenConns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of PAP Open Connection requests received by this entity." ::= { pap 1 } papOutOpenConns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of PAP Open Connection requests sent by this entity." ::= { pap 2 } papInDatas OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of PAP Data messages received by this entity." ::= { pap 3 } papOutDatas OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of PAP Data messages sent by this entity." ::= { pap 4 } papInCloseConns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of PAP Close Connection requests received by this entity." ::= { pap 5 } papOutCloseConns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of PAP Close Connection requests sent by this entity." ::= { pap 6 } papTickleTimeoutCloses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the PAP entity on this node closed a connection because it didn't receive a Tickle message before its timer expired." ::= { pap 7 } papServerTable OBJECT-TYPE SYNTAX SEQUENCE OF PapServerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of servers on this entity that are accessible through the Printer Access Protocol." ::= { pap 8 } papServerEntry OBJECT-TYPE SYNTAX PapServerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A set of information about a particular PAP server's configuration and performance. As an example, an instance of the papServerStatus object might be named papServerStatus.1" INDEX { papServerIndex } ::= { papServerTable 1 } PapServerEntry ::= SEQUENCE { papServerIndex INTEGER, papServerListeningSocket DdpSocketAddress, papServerStatus DisplayString, papServerCompletedJobs Counter, papServerBusyJobs INTEGER, papServerFreeJobs INTEGER, papServerAuthenticationFailures Counter, papServerAccountingFailures Counter, papServerGeneralFailures Counter, papServerState INTEGER, papServerLastStatusMsg DisplayString } papServerIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "An unique value for each Printer Access Protocol Server." ::= { papServerEntry 1 } papServerListeningSocket OBJECT-TYPE SYNTAX DdpSocketAddress ACCESS read-write STATUS mandatory DESCRIPTION "The Server Listening Socket that this PAP server is listening on." ::= { papServerEntry 2 } papServerStatus OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The status string of this server. This is the message as it would appear in a PAP Status Reply from this server." ::= { papServerEntry 3 } papServerCompletedJobs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of jobs that have been accepted and successfully executed by this server." ::= { papServerEntry 4 } papServerBusyJobs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of GetNextJob calls that have accepted and are currently executing a job." ::= { papServerEntry 5 } papServerFreeJobs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The minimum number of GetNextJob calls that are currently waiting for a job." ::= { papServerEntry 6 } papServerAuthenticationFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this PAP server rejected a job because the job was not correctly authenticated." ::= { papServerEntry 7 } papServerAccountingFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this PAP server rejected a job because the job did not fit some accounting rule, such as exceeding a quota." ::= { papServerEntry 8 } papServerGeneralFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this PAP server rejected a job for some reason other than authentication or accounting failures." ::= { papServerEntry 9 } papServerState OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The state of this PAP Server entry. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the papServerTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant papServerState object." ::= { papServerEntry 10 } papServerLastStatusMsg OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The last status message that was transmitted by this server." ::= { papServerEntry 11 } -- The ASP Group -- -- Implementation of this group is mandatory for all entities -- that implement ASP aspInputTransactions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ASP requests and replies received by this entity. Note that this is not necessarily the number of packets containing ASP transactions." ::= { asp 1 } aspOutputTransactions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ASP requests and replies sent by this entity. Note that this is not necessarily the number of packets containing ASP transactions." ::= { asp 2 } aspInOpenSessions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ASP Open Session requests and replies received by this entity." ::= { asp 3 } aspOutOpenSessions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ASP Open Session requests and replies sent by this entity." ::= { asp 4 } aspInCloseSessions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ASP Close Session requests and replies received by this entity." ::= { asp 5 } aspOutCloseSessions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ASP Close Session requests and replies sent by this entity." ::= { asp 6 } aspNoMoreSessionsErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times an error condition was returned because this server implementation could not support another session." ::= { asp 7 } aspTickleTimeOutCloses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the ASP entity on this node closed a connection because it didn't receive any messages from the remote end before its timer expired." ::= { asp 8 } aspConnTable OBJECT-TYPE SYNTAX SEQUENCE OF AspConnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of ASP connections on this entity." ::= { asp 9 } aspConnEntry OBJECT-TYPE SYNTAX AspConnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A set of information describing an ASP connection. As an example, an instance of the aspConnState object might be named aspConnState.0.80.220.135.0.80.239.119.12" INDEX { aspConnLocalAddress, aspConnRemoteAddress, aspConnID } ::= { aspConnTable 1 } AspConnEntry ::= SEQUENCE { aspConnLocalAddress DdpSocketAddress, aspConnRemoteAddress DdpSocketAddress, aspConnID INTEGER (1..255), aspConnLastReqNum INTEGER (1..65535), aspConnServerEnd INTEGER, aspConnState INTEGER } aspConnLocalAddress OBJECT-TYPE SYNTAX DdpSocketAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "The local address of this ASP connection." ::= { aspConnEntry 1 } aspConnRemoteAddress OBJECT-TYPE SYNTAX DdpSocketAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "The remote address of this ASP connection. If this entry is in the listening mode, this object shall have a value of four octets of zero." ::= { aspConnEntry 2 } aspConnID OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS not-accessible STATUS mandatory DESCRIPTION "The remote Connection ID of this ASP connection. If this entry is in the listening mode, this object shall have a value of zero." ::= { aspConnEntry 3 } aspConnLastReqNum OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The last request number on this ASP connection. If this entry is in the listening mode, this object shall have a value of zero." ::= { aspConnEntry 4 } aspConnServerEnd OBJECT-TYPE SYNTAX INTEGER { sss(1), -- Server Session Socket wss(2), -- Workstation Session Socket sls(3) -- Server Listening Socket } ACCESS read-only STATUS mandatory DESCRIPTION "Specifies what mode the local session end is in." ::= { aspConnEntry 5 } aspConnState OBJECT-TYPE SYNTAX INTEGER { open(1), closed(2), invalid(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The state of this ASP connection. Setting this object to the value invalid(3) has the effect of invalidating the corresponding entry in the aspConnTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant aspConnState object." ::= { aspConnEntry 6 } -- The ADSP Group -- -- Implementation of this group is mandatory for all entities -- that implement ADSP adspInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ADSP packets received by this entity." ::= { adsp 1 } adspOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ADSP packets sent by this entity." ::= { adsp 2 } adspInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of data octets contained in ADSP packets received by this entity. Note that this does not include EOM bits." ::= { adsp 3 } adspOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of data octets contained in ADSP packets sent by this entity. Note that this does not include EOM bits." ::= { adsp 4 } adspInDataPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ADSP data packets this entity has received." ::= { adsp 5 } adspOutDataPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ADSP data packets this entity has sent." ::= { adsp 6 } adspTimeoutErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the ADSP on this entity detected an expired connection timer." ::= { adsp 7 } adspTimeoutCloseErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the ADSP on this entity closed a connection because of too many timeouts." ::= { adsp 8 } adspConnTable OBJECT-TYPE SYNTAX SEQUENCE OF AdspConnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of ADSP connections on this entity." ::= { adsp 9 } adspConnEntry OBJECT-TYPE SYNTAX AdspConnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A set of information describing an ADSP connection. As an example, an instance of the adspConnState object might be named adspConnState.0.80.220.7.0.80.239.142.31231" INDEX { adspConnLocalAddress, adspConnRemoteAddress, adspConnLocalConnID } ::= { adspConnTable 1 } AdspConnEntry ::= SEQUENCE { adspConnLocalAddress DdpSocketAddress, adspConnLocalConnID INTEGER (0..65535), adspConnRemoteAddress DdpSocketAddress, adspConnRemoteConnID INTEGER (0..65535), adspConnState INTEGER } adspConnLocalAddress OBJECT-TYPE SYNTAX DdpSocketAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "The local DDP address of this ADSP connection." ::= { adspConnEntry 1 } adspConnLocalConnID OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "The local Connection ID of this ADSP connection. If this entry specifies an ADSP listener, this value shall be zero." ::= { adspConnEntry 2 } adspConnRemoteAddress OBJECT-TYPE SYNTAX DdpSocketAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "The remote DDP address of this ADSP connection. If this entry specifies an ADSP listener, this value shall be zero." ::= { adspConnEntry 3 } adspConnRemoteConnID OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The remote Connection ID of this ADSP connection. If this entry specifies an ADSP listener, this value shall be zero." ::= { adspConnEntry 4 } adspConnState OBJECT-TYPE SYNTAX INTEGER { open(1), localHalfOpen(2), remoteHalfOpen(3), listening(4), closed(5), invalid(6) } ACCESS read-write STATUS mandatory DESCRIPTION "The state of this ADSP connection. The state is open if both ends are established. If only one end is established, then the state is half-open. If neither end is established, then the state is closed. If an ADSP server is listening on a socket and is not yet connected, its state is set to listening, and the adspConnRemoteAddress, adspConnRemoteSocket, adspConnRemoteConnID, and adspConnRemoteWindowSize are all set to zero. Setting this object to the value invalid(6) has the effect of invalidating the corresponding entry in the adspConnTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant adspConnState object." ::= { adspConnEntry 5 } -- The ATPortPtoP Group -- -- Implementation of this group is mandatory for all entities -- that implement AppleTalk point-to-point links atportPtoPTable OBJECT-TYPE SYNTAX SEQUENCE OF AtportPtoPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of AppleTalk point-to-point connections for this entity." ::= { atportptop 1 } atportPtoPEntry OBJECT-TYPE SYNTAX AtportPtoPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The description of one of the AppleTalk point-to-point connections on this entity. As an example, an instance of the atportPtoPRemoteAddress object might be named atportPtoPRemoteAddress.2" INDEX { atportPtoPIndex } ::= { atportPtoPTable 1 } AtportPtoPEntry ::= SEQUENCE { atportPtoPIndex INTEGER, atportPtoPProtocol OBJECT IDENTIFIER, atportPtoPRemoteName DisplayString, atportPtoPRemoteAddress OCTET STRING, atportPtoPPortIndex INTEGER, atportPtoPStatus INTEGER } atportPtoPIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "A unique value for each AppleTalk point-to-point connection. Its value is between 1 and the total number of AppleTalk point-to-point connections. The value for each connection must remain constant at least from the re-initialization of the entity's network management system to the next re-initialization." ::= { atportPtoPEntry 1 } atportPtoPProtocol OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-write STATUS mandatory DESCRIPTION "The protocol type used over the point-to-point connection." ::= { atportPtoPEntry 2 } atportPtoPRemoteName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "A text string containing the network node name of the entity at the other end of the point-to-point link. If the name is unknown or undefined, then this string is zero length." ::= { atportPtoPEntry 3 } atportPtoPRemoteAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The network address of the entity at the other end of the point-to-point link in network byte order. The format of this address can be determined by examinating the atportType corresponding to this entry. If the address is unknown or undefined, then this string is zero length." ::= { atportPtoPEntry 4 } atportPtoPPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The AppleTalk port associated with this point-to-point connection. The interface identified by a particular value of this index is the same interface as identified by the same value of atportIndex." ::= { atportPtoPEntry 5 } atportPtoPStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The status of this entry in the atportPtoPTable. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the atportPtoPTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examinationr of the relevant atportPtoPStatus object." ::= { atportPtoPEntry 6 } atportPtoPProtoOids OBJECT IDENTIFIER ::= { atportptop 2 } -- A list of values to be used for the atportPtoPProtocol -- variable. -- When new protocols are defined, their oids may be defined -- in separate MIB documents in different branches of the tree. pToPProtoOther OBJECT IDENTIFIER ::= { atportPtoPProtoOids 1 } pToPProtoAurp OBJECT IDENTIFIER ::= { atportPtoPProtoOids 2 } pToPProtoCaymanUdp OBJECT IDENTIFIER ::= { atportPtoPProtoOids 3 } pToPProtoAtkvmsDecnetIV OBJECT IDENTIFIER ::= { atportPtoPProtoOids 4 } pToPProtoLiaisonUdp OBJECT IDENTIFIER ::= { atportPtoPProtoOids 5 } pToPProtoIpx OBJECT IDENTIFIER ::= { atportPtoPProtoOids 6 } pToPProtoShivaIp OBJECT IDENTIFIER ::= { atportPtoPProtoOids 7 } -- The Per Port Counters Group -- -- Implementation of this group is optional. perPortTable OBJECT-TYPE SYNTAX SEQUENCE OF PerPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of per-port statistics for this entity." ::= { perPort 1 } perPortEntry OBJECT-TYPE SYNTAX PerPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The statistics available for a particular port on this entity. As an example, an instance of the perPortAarpInProbes object might be named perPortAarpInProbes.2" INDEX { atportIndex } ::= { perPortTable 1 } PerPortEntry ::= SEQUENCE { perPortAarpInProbes Counter, perPortAarpOutProbes Counter, perPortAarpInReqs Counter, perPortAarpOutReqs Counter, perPortAarpInRsps Counter, perPortAarpOutRsps Counter, perPortDdpInReceives Counter, perPortDdpInLocalDatagrams Counter, perPortDdpNoProtocolHandlers Counter, perPortDdpTooShortErrors Counter, perPortDdpTooLongErrors Counter, perPortDdpChecksumErrors Counter, perPortDdpForwRequests Counter, perPortRtmpInDataPkts Counter, perPortRtmpOutDataPkts Counter, perPortRtmpInRequestPkts Counter, perPortRtmpRouteDeletes Counter, perPortZipInZipQueries Counter, perPortZipInZipReplies Counter, perPortZipInZipExtendedReplies Counter, perPortZipZoneConflictErrors Counter, perPortZipInErrors Counter, perPortNbpInLookUpRequests Counter, perPortNbpInLookUpReplies Counter, perPortNbpInBroadcastRequests Counter, perPortNbpInForwardRequests Counter, perPortNbpOutLookUpReplies Counter, perPortNbpRegistrationFailures Counter, perPortNbpInErrors Counter, perPortEchoRequests Counter, perPortEchoReplies Counter } perPortAarpInProbes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of AARP Probe packets received by this entity on this port." ::= { perPortEntry 1 } perPortAarpOutProbes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of AARP Probe packets sent by this entity on this port." ::= { perPortEntry 2 } perPortAarpInReqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of AARP Request packets received by this entity on this port." ::= { perPortEntry 3 } perPortAarpOutReqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of AARP Request packets sent by this entity on this port." ::= { perPortEntry 4 } perPortAarpInRsps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of AARP Response packets received by this entity on this port." ::= { perPortEntry 5 } perPortAarpOutRsps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of AARP Response packets sent by this entity on this port." ::= { perPortEntry 6 } perPortDdpInReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input datagrams received by DDP on this port, including those received in error." ::= { perPortEntry 7 } perPortDdpInLocalDatagrams OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input DDP datagrams on this port for which this entity was their final DDP destination." ::= { perPortEntry 8 } perPortDdpNoProtocolHandlers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of DDP datagrams addressed to this entity on this port that were addressed to an upper layer protocol for which no protocol handler existed." ::= { perPortEntry 9 } perPortDdpTooShortErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input DDP datagrams on this port dropped because the received data length was less than the data length specified in the DDP header or the received data length was less than the length of the expected DDP header." ::= { perPortEntry 10 } perPortDdpTooLongErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input DDP datagrams on this port dropped because they exceeded the maximum DDP datagram size." ::= { perPortEntry 11 } perPortDdpChecksumErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input DDP datagrams on this port for which this DDP entity was their final destination, and which were dropped because of a checksum error." ::= { perPortEntry 12 } perPortDdpForwRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of input datagrams on this port for which this entity was not their final DDP destination, as a result of which an attempt was made to find a route to forward them to that final destination." ::= { perPortEntry 13 } perPortRtmpInDataPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of the number of good RTMP data packets received by this entity on this port." ::= { perPortEntry 14 } perPortRtmpOutDataPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of the number of RTMP packets sent by this entity on this port." ::= { perPortEntry 15 } perPortRtmpInRequestPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of the number of good RTMP Request packets received by this entity on this port." ::= { perPortEntry 16 } perPortRtmpRouteDeletes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of the number of times RTMP deletes a route on this port because it was aged out of the table." ::= { perPortEntry 17 } perPortZipInZipQueries OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ZIP Queries received by this entity on this port." ::= { perPortEntry 18 } perPortZipInZipReplies OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ZIP Replies received by this entity on this port." ::= { perPortEntry 19 } perPortZipInZipExtendedReplies OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ZIP Extended Replies received by this entity on this port." ::= { perPortEntry 20 } perPortZipZoneConflictErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times a conflict has been detected on this port between this entity's zone information and another entity's zone information." ::= { perPortEntry 21 } perPortZipInErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ZIP packets received by this entity on this port that were rejected for any error." ::= { perPortEntry 22 } perPortNbpInLookUpRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of NBP LookUp Requests received on this port." ::= { perPortEntry 23 } perPortNbpInLookUpReplies OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of NBP LookUp Replies received on this port." ::= { perPortEntry 24 } perPortNbpInBroadcastRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of NBP Broadcast Requests received on this port." ::= { perPortEntry 25 } perPortNbpInForwardRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of NBP Forward Requests received on this port." ::= { perPortEntry 26 } perPortNbpOutLookUpReplies OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of NBP LookUp Replies sent on this port." ::= { perPortEntry 27 } perPortNbpRegistrationFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this node experienced a failure in attempting to register an NBP entity on this port." ::= { perPortEntry 28 } perPortNbpInErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of NBP packets received by this entity on this port that were rejected for any error." ::= { perPortEntry 29 } perPortEchoRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of AppleTalk Echo requests received on this port." ::= { perPortEntry 30 } perPortEchoReplies OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of AppleTalk Echo replies received on this port." ::= { perPortEntry 31 } END